-
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
₹144.00 (excl. GST) -
KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Wireless Module
- Operating Voltage: 3.3-5VDC
- Operating Current: 35mA
- Bluetooth Version: 4.2
- Stereo Channel Output
₹330.00 (excl. GST)KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Wireless Module
₹330.00 (excl. GST) -
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 4V to 16V
- Maximum Motor Current: 3A continuous, 5A peak
- Buck-boost regulator to produce 5V output (200mA max).
- Buttons for quick testing.
₹718.00 (excl. GST)Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
₹718.00 (excl. GST) -
80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
- Color: Yellow
- Weight: 44g (each)
- Inner diameter: 3.3mm
- Outer wheel diameter: 60mm
- Thickness: 37mm
- Captive Screw Diam
₹679.00 (excl. GST)80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
₹679.00 (excl. GST) -
6 Flexible Arms Soldering Station With Swiveling Alligator Clip
- Total Weight: 400 gm
- Each Arm length: 34 cm
- Alligator clip(L): 44mm (large size)
- Alligator clips maximum thickness limit: 6mm
- Built-in Trays for components and screws.
- 6 flexible arms each with a large swiveling alligator clip.
- 6+1 pockets in beautifully base to hold loose components.
- 6 Silicon clip tips for the ultimate heat resistance.
₹1,502.00 (excl. GST)6 Flexible Arms Soldering Station With Swiveling Alligator Clip
₹1,502.00 (excl. GST) -
6000ZZ Bearing 10x26x8 Stainless Steel Bearings (4Pcs)
- Model: 6000ZZ
- Inside diameter: 10 mm
- Outside diameter: 26 mm
- Width: 8 mm
- Weight: 70 gm. (Each has 17 gm)
₹154.00 (excl. GST)6000ZZ Bearing 10x26x8 Stainless Steel Bearings (4Pcs)
₹154.00 (excl. GST) -
DC5V Humidifier USB Spray Module DIY Incubation Experiment Equipm 108KHz
- Work Voltage:DC 4.5V~5.0V
- Work Power:2W
- Work Frequency:108KHz(+/-3KHz)
- Come with a driver
- Power-ON trigger work
- 108KHz high frequency oscillator
₹216.00 (excl. GST)DC5V Humidifier USB Spray Module DIY Incubation Experiment Equipm 108KHz
₹216.00 (excl. GST) - Work Voltage:DC 4.5V~5.0V
-
Pro-Range 12V 60 RPM Johnson Geared DC Motor – Grade A Quality-Encoder Compatible
- Base Motor RPM: 18000
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 157.6 N-cm
- Stall Torque: 850 N-cm
- Gearbox Dimensions: 29×37 (LxW) mm
₹435.00 (excl. GST) -
Pro-Range INR 18650 11.1V 2000mAh 3C 3S1P Li-Ion Battery Pack with DC Jack Male & Female
- Nominal Capacity (mAh): 2000
- Nominal Voltage (v): 11.1
- Max Charging Voltage (v): 12.6
- Charge Port: DC Female
- Discharge Port: DC Male
₹840.00 (excl. GST) -
₹1,246.00 (excl. GST)
Orange 7.4V 2200mAh 30C 2S Lithium Polymer Battery Pack
₹1,246.00 (excl. GST) -
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution: 24 bit.
₹43.00 (excl. GST)HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
₹43.00 (excl. GST) -
Official Raspberry Pi M.2 HAT+
- Fast Data Transfer: Achieve speeds of up to 450 Mbytes/s with the 4 Gbits/s PCIe 2.0 interface for NVMe SSDs and PCIe accessories.
- Seamless Compatibility: Fully compliant with HAT+ specification for easy integration with Raspberry Pi 5.
- Plug-and-Play: Automatically detected by the latest Raspberry Pi software and firmware.
- Easy Installation: Comes with a 16mm stacking header, spacers, and screws for convenient setup with the Active Cooler in place.
₹978.00 (excl. GST)Official Raspberry Pi M.2 HAT+
₹978.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale