• 606ZZ Bearing 6x17x6 Stainless Steel Shielded Miniature Bearings – 2 Pcs

    606ZZ Bearing 6x17x6

    1. Model: 606ZZ
    2. Inside diameter (ID): 6 mm.
    3. Outside diameter (OD): 17 mm.
    4. Width: 6 mm.
    5. Weight: 5 gm (each)
  • 696ZZ Bearing 6x15x5 Stainless Steel Shielded Miniature Bearings (4Pcs)

    696ZZ Bearing 6x15x5

    1. Model: 696ZZ
    2. Inside diameter (ID): 6 mm.
    3. Outside diameter (OD): 15 mm.
    4. Width: 5 mm.
    5. Weight: 16 gm. (Each has 3 gm).
  • GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt

    GT2 Timing Belt 200mm Width-6mm

    1 x GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt for 3D Printer

  • GT2 Close-Loop Rubber Timing Belt for 3D Printer

    GT2 Close-Loop Rubber Timing Belt

    • Pitch: 2mm
    • Material: Neoprene Rubber With Fiberglass Core
    • Width: 6mm
    • Total Length: 188mm
    • Belt Height: 1.52 mm
    • Tooth Height: 0.76mm
    • Shape: Closed Loop
  • Q250 Quadcopter Super Strong Carbon Fiber 4mm Arm FPV Racing Frame(250mm) Kit

    Q250 Quadcopter

    Features :

    1. Lightweight and Durable.
    2. Made by super strong and advanced engineering material.
    3. The frame has excellent strength.
    4. The arm equips dampers for the safe landing.
    5. The arm has multiple motor mounting holes.
    6. Equips vibration-free mounting bracket for FPV camera.
  • OTG Android 5.8G UVC AV Phone Receiver

    OTG Android

    1. Model: ROTG01
    2. Name: UVC OTG FPV Receiver
    3. Channel: 150CH
    4. Power Supply: 5V(by smartphone)
    5. Connector: SMA Female
  • Telemetry Kit 433Mhz 100MW

    Telemetry Kit

    Features :

    • Very small size & Lightweight (under 4 grams without antenna)
    • Transparent serial link
    • MAVLink protocol framing and status reporting
    • Frequency hopping spread spectrum (FHSS)
    • Adaptive time division multiplexing (TDM)
    • Support for LBT and AFA
    • Configurable duty cycle
    • Interchangeable air and ground modules
    • Micro-USB port
    • 6-position DF13 connector
    • 100 mW maximum output power (adjustable)
    • Based on HopeRF’s HM-TRP module
    • RP-SMA connector
    • 2-way full-duplex communication through adaptive TDM
    • UART interface
    • Transparent serial link
    • MAVLink protocol framing
    • Frequency Hopping Spread Spectrum (FHSS)
    • Configurable duty cycle
    • Error correction corrects up to 25% of bit errors
    • Configurable through Mission Planner and APM Planner
    • Built-in error correcting code (can correct up to 25% data bit errors)
    • The demonstrated range of several kilometers with a small Omni antenna
    • Can be used with a bi-directional amplifier for even more range
    • AT commands for radio configuration
    • RT commands for remote radio configuration
    • Adaptive flow control when used with APM
    • Based on the HopeRF HM-TRP radio module, featuring a SiLabs Si1000 RF microcontroller.
  • DC Geared Motor with Encoder 16 RPM 138N.Cm 12V SPG30E-270K

    DC Geared Motor

    1. Rated Voltage: 12 V
    2. No-load Current: 70 mA
    3. Rated Current: 410 mA
    4. Rated Torque: 14 kg-cm
    5. Shaft Diameter: 6 mm
    6. Gear Ratio: 270:1
  • Motor Gear Package Kit

    Motor Gear Package

    This motor package is a common material for making various small models. Different motors are suitable for different handicrafts and models.
    The motors are all small DC micro motors, and the voltage is between 1-24 v. most motors can be driven by two dry batteries

  • 75pcs. Gears Assorted Kit for DIY Robotics and Household Repair

    These gears are used in laboratories, science education, and DIY models and RC-airplane/helicopter repair, as well as many household repairs like old music system etc. its a great toolkit for promoting DIY abilities, improving children’s, teen’s hands-on skills and divergent thinking.

    • Material: plastic;
    • Colour: white, orange, Blue, yellow
  • ARF Quadcopter Advanced Combo Kit

    Following two motors along with the propellers are included in this combo pack,

    • EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original)

    This ARF Quadcopter EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is motor and propeller combo for use in multi-copters such as tri, quad, hex, and octo, with the ability of transient response and stability. High efficiency with better materials. With prop adapter which is specially made to adjust the rotation of CCW (counter-clockwise) propellers. The ARF Quadcopter EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is easy to install with high quality and durability in use.

    • EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original)

    The EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original) is same as the above motor but used to spin the propellers in the clockwise direction.

    This EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is motor and propeller combo for use in multi-copters such as tri, quad, hex, and octo, with the ability of transient response and stability. High efficiency with better materials.

    With prop adapter which is specially made to adjust the rotation of CW (clockwise) propellers. The EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original) is easy to install with high quality and durability in use.

    Emax BLHeli Series 30A ESC with Oneshot (Original)

    The electronic speed control, or ESC, is what tells the motors how fast to spin at any given time. You need four ESCs for a quadcopter, one connected to each motor. The ESCs are then connected directly to the battery. EMAX BLHELI SERIES 30A ESC  is a brushless dc motor speed controller.

    The low output resistance greatly enhances the power stability, and this will improve the great battery life. The EMAX BLHELI SERIES 30A ESC is programmed to start the brushless dc motor. This ESC has a greater current handling capacity which is 30A continuous and the peak current is 40A for last 10 seconds only.

    Specification and Features :

    1. Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
      1. Materials: glass fiber + polyamide-nylon
      2. Frame Weight: 280g.
      3. Height: 55mm
      4. Colored arms for orientation to keep you flying in the right direction.
      5. Power distribution board included in this item(inbuilt PCB).
      6. Pre-threaded brass sleeves for all frame bolts.
      7. Large mounting tabs on main frame bottom plate for easy camera mounting.
    2. EMAX MT2213 935KV BLDC Motor CCW With Prop1045 Combo (Original)

      1. Brand Name: Emax
      2. Item Name: Emax MT2213 935KV brushless motor
      3. KV: 920 KV
      4. ESC: 18A
      5. Thrust: 860G
      6. Propeller: 8″-10″
      7. Diameter: 28 mm
      8. Length: 39.5 mm
      9. Weight: 53 gm
    3. EMAX MT2213 935KV BLDC Motor CW With Prop1045 Combo (Original)

      1. Brand Name: Emax
      2. Item Name: Emax MT2213 935KV brushless motor
      3. KV: 920 KV
      4. ESC: 18A
      5. Thrust: 860G
      6. Propeller: 8″-10″
      7. Diameter: 28 mm
      8. Length: 39.5 mm
      9. Weight: 53 gm
    4. Emax BLHeli Series 30A ESC with Oneshot (Original)

      1. Constant Current : 30A
      2. Burst Current: 40A for 10 sec.
      3. Battery required : 2-4 S (Orange battery)
      4. BEC Voltage : 5V / 2A
      5. Size : 52 x 26 x 7 mm.
      6. Weight: 28 gm
    5. Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller

      1. Processor
        1. 32bit STM32F427 Cortex M4 core with FPU.
        2. 168 MHz.
        3. 128 KB RAM.
        4. 2 MB Flash.
        5. 32-bit STM32F103 failsafe co-processor.
      2. Sensors
        1. ST Micro L3GD20H 16 bit gyroscope.
        2. ST Micro X4HBA 303H 14 bit accelerometer/magnetometer.
        3. Invensense MPU 6000 3-axis accelerometer/gyroscope.
        4. MEAS MS5607 barometer.
      3. Interfaces
        1. 5x UART (serial ports), one high-power capable, 2x with HW flow control.
        2. 2x CAN (one with an internal 3.3V transceiver, one on expansion connector).
        3. Spektrum DSM / DSM2 / DSM-X® Satellite compatible input.
        4. Futaba S.BUS® compatible input and output.
        5. PPM sum signal input.
        6. RSSI (PWM or voltage) input.
    6. Ublox NEO-M8N High Precision GPS Built-in Compass for APM, AMP2.6, APM 2.8 and Pixhawk 2.4.6, Pixhawk 2.4.8

      1. Navigation update rate up to 10 Hz
      2. Rechargeable 3V lithium backup battery
      3. Low noise 3.3V regulator
      4. Power and fix indicator LEDs
      5. Receiver type 72-channel u-box M8 engine
      6. GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
      7. SBAS L1 C/A: WAAS, EGNOS, MSAS
      8. Galileo-ready E1B/C (NEO-M8N)
      9. Nav. update rate1 Single GNSS: up to 18 HZ
      10. Concurrent GNSS: up to 10 Hz
      11. Position accuracy2 2.0 m CEP
      12. Acquisition2 Cold start: 26 s
      13. Aided starts: 2 s
      14. Reacquisition: 1.5 s
    7. UNIVERSAL GPS FOLDING ANTENNA BASE SET/BLACK

      1. Material: CNC Aluminum alloy, carbon glass fiber rod
      2. Mounting rod diameter: 4mm
      3. length of rod: 14 cm.
      4. GPS plate diameter: 40 mm.
      5. Base plate diameter: 35 mm
      6. Mounting hole spacing: 16-35mm
      7. Weight: 20g
    8. Flysky FS-i6X 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver

      1. Channel : 6-10 (Default 6)
      2. Model Type : Fixed-Wing/Glider/Helicopter
      3. RF Range : 2.408-2.475GHz
      4. RF Power : < 20dBm
      5. RF Channel : 135
      6. Bandwidth : 500KHz
      7. 2.4GHz System : AFHDS 2A / AFDHS
      8. Modulation Type : GFSK
      9. Stick Resolution : 4096
      10. Low Voltage Warning : < 4.2V
      11. DSC port : PS/2 Port PPM
      12. Chargeable : No
      13. Antenna Length : 26mm (Dual Antenna)
      14. Weight : 392g
      15. Power : 6V DC 1.5A
    9. Orange 5200mAh 3S 40C/80C Lithium polymer battery Pack (LiPo)
      1. Model No: Orange 5200mAh 40C 3S1P
      2. Capacity : 5200mAh
      3. Weight : 360.0g
      4. Voltage : 11.1V
      5. Dimensions : 28x44x137(mm )
      6. Max Continuous Discharge : 40C(208.0A)
      7. Balance Plug : JST-XH
      8. Max Burst Discharge : 80C(416.0A)
      9. Discharge Plug : XT-60
      10. Charge Rate : 1-3C Recommended, 5C Max
    10. Lipo Voltage Checker 1-8S
      1. Input: 1-8S
      2. Battery type: Lipo/LiFe/Li-ion
      3. Cell Voltage Display Range: 0.5v-4.5v
      4. Total Voltage Display Range: 3.7-36v
      5. Alarm set values: Off or 2.7-3.8v
    11. XT60 Male w/ 14AWG Silicon Wire 10cm (1pcs/bag)
      1. Connector Type: XT60 Male
      2. Material of Connector: High-Temp nylon
      3. Length: 10 cm.
      4. High-Quality Connector
      5. Designed for heavy duty
      6. High Power Application
    12. SafeConnect Flat 15CM 22AWG Servo Lead Extension (Futaba) Cable
      1. High-Quality cable
      2. One male and one female connector.
      3. Flat 15 cm Servo Lead Extention (Futaba)
      4. Quality wire and connectors used.
      5. Great for larger planes with servos that experience high loads.
  • N20-3V-100 RPM Micro Metal Gear-box DC Motor

    Features :

    1. This is a DC Mini Metal Gear Motor, ideal for making robots
    2. Lightweight, high torque and low RPM.
    3. Fine craftsmanship, durable, not easy to wear.
    4. With excellent stall characteristics, can climb hills easily.
    5. You can also easily mount a wheel on the motor’s output shaft.

Main Menu