- “5V WiFi Relay Module v1.0 for ESP8266 ESP01S- IOT Smart Home Remote Control Switch” already exists in your wishlist
 
- 
	
4 Channel 5V Relay Module
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
 - Equipped with high-current relay, AC250V 10A; DC30V 10A.
 - Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
 - Indication LED’s for Relay output status.
 
₹105.00 (Price is Exclusive of GST)4 Channel 5V Relay Module
₹105.00 (Price is Exclusive of GST) - 
	
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
 - Trigger Voltage: 5VDC
 - Triode drive, increasing relay coil
 - High impedance controller pin
 - Pull-down circuit for the avoidance of malfunction
 - Power supply indicator and Control indicator lamp
 - Power supply and relay instructions, lit, the disconnect is off;
 - The input signal, signal, common Terminal and start conducting;
 
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) - 
	
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
Features :
- 5V 16-Channel Relay Module with AC contact capacity of 10A 250V and optocoupler protection.
 - Onboard power supply module does not need an external power supply. I / O port driver is active low.
 - The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
 - It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
 - The 1-16 road can be any full on/off or any road.
 - Each relay common terminal “COM” are independent, user-friendly access to different signals, each relay are normally closed and normally open with the port.
 - Each relay is equipped with motion lights.
 - All interfaces can be directly connected through the terminal leads, very convenient.
 
₹546.00 (Price is Exclusive of GST)5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
₹546.00 (Price is Exclusive of GST) - 
	
5V 8 Channel Relay Module
Features:
- The 8550 transistor drive, drive ability.
 - A fixed bolt holes for easy installation.
 - It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
 - Relay control interface by single-chip IO.
 - Low-level suction close, high-level release.
 - Easy to use, simple 3 line structure.
 
₹285.00 (Price is Exclusive of GST)5V 8 Channel Relay Module
₹285.00 (Price is Exclusive of GST) - 
	
5V WiFi Relay Module v1.0 for ESP8266 ESP01S- IOT Smart Home Remote Control Switch
- Operating Voltage: DC 5V
 - Transmission range: the maximum transmission range of 400m (open environment, mobile phone equipped with WIFI module)
 - Load capacity: 10A / 250VAC 10A / 30VDC, the relay pulls 100,000 times
 - Designed for smart home, internet of thing and other DIY project.
 
₹230.00 (Price is Exclusive of GST)5V WiFi Relay Module v1.0 for ESP8266 ESP01S- IOT Smart Home Remote Control Switch
₹230.00 (Price is Exclusive of GST) - 
	
Buzzer Module Board-3.3 to 5V
- Operating voltage: 3.3V-5V
 - PCB Dimension: 3.1cm*1.3cm.
 - Color: Blue
 - Easy to use
 
₹30.00 (Price is Exclusive of GST)Buzzer Module Board-3.3 to 5V
₹30.00 (Price is Exclusive of GST) - 
	
DS1302 Real Time Clock Module (RTC)
Features:-
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100
 - Serial I/O for Minimum Pin Count
 - 2.0V to 5.5V Full Operation
 - Uses Less than 300nA at 2.0V
 - Single-Byte or Multiple-Byte (Burst Mode) Data Transfer for Read or Write of Clock or RAM Data
 
₹52.00 (Price is Exclusive of GST)DS1302 Real Time Clock Module (RTC)
₹52.00 (Price is Exclusive of GST) - 
	
Dual Channel Digital Power Board XH-M543, DC12-26V 2x120W DIY Module High Power Stereo Amp Board for Car Vehicle Computer Speaker DIY Home Theater Audio System
- Strong TPA3116D2 chip is a digital power amplifier chip, with low idle loss characteristics,makes it work well and quickly.
 - On board front-facing IC to improve the input sensitivity, high-definition sound quality
 - This product has the characteristics of loud sound ,the capacitance are large, ,excellent sound quality.
 - There is no solder joint on the back of the circuit board,the chip capacitors and the solder solder board together, so there is no possibility of short circuit.
 
₹665.00 (Price is Exclusive of GST) - 
	₹230.00 (Price is Exclusive of GST)
Dual Channel Stereo Mini Class D Digital Audio Power Amplifier Board (PAM8610 2 x 10W with Volume)
₹230.00 (Price is Exclusive of GST) - 
	
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
 - 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
 - Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
 - Power: 15W+15W
 - Impedance: 4-8 ohms
 
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) - 
	
Dual-axis XY Joystick Module
- Input voltage range: DC 3.3V to 5V, Quality rocker, long life, stable performance
 - Two analog outputs, one digital output
 - X, y-axis output of the two potentiometers can be read out through the a to d converter
 - Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change. This module uses 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the arrow direction, the read voltage value increases with the maximum to 5V; arrows in the opposite direction to press, read the voltage decreases , The minimum is 0V.
 - Package content: 1 joystick module
 
₹28.00 (Price is Exclusive of GST)Dual-axis XY Joystick Module
₹28.00 (Price is Exclusive of GST) - 
	
Laser sensor Module 650nm 6mm 5V 5mW Red Laser
- Voltage: 3.0 V – 5 V.
 - Driver: APC circuit.
 - Line length: about 135 mm.
 - Transmit power: 58mW.
 - Operating Current: 40mA.
 - Operating Current: 40mA.
 - Operating temperature: -36◦C ~ 65◦C.
 
₹39.00 (Price is Exclusive of GST)Laser sensor Module 650nm 6mm 5V 5mW Red Laser
₹39.00 (Price is Exclusive of GST) 


			        










