-
NodeMcu ESP8266 Based Wireless Development Module for IOT
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
-
USB 2.0 Cable Type A/B for Arduino UNO
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
₹18.00 -
Micro USB 2.0 Cable Type A/B for Arduino Nano
- Up to 480 Mbps data transfer rate.
- USB Type: Type-A to Mini-B
- Weight: 15 gm
- Length: 30 cm
- Exclusively designed for Arduino boards.
₹18.00 -
White Type C cable – 1m for Arduino Nano V3.0
Features:
- Allows you to connect Arduino NanoV3.0 with USB port to the computer.
- Good data transfer rate.
₹37.62 -
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3
- UNO Case is to enclose Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
₹55.00 -
Proto Shield Prototype expansion board for Arduino UNO
Features:
Power rails down the middle and sides
A reset button and an extra general use button
2x 3mm general use LEDs, red and green, as well as 2 matching resistors
A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
A surface-mount chip area for up to 14 SOIC size parts
Compatible with tiny breadboards
Every pin is brought out
Gold plated pads₹82.00₹90.00 -
Nano And Uno Multi-Purpose Expansion Board For Nano 3.0
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size;
- External power supply current support
- Leads all pins out, convenient for wiring and doing experiments.
₹85.00 -
Expansion Testing Interface Board for Microcontrollers
Features:
Input Output Board for Arduino 8051 AVR Raspberry Pi
8 LEDs and 4 Switches
5V Relay, Buzzer for Output test
TSOP, LDR and LM35D Temperature Sensor for Input Testing
Potentiometer for Varying Sensitivity.₹115.00 -
L293D Motor Driver Shield Expansion Board
- Drive 4 DC motors with speed and direction control
- Drive 2 stepper motors
- Drive 2 servo motors
- 4.5 – 25V motor voltage range
- 1.2A peak current per channel (600mA continuous)
₹125.00 -
Raspberry Pi 3 Official ABS Case Box
The Raspberry Pi 3 Official Case for Raspberry Pi 3 Model B only Red/White is a 5-part Enclosure for Raspberry Pi 2 Model B and Raspberry Pi B+. Official case for the Raspberry Pi from the Raspberry Pi Foundation.This case has a very attractive strawberry red and white color. It is made up of ABS.
₹125.00 -
Key Display For AVR, Boards compatible | New 8-Bit Digital LED Tube 8-Bit TM638 Module | Robotics Science Project
- It only need to read the relevant register to send display data or test button so it save mcu resources effectively., Package contents: 1 key display module for avr arduino
- 8 bits, 8 keys, 8 leds, 8 digital tubes, common cathode led digital tube
- The advantage is only three io ports will be occupied when it drives
- Scm doesn’t need to work for scaning display and key scaning
₹150.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Tools & Equipments
- Bulk/Wholesale
