-
GT2 Aluminium Timing Pulley 60 teeth 5mm Bore
GT2 toothed pulley with 2mm pitch teeth, suitable for use with GT2 neoprene reinforced nylon or steel reinforced polyurethane belts to be chosen depending on the type of end use. Made entirely of aluminium.
Such a pulley reduces backwash due to accelerations and directional changes, ensuring good resolution when used on automatic system such as 3D printer and small CNC systems.
Features:
- High Quality Aluminium
- Excellently Machined
- Durable and practical
- Minimizes the chance of the belt slipping
- Easy to use
₹205.00 -
GT2 Close-Loop Rubber Timing Belt for 3D Printer
Features:
- Type: Closed Loop
- Length: 158 mm
- Width: 6mm
- Good quality and durable low noise
₹75.00 -
GT2 Open Loop Timing Belt 6mm Width for 3D Printer-5 Meter
 GT2 Open Loop Timing Belt
  Features:
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effectPositive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
₹485.00 -
GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profiles.
 Features:
- Adopting high-quality Aluminum Alloy material,sturdy and durable
- Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively
₹216.00 -
Hi-Link Switch Power Supply Module (HLK PM01 5V/3W)
Hi-Link Switch Power Supply Module
Environmental conditions:
- Technical indicators: Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude: 2000M or less.
₹161.00 -
Hooter Security Alarm for Bank Loud Sound – 220v -110 DB
- Sound level:110 dB 100-300 Meter Distance
- Product: Electronic Siren; Frequency:800Hz to 1200 Hz
- 6 Months warranty against manufacturing defects
- Easy installation
₹550.00 -
Human Induction Fan Model Kit
The body sensing fan, in short, automatically turns on the fan when the body sensing module senses someone. When a person leaves the human body sensing module, the fan will automatically turn off, which is very intelligent.
₹500.00Human Induction Fan Model Kit
₹500.00 -
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
HX711
Specifications and Features :
- Recommended excitation voltage: 5-10V.
- Two selectable differential input channels.
- On-chip active low noise PGA with a selectable gain of 32, 64 and 128.
- On-chip power supply regulator for load-cell and ADC analogue power supply.
- Selectable 10SPS or 80SPS output data rate.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Simple digital control and serial interface: pin-driven controls, no programming needed.
- Simultaneous 50 and 60Hz supply rejection.
₹31.00 -
Infrared TSOP Obstacle Avoidance Sensor Module
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
₹100.00 -
IoT & AI Kit
- Main Controller Board: 1
- LED Matrix Module: 2
- Servo Motor: 6
- DC Motor: 4
- Push Button Switch Module: 2
- Temperature Sensor: 1
- Microcontroller Board: 1
- Vibration Sensor: 1
- Potentiometer Module: 2
- Ultrasonic Sensor: 1
- Water Level Sensor: 1
- Sound Sensor: 1
- Limit Switch Module: 2
- Soil Moisture Sensor: 1
- Buzzer Module: 1
- Colour Sensor: 1
- TFT Display (On Board): 1
- Push to Lock Switch Module: 2
- Radar (Motion) Sensor: 1
- Stepper Motor: 2
- Light Sensor: 1
- Magnetic Sensor: 1
- Moisture Sensor: 1
- Seven Segment Display: 1
- IR Sensor: 2
- Fan Module: 1
- LED Module: 2
- Servo Motor: 6
₹17,796.00IoT & AI Kit
₹17,796.00 -
IRF1404 MOSFET – 40V 202A N-Channel HEXFET Power MOSFET
IRF1404 MOSFET
Number of Channels: 1 Channel
Transistor Polarity: N-Channel
Drain-Source Breakdown Voltage (Vds): 40V
Continuous Drain Current (Id): 202A
Drain-Source Resistance (Rds On): 4mOhms
₹87.00 -
IRF540N (TO-220-3) MOSFET (Pack Of 2 ICs)
IRF540N (TO-220-3) MOSFETÂ
- Drain to source voltage Vds is 100V
- Gate to source voltage is ±20V
- On Resistance Rds(on) of 44mohm at Vgs of 10V
- Power dissipation Pd of 130W at 25°C
₹40.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools & Equipment’s
- Bulk/Wholesale