Electronic Modules & Displays
- “2.4″ Inch Touch Screen TFT Display Shield” already exists in your wishlist
-
4×4 Keypad
- Ultra-thin design & adhesive backing provides easy integration to any project.
- Excellent price-performance ratio.
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
₹60.00 (Price is Exclusive of GST)4×4 Keypad
₹60.00 (Price is Exclusive of GST) -
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
Features :
- 5V 16-Channel Relay Module with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- Each relay common terminal “COM” are independent, user-friendly access to different signals, each relay are normally closed and normally open with the port.
- Each relay is equipped with motion lights.
- All interfaces can be directly connected through the terminal leads, very convenient.
₹546.00 (Price is Exclusive of GST)5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
₹546.00 (Price is Exclusive of GST) -
5V 8 Channel Relay Module
Features:
- The 8550 transistor drive, drive ability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
₹285.00 (Price is Exclusive of GST)5V 8 Channel Relay Module
₹285.00 (Price is Exclusive of GST) -
5V WiFi Relay Module v1.0 for ESP8266 ESP01S- IOT Smart Home Remote Control Switch
- Operating Voltage: DC 5V
- Transmission range: the maximum transmission range of 400m (open environment, mobile phone equipped with WIFI module)
- Load capacity: 10A / 250VAC 10A / 30VDC, the relay pulls 100,000 times
- Designed for smart home, internet of thing and other DIY project.
₹230.00 (Price is Exclusive of GST)5V WiFi Relay Module v1.0 for ESP8266 ESP01S- IOT Smart Home Remote Control Switch
₹230.00 (Price is Exclusive of GST) -
₹18.00 (Price is Exclusive of GST)7 Segment LED Display
₹18.00 (Price is Exclusive of GST) -
₹50.00 (Price is Exclusive of GST)8 Channel Bi-Directional Logic Level Converter Module
₹50.00 (Price is Exclusive of GST) -
8X8 Mini Dot Matrix LED Display
- Easy to Install on Breadboard
- Bright LED lights
- Compact Design.
- LED Size: 3mm
- Configuration: Common Cathode
₹45.00 (Price is Exclusive of GST)8X8 Mini Dot Matrix LED Display
₹45.00 (Price is Exclusive of GST) -
A4988 driver Stepper Motor Driver
Features :
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
₹51.10 (Price is Exclusive of GST)A4988 driver Stepper Motor Driver
₹51.10 (Price is Exclusive of GST) -
A4988 Stepper Motor Driver Controller Board- RED
Controller Board
- Compact size, easy to install and use.
- All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
- Jm connection motor: Jv Connects 5V and 12V-24V Power Supply.
- E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
₹49.00 (Price is Exclusive of GST)A4988 Stepper Motor Driver Controller Board- RED
₹49.00 (Price is Exclusive of GST) -
BASIC NX3224T028 2.8″HMI LCD Touch Display
Features:
- 320 x 240 Resolution
- RGB 65K true to life colours
- TFT screen with integrated resistive touch panel
- 4 pin TTL serial interface
- 4M Flash memory for User Application Code and Data
- Onboard micro-SD card slot for firmware upgradation
- Visual Area: 57.6mm(L)×43.2mm(W)
- Adjustable Brightness: 0~180 nit, the interval of adjustment is 1%
- 5V65mA power consumption
- Compatible with Raspberry Pi A+, B+, Pi 2, Pi 3, Arduino.
- Certificates: CE/EMC, RoHS (certificates)
Software:
₹2,450.00 (Price is Exclusive of GST)BASIC NX3224T028 2.8″HMI LCD Touch Display
₹2,450.00 (Price is Exclusive of GST) -
BTS7960 Stepper Motor Driver Module 43A H-Bridge High-Power
Features :
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
- Overtemperature shut down with latch behavior.
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- 74AHC244 Schmitt-trigger Octal buffer/line driver for ESD protection (Inputs accepts voltages higher than VCC).
Input port:
- RPWM: forward level or PWM signal input, active high.
- LPWM: Reverse level or PWM signal input, active high.
- R_EN: forward drive enable input, high-level enable, low level off.
- L_EN: Reverse drive enable input, high-level enable, low level off.
- R_IS: forward drive current alarm output.
- L_IS: Reverse drive current alarm output.
- VCC: +5 V power output, 5V power supply connection with the microcontroller.
- GND: signal common low end.
₹215.00 (Price is Exclusive of GST)BTS7960 Stepper Motor Driver Module 43A H-Bridge High-Power
₹215.00 (Price is Exclusive of GST) -
Buzzer Module Board-3.3 to 5V
- Operating voltage: 3.3V-5V
- PCB Dimension: 3.1cm*1.3cm.
- Color: Blue
- Easy to use
₹30.00 (Price is Exclusive of GST)Buzzer Module Board-3.3 to 5V
₹30.00 (Price is Exclusive of GST)
