-
IRF540N (TO-220-3) MOSFET (Pack Of 2 ICs)
IRF540N (TO-220-3) MOSFETÂ
- Drain to source voltage Vds is 100V
- Gate to source voltage is ±20V
- On Resistance Rds(on) of 44mohm at Vgs of 10V
- Power dissipation Pd of 130W at 25°C
₹40.00 -
220 Ohm 0.25W Metal Film Resistor (Pack of 100)
220 Ohm 0.25W Metal Film Resistor
Resistance (Ω): 220
Tolerance (%): 1
 Maximum Working Voltage (V): 250
 Maximum Overload Voltage (V): 500
 Temperature Co-efficient: ±50 ppm/°C
Operating Temperature (°C): –40 to 150
Mounting Type: Through Hole
Â
₹40.00 -
Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – 5Pcs
Tensioner Torsion Spring
5 x Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer
₹40.00 -
23Teeth Straight Bevel Plastic Gear ID 10mm Round
Applications of bevel gears are as follows:
- They are used in differential drives, which can transmit power to two axles spinning at different speeds, as as those on a cornering automobile
- Bevel gears are used as the main mechanism for hand drills. The bevel gears have added an advantage of increasing the speed of rotation of the chuck and this makes it possible to drill a range of materials.
- Standard bevel gears are mainly used in low speed applications.
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹40.00 -
23Teeth Straight Bevel Plastic Gear ID 8mm Round
Applications of bevel gears are as follows:
- They are used in differential drives, which can transmit power to two axles spinning at different speeds, as as those on a cornering automobile
- Bevel gears are used as the main mechanism for hand drills. The bevel gears have added an advantage of increasing the speed of rotation of the chuck and this makes it possible to drill a range of materials.
- Standard bevel gears are mainly used in low speed applications.
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹40.00 -
BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Operating Pressure: 300 hPa to 1100 hPa
- Peak current: 1.12mA
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹40.00 -
0.1MM Copper Soldering Solder PPA Enamelled Repair Reel Wire
Specifications and Features:
- Wire Diameter: 0.1 mm.
- Length: about 15m
- Color: Copper
- Flux Content:about 15m
- Material: Copper / Copper Alloy
- Spool Size: 3.1cm x 3.1cm x 1.9cm.
- 100% Brand new and high quality!
- 1 roll of 0.1 mm Enamelled wire.
- It can be used to connect Fly line(Jump wire) for computer and mobile phone motherboard repair.
- No need to remove the lacquer, welding directly.
₹38.00₹44.00 -
XT90 Female Connector with Housing (1pcs)
Features:
- Plug Type: 5mm gold bullet connector in nylon shroud
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹38.00 -
23 Teeth Straight Bevel Plastic Gear ID 6mm Round
Applications of bevel gears are as follows:
- They are used in differential drives, which can transmit power to two axles spinning at different speeds, as as those on a cornering automobile
- Bevel gears are used as the main mechanism for hand drills. The bevel gears have added an advantage of increasing the speed of rotation of the chuck and this makes it possible to drill a range of materials.
- Standard bevel gears are mainly used in low speed applications.
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹36.00 -
XT90 Male Connector with Housing (1pc)
Specifications and Features:
- Metal connector size: 4.5mm
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹36.00 -
74HC151 8-Input Multiplexer IC (74151 IC) DIP-16 Package
  74HC151 8-Input Multiplexer IC
- C Name: 74HC151
- Package/Case: DIP-16
₹32.00 -
M274 360 Degree Rotary Encoder Brick Sensor Module
M274 360 Degree Rotary Encoder
- Model : KY-040.
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
- Weight : 10 gm.
₹32.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Tools & Equipments
- Bulk/Wholesale
