-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
-
Raspberry Pi 4 Model B – 8GB RAM
Raspberry Pi 4 8GB with the 8GB RAM capacity provides a huge scope for various multi-tasking activities, running powerful data servers, projects, virtual machines etc. This mini-computer is a better alternative since it is both energy efficient and cost effective. It is a silent machine and uses less energy than any other computer. It provides faster networking as it comes with a Gigabit Ethernet and onboard wireless networking along with better Bluetooth connectivity. It can transfer data 10 times faster with the help of two USB 3.0 ports and two USB 2.0 ports.
₹6,500.00₹9,500.00(Price is Exclusive of GST)Raspberry Pi 4 Model B – 8GB RAM
₹6,500.00₹9,500.00(Price is Exclusive of GST) -
Raspberry PI PICO H (with Soldered Headers)
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
₹395.00 (Price is Exclusive of GST)Raspberry PI PICO H (with Soldered Headers)
₹395.00 (Price is Exclusive of GST) -
Bonka 7.4V 2500mAh 3C 2S (TX) Lithium Polymer Battery Pack
- Voltage(V): 7.4
- Configuration: 2S
- Capacity (mAh): 2500
- Discharge Rate: 3C
₹1,046.00 (Price is Exclusive of GST)Bonka 7.4V 2500mAh 3C 2S (TX) Lithium Polymer Battery Pack
₹1,046.00 (Price is Exclusive of GST) -
Bonka 22.2V 16000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
- Voltage(V): 22.2
- Configuration: 6S
- Capacity (mAh): 16000
- Discharge Rate: 5C
₹19,715.00 (Price is Exclusive of GST)Bonka 22.2V 16000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
₹19,715.00 (Price is Exclusive of GST) -
Bonka 22.2V 22000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
- Voltage(V): 22.2
- Configuration: 6S
- Capacity (mAh): 22000
- Discharge Rate: 5C
₹26,359.00 (Price is Exclusive of GST)Bonka 22.2V 22000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
₹26,359.00 (Price is Exclusive of GST) -
Bonka 22.2V 27000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
- Voltage(V): 22.2
- Configuration: 6S
- Capacity (mAh): 27000
- Discharge Rate: 5C
₹37,314.00 (Price is Exclusive of GST)Bonka 22.2V 27000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
₹37,314.00 (Price is Exclusive of GST) -
Bonka 22.8V 550mAh 90C 6S HV Lithium Polymer Battery Pack
- Voltage(V): 22.8
- Capacity (mAh): 550mAh
- Max Burst Discharge(C): 90c
- Configuration: 6s
₹2,104.00 (Price is Exclusive of GST)Bonka 22.8V 550mAh 90C 6S HV Lithium Polymer Battery Pack
₹2,104.00 (Price is Exclusive of GST) -
Bonka 15.2V 550mAh 90C 4S HV Lithium Polymer Battery Pack
- Voltage(V): 15.2
- Capacity (mAh): 550mAh
- Max. Burst Discharge (C): 90C
- Configuration: 4s
₹1,444.00 (Price is Exclusive of GST)Bonka 15.2V 550mAh 90C 4S HV Lithium Polymer Battery Pack
₹1,444.00 (Price is Exclusive of GST) -
Herewin 22.2V 16000mAh 25C 6S Lithium Polymer Battery Pack
- 16,000mAh capacity for long flight times
- 6S configuration (22.2V) for high-power systems
- 25C discharge rate for stable power
- Durable and lightweight
- Safe with built-in protection
₹15,098.00 (Price is Exclusive of GST)Herewin 22.2V 16000mAh 25C 6S Lithium Polymer Battery Pack
₹15,098.00 (Price is Exclusive of GST) -
Herewin 22.2V 22000mAh 25C 6S Lithium Polymer Battery Pack
Features:
- High Capacity: Available in 12000mAh, 16000mAh, and 22000mAh options, offering extended flight times and higher energy density.
- Powerful Performance: Delivers substantial power with capacities of up to 488.4Wh, ensuring reliable and long-lasting energy for UAVs and other high-demand applications.
- High Discharge Rate: Discharge rates of 20C for 12000mAh & 16000mAh, and 25C for the 22000mAh model, providing rapid power release for demanding drone operations.
- Max Charge Current: Supports fast charging with up to 2C, ensuring quicker turnaround times for battery recharges.
- Wide Temperature Range: Operates efficiently between 0°C to 40°C, suitable for various environments and weather conditions.
- Safety and Durability: Includes high industry standards for safety, cycle life, and resistance to swelling, making it a reliable and long-lasting solution.
- Versatile Use: Ideal for UAVs, remote control cars, boats, and planes, catering to high-capacity and long runtime needs across different applications
₹17,067.00 (Price is Exclusive of GST)Herewin 22.2V 22000mAh 25C 6S Lithium Polymer Battery Pack
₹17,067.00 (Price is Exclusive of GST) -
Bonka 11.1V 4200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Voltage(V): 11.1
- Configuration: 3S
- Capacity (mAh): 4200
- Discharge Rate: 45C
₹3,200.00 (Price is Exclusive of GST)Bonka 11.1V 4200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹3,200.00 (Price is Exclusive of GST) -
Bonka 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Voltage(V): 11.1
- Configuration: 3S
- Capacity (mAh): 5200
- Discharge Rate: 45C
₹3,727.00 (Price is Exclusive of GST)Bonka 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹3,727.00 (Price is Exclusive of GST)
