-
Raspberry Pi 3 Model B Plus
New Original Raspberry Pi 3B Plus Built-in Broadcom 1.4GHz quad-core 64 bit processor with Low Energy On-Board Wifi Bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity.
₹3,450.00₹5,800.00Raspberry Pi 3 Model B Plus
₹3,450.00₹5,800.00 -
Expansion Testing Interface Board for Microcontrollers
Features:
Input Output Board for Arduino 8051 AVR Raspberry Pi
8 LEDs and 4 Switches
5V Relay, Buzzer for Output test
TSOP, LDR and LM35D Temperature Sensor for Input Testing
Potentiometer for Varying Sensitivity.₹115.00 -
USB 2.0 Cable Type A/B for Arduino UNO
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
₹18.00 -
Raspberry Pi 4 Model B – 8GB RAM
Raspberry Pi 4 8GB with the 8GB RAM capacity provides a huge scope for various multi-tasking activities, running powerful data servers, projects, virtual machines etc. This mini-computer is a better alternative since it is both energy efficient and cost effective. It is a silent machine and uses less energy than any other computer. It provides faster networking as it comes with a Gigabit Ethernet and onboard wireless networking along with better Bluetooth connectivity. It can transfer data 10 times faster with the help of two USB 3.0 ports and two USB 2.0 ports.
₹6,500.00₹9,500.00Raspberry Pi 4 Model B – 8GB RAM
₹6,500.00₹9,500.00 -
Nano V3 with USB Cable Compatible with Arduino
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
₹240.00₹500.00Nano V3 with USB Cable Compatible with Arduino
₹240.00₹500.00 -
Micro USB 2.0 Cable Type A/B for Arduino Nano
- Up to 480 Mbps data transfer rate.
- USB Type: Type-A to Mini-B
- Weight: 15 gm
- Length: 30 cm
- Exclusively designed for Arduino boards.
₹18.00 -
Raspberry Pi 4 Model B – 4GB RAM
Raspberry RPi 4 4GB with the 4GB RAM capacity provides a huge scope for various multi-tasking activities, running powerful data servers, projects, virtual machines etc. This mini-computer is a better alternative since it is both energy efficient and cost effective. It is a silent machine and uses less energy than any other computer. It provides faster networking as it comes with a Gigabit Ethernet and onboard wireless networking along with better Bluetooth connectivity. It can transfer data 10 times faster with the help of two USB 3.0 ports and two USB 2.0 ports.
₹4,900.00₹8,500.00Raspberry Pi 4 Model B – 4GB RAM
₹4,900.00₹8,500.00 -
Uno Rev3 SMD Atmega328P Compatible with Arduino
Features-
- Flash Memory – 32 KB (ATmega32u4) of which 4 KB used by boot loader
- SRAM – 2 KB (ATmega328P)
- EEPROM – 1 KB (ATmega328P)
₹290.00₹550.00Uno Rev3 SMD Atmega328P Compatible with Arduino
₹290.00₹550.00 -
Raspberry Pi 4 Model B 2GB RAM
Raspberry Pi 4 Model 2GB RAM capacity provides a huge scope for various multi-tasking activities, running powerful data servers, projects, virtual machines etc. This mini-computer is a better alternative since it is both energy efficient and cost effective. It is a silent machine and uses less energy than any other computer. It provides faster networking as it comes with a Gigabit Ethernet and onboard wireless networking along with better bluetooth connectivity. It can transfer data 10 times faster with the help of two USB 3.0 ports and two USB 2.0 ports.
₹4,550.00₹4,899.00Raspberry Pi 4 Model B 2GB RAM
₹4,550.00₹4,899.00 -
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3
- UNO Case is to enclose Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
₹55.00 -
White Type C cable – 1m for Arduino Nano V3.0
Features:
- Allows you to connect Arduino NanoV3.0 with USB port to the computer.
- Good data transfer rate.
₹37.62 -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Tools & Equipments
- Bulk/Wholesale
