-
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
Features :
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
₹144.00 (excl. GST)100A Multirotor ESC Power Distribution Battery Board For Quadcopter
₹144.00 (excl. GST) -
MT8870 DTMF Audio/Speech Decoding Telephone Module
Features:
- Onboard voice input interface
- Low power consumption
- Internal gain setting amplifier
- Onboard LED, it is very convenient to check the output state.
- Adjustable guard time
- Central office quality
- Onboard 3.5mm input interface
- 5 Channel interface
- On-board MT8870 frequency decoder chip
- Power-down mode
- Inhibit mode
- Onboard audio input interface
- Onboard LED lights for output state indication Complete DTMF Receiver.
- Does not require external circuits or wiring, it can be inserted directly into the UNO/MEGA2560/DUE board to use.
- 12-Digital outputs decode mobile and fixed telephone keys (0-9, * #). Also, another 4 Digital output(ABCD) can use “DTMF Dial” for Software control.
₹147.00 (excl. GST)MT8870 DTMF Audio/Speech Decoding Telephone Module
₹147.00 (excl. GST) -
White Reed Switch Y213 2*14mm Normal Open
Features :
- Small Module.
- Very easy to use.
- Direct connection in the circuit.
₹16.79 (excl. GST)White Reed Switch Y213 2*14mm Normal Open
₹16.79 (excl. GST) -
OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
Features :
- Switching capacity of 3A at 250VAC, 5A at 125VAC, 0.1A at 30VDC.
- Pin plunger, hinge, long hinge, simulated roller, hinge roller lever actuators available.
- Solder, quick connect, PCB terminals available.
- SPDT, SPST-NC, SPST-NO contact configuration.
- Two split springs ensure high stability and durability.
- Economical, subminiature snap action switch offers long service life (30 million operations minimum)
- All models are free from overtravel restrictions, permit easy setting
- Wide switching capacity range from micro voltage/current loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250VAC)
- Standard operating force, low force or super-low force models available
- RoHS Compliant
₹64.00 (excl. GST)OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
₹64.00 (excl. GST) -
Turbidity Sensor with Module
Features :
- Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
- Measures turbidity of water in rivers.
- Detects and verifies water quality.
- Digital and analog output;
- Able to detect particles that are suspended in water.
- Trimpot for sensitivity adjustment.
- Ideal monitoring of water turbidity in rivers, streams, lakes, water boxes, catchment and research sites, laboratories, tanks with liquids and etc.
- Comes with a module and jumpers
₹730.00 (excl. GST)Turbidity Sensor with Module
₹730.00 (excl. GST) -
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Wheatstone bridge formation of Load Cell:
HX711 (24 bit Analog to Digital Converter)
HX 711 is a precision 24-bit analog to digital converter (ADC) specially designed for Weigh scales and industrial control applications to interface directly with a bridge sensor.
Simply connect Load cell wires to the HX711 module based on their color, then connect DAT (Data) pin to Arduino Analog pin A1 and connect CLK (Clock) pin to Arduin0 Analog pin A0, Put Vcc and GND supply from Arduino power source pins.
₹222.00 (excl. GST)Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
₹222.00 (excl. GST) -
OV7670 640×480 VGA CMOS Camera Image Sensor Module
Specifications and Features:
- MODEL: OV7670 640X480 VGA CMOS CAMERA
- Pixel Coverage: 3.6um x 3.6um;
- Duck Current: 12 mV/s at 6’C
- Support VGA, CIF and from CIF to 40 x 30 format;
- Vario Pixel method for sub-sampling; Auto Image Control: AEC, AGC, AWB, ABF, ABLC;
- Image Quality Control: Color saturation, hue, gamma, sharpness, and anti-blooming;
- ISP includes noise reduction and defect correction; Support image scaling; Lens shading correction;
- Flicker 50/60Hz auto-detection;
- Color saturation level auto adjust;
- Edge enhancement level auto adjust;
- De-noise level auto adjust
- High sensitivity for low light applications
- Low voltage suitable for embedded applications
- Standard sccb interface, compatible with i2c interface
₹108.00 (excl. GST)OV7670 640×480 VGA CMOS Camera Image Sensor Module
₹108.00 (excl. GST) -
₹958.00 (excl. GST)SeeedStudio Seeeduino Xiao SAMD21 (Pre-Soldered)
₹958.00 (excl. GST) -
1N5819 1W Diode (Pack of 30)
- Maximum Repetitive Peak Reverse Voltage (VRRM): 40V.
- Maximum RMS voltage (VRMS): 28V.
- Maximum Average Forward Rectified Current(IF(AV)): 1A.
₹94.00 (excl. GST)1N5819 1W Diode (Pack of 30)
₹94.00 (excl. GST) -
₹522.00 (excl. GST)280PCS 1W Zener Regulator Diode Kit
₹522.00 (excl. GST) -
DC Power Jack-Female Connector with 2 pin Screw Terminal – Pack of 2
- Connector Type: DC 5.5/2.1mm
- Connector type DC mains
- Electrical mounting screw terminal
- Length of metal part 12mm
- Spatial orientation straight
₹47.00 (excl. GST)DC Power Jack-Female Connector with 2 pin Screw Terminal – Pack of 2
₹47.00 (excl. GST) -
Ender-3+ PLA White
- Easy and Quick Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrusion; V-Shape with POM wheels makes it move noiseless, smoothly, and durable.
- Safety Protected Power Supply: Only needs 5 minutes for the hotbed to reach 110℃.
- It is a great project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics.
Modeling Technology : FDM（Fused Deposition Modeling） Printing Size : 220x220x250mm Printing Speed : 180mm/s Filament : 1.75mm PLA, TPU, ABS Working Mode : Online or SD offline Filament : White ₹15,460.00 (excl. GST)Ender-3+ PLA White
₹15,460.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
