-
0.28inch 0-100V Three Wire DC Mini Voltmeter Display Green
- Don’t compromise best price and high quality
- Package Includes :- 1pcs voltmeter
- Operating Voltage: 0-100 VDC
- this voltmeter will automatically move the decimal point’s position according to the different measuring voltage
- It is a 3-wire display.
₹80.00 -
1-8S Lipo Battery Voltage Tester
Features :
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- It has a mode button at the top for setting the desired voltage value.
₹154.001-8S Lipo Battery Voltage Tester
₹154.00 -
11.1V 2200mAh Lipo Lithium Polymer Rechargeable Battery
- Lithium-Polymer (Li-Po) Battery For RC, Planes and Drones
- 3 Cell (3S) 11.1V 2200MAH 35C
- Very Small in size and weight
- Connector Plug: XT60 Plug connector
- Discharge Current: 35*2200maH = 77Amp
₹1,500.00 -
11.1V 5400mAH LiPo Battery
- This is a 11.1V LiPo battery pack with a capacity of 5400mAh.
- It produces a maximum charging rate of 5C and maximum discharging rate of 40C.
- Experts recommend to maintain a charging rate of 1-3C for the5400mAh LiPo battery.
- Suitable for most RC models such as remote control racing drone, helicopter, car, boat, etc.
- Compatible with balance charger. Package Included : 1 x 5400mah lipo Battery
₹4,000.0011.1V 5400mAH LiPo Battery
₹4,000.00 -
12V 2A DC Power Adapter
- Universal
- Power Consumption: 60 W
- Power Cord Included
₹150.0012V 2A DC Power Adapter
₹150.00 -
170 Points Mini Bread Board
- 170 Tie-points for Arduino Raspberry Pi
- Colour May Vary
- Great addition to your hobby craft tool kit
- Perfect product for your saftey and lab supply
- ABS Plastic material
₹15.00₹25.00170 Points Mini Bread Board
₹15.00₹25.00 -
170 Tie Point Mini Self-Adhesive Solderless Breadboard (Pack of 2)
Features :
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Adhesive-backed for permanent mounting.
- Color:Â Green, Yellow, Black.
₹57.00 -
18650 Battery Holder Case DIY Lithium Battery Box Battery Holder with Pin for 4 * 18650
- Size: As shown in images, suitable for 18650 lithium ion battery, Four Cell holder
- Color: Black; 1pcs 18650 Battery Holder Case Leads 3.7V Clip Type for Soldering / Connecting
- Material Type: Metal and plastic
- The package does not include battery of any type, only the cover.
₹72.00 -
18650 Battery Holder/Development Board Compatible With Raspberry Pi3B/3B+
Features:
- I2C Battery Monitoring
- Built-in Li-ion Battery Charging
- Can Supply up to 6A Output Current
- Supports Charging Current of 1A
₹160.00₹299.00 -
18650 Li-Ion Rechargeable Battery – 3.7V 3000mAH
Features:
1. High quality and durable
2. Provide excellent continuous power sources to your device
3. High energy density, large capacity and long life battery
4. No memory effect, recharge up to many times
5. Rechargeable type and professional design, safe and convenient to use₹125.00 -
1S 2A BMS Board 3.7V 18650 Lithium Battery Protection Board
Features:
- Easy to use
- Color: Green
- The internal resistance difference is not more than 5mQ
- BMS Li-ion Battery Protection Board
- The tolerance is less than 30mAh
- Single-cell consumption of battery (self-consumption): ≤3uA
- In this MOSFET are employed to do the monitoring task which protects our battery cells from overcharge
Precautions:1. Before installing the protection board, the battery should be matched well (the voltage difference between each battery should not be 0.05V, the internal resistance difference is not more than 5mQ, the tolerance is less than 30mAh), the smaller the battery voltage difference, the better the protection board will work. .2. The batteries are connected in parallel and then connected in series, and the welding is correct (18650 battery nickel spot welding, other batteries are soldered), do not screw, easy to burn the protection board IC.3. If it is an old battery change board, please pay attention: Please confirm the battery is normal before buying?4. When installing, use a multimeter to check whether the voltage of each string is the same. The performance failures with a difference of more than 1.0V are: running not far, starting and powering off, charging time is short, basically the battery core problem is more. The failure of the protection board is as follows: the battery cannot be charged, and the battery has a voltage and cannot be discharged.₹15.00 -
1S 3.7V 3A 2MOS BMS Li-ion 18650 Battery Protection Board
1S 3.7V 3A 2MOS
Features:
- Small size designed for a four-cell battery pack.
- Simple and convenient circuit for easy connections
- Over-charge/Over-discharge Protection.
- Pre-soldered Nickel Strip ready to mount on battery.
₹26.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Tools & Equipments
- Bulk/Wholesale
