2mm x 3mm PTFE Teflon Tube
2mm * 3mm PTFE Teflon Tube has 2mm inner diameter and 3mm outer diameter. PTFE Tube to is used to get the best printing performance out of your 3D Printer. It increases print quality, reduces filament jams, and improves retraction.
₹52.00₹65.00(Price is Exclusive of GST)2mm x 3mm PTFE Teflon Tube
₹52.00₹65.00(Price is Exclusive of GST)
2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit
2 x Gear Motor
4 x “T” mode Fixed Motor Bracket
16 x M3X10mm Screw
8 x M3 Nut
4 x M3X12+6mm Copper Cylinder
4 x M3X30mm two-way Copper Colum₹400.00 (Price is Exclusive of GST)2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit
₹400.00 (Price is Exclusive of GST)3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
This heat sinks haves short profiles that are enough to fit within standard raspberry pi cases. Includes one large and two small heat sinks.Easy to apply heatsinks for a raspberry pi board.
₹11.00 (Price is Exclusive of GST)3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
₹11.00 (Price is Exclusive of GST)3 in 1 Soil Tester Meter for Garden Lawn Plant Pot for Moisture, Light Meter, PH Sensor Tool Three-in-one Round Soil Tester
- 3 in 1 Soil Tester Meter
- Easy to use: no battery needed, plug and read.
- Scientifically accurate: keep your plants in a healthy range.
- Simply insert the probes into the soil, and you’ll get your reading.
₹450.00 (Price is Exclusive of GST)3 in 1 Soil Tester Meter for Garden Lawn Plant Pot for Moisture, Light Meter, PH Sensor Tool Three-in-one Round Soil Tester
₹450.00 (Price is Exclusive of GST)3 Series 40A 18650 11.1V 12.6V Lithium Battery Protection Board with Balance for Drill Motor Lipo Cell Module
- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
₹130.00 (Price is Exclusive of GST)3 Series 40A 18650 11.1V 12.6V Lithium Battery Protection Board with Balance for Drill Motor Lipo Cell Module
₹130.00 (Price is Exclusive of GST)3.3k Ohm 1/4W 0603 Surface Mount Chip Resistor
- Resistance: 3.3kΩ.
- Tolerance: 1%.
- Dielectric Withstanding Voltage: 150V.
- Surface-mount chip resistor.
₹0.49 (Price is Exclusive of GST)3.3k Ohm 1/4W 0603 Surface Mount Chip Resistor
₹0.49 (Price is Exclusive of GST)3*6*2.5 mm SMD Tactile Switch (Pack of 20)
3*6*2.5 mm SMD Tactile Switch
- Used in the fields of electronic products, household appliances and more.
- This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
- High precision mechanism design offers acute operation and long service life.
- Compact and lightweight, easy to carry and dismantling.
- Good electrical Conductivity.
₹66.00 (Price is Exclusive of GST)3*6*2.5 mm SMD Tactile Switch (Pack of 20)
₹66.00 (Price is Exclusive of GST)30A Intelligent LCD Solar Controller
Features:
- Built-In Industrial Micro Controller
- Big LCD Display
- Full 4 Stage PWM Charge Management
- Dual MOSFET Reverse Current Protection
- Low Heat Production
₹376.00 (Price is Exclusive of GST)30A Intelligent LCD Solar Controller
₹376.00 (Price is Exclusive of GST)30Pin CH9102X ESP32 Module Wifi+Bluetooth Development Board
- Supply Voltage: 5V
- GPIO Pins: 30
- Connectivity: Bluetooth+WiFi
- Flash Memory: 4MB (32Mbits)
- WiFi frequency: 2.4GHz
- USB Type-C connector
₹295.00 (Price is Exclusive of GST)30Pin CH9102X ESP32 Module Wifi+Bluetooth Development Board
₹295.00 (Price is Exclusive of GST)3PI miniQ Car wheel Tyre 44mm N20 DC Gear Motor Wheel
- Wheel Outer Diameter: 44MM
- Wheel width: 18 mm
- Tire material: Rubber
- Color: Black & White
- Weight: 18 gm
- Coder Accuracy: 12 pulses per revolution
- Wheel weight: 19.4 gm.
₹38.00 (Price is Exclusive of GST)3PI miniQ Car wheel Tyre 44mm N20 DC Gear Motor Wheel
₹38.00 (Price is Exclusive of GST)3S 100A 12.6V Li-ion Lithium 18650 Battery BMS PCM Protection Board with Balance
- Charging voltage: 12.6V-13V
- Size: 70*60*8.5mm
- Over-discharge voltage range: 2.5±0.05v
- Upper limit working current: 100A (pay attention to heat dissipation)
- Working temperature: -40~+50°C
- Effective life: more than 30,000 hours
₹830.00 (Price is Exclusive of GST)3S 100A 12.6V Li-ion Lithium 18650 Battery BMS PCM Protection Board with Balance
₹830.00 (Price is Exclusive of GST)4×4 Matrix 16 Keyboard Keypad
4×4 Matrix 16 Keyboard Keypad
- Easy communication with any microcontroller.
- Tactile type switches.
- Over 1,000,000 operations per key.
- Contact rated for 12V dc @ 20mA.
- Over 1,000,000 operations per key.
₹125.00 (Price is Exclusive of GST)4×4 Matrix 16 Keyboard Keypad
₹125.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
