-
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST)
-
2WD Smart Robot Car Acrylic Chassis Kit
- Outline Size: 135 x 135 x 80mm
- The round acrylic plate diameter: 130mm
- Another acrylic plate size: 135 x 75mm
₹250.00 (excl. GST)2WD Smart Robot Car Acrylic Chassis Kit
₹250.00 (excl. GST) -
3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
This heat sinks haves short profiles that are enough to fit within standard raspberry pi cases. Includes one large and two small heat sinks.Easy to apply heatsinks for a raspberry pi board.
₹11.00 (excl. GST)3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
₹11.00 (excl. GST) -
3 in 1 Soil Tester Meter for Garden Lawn Plant Pot for Moisture, Light Meter, PH Sensor Tool Three-in-one Round Soil Tester
- 3 in 1 Soil Tester Meter
- Easy to use: no battery needed, plug and read.
- Scientifically accurate: keep your plants in a healthy range.
- Simply insert the probes into the soil, and you’ll get your reading.
₹450.00 (excl. GST) -
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
3 Series 20A 18650
Specifications:
Battery : 3 CellOvercharge detection voltage (V) : 4.25±0.025
Discharge voltage range (V) : 2.3 ~ 3.0±0.05v
Continuous charge current (A) : 20
Operational Temperature (°C) : -40 ~ +50
Length (mm) : 59
Width (mm) : 20
Height (mm) : 4
Weight (gm) : 4
₹70.00 (excl. GST)3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
₹70.00 (excl. GST) -
3 Series 40A 18650 11.1V 12.6V Lithium Battery Protection Board with Balance for Drill Motor Lipo Cell Module
- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
₹130.00 (excl. GST) -
₹62.00 (excl. GST)3-Cell 18650 Battery Holder Series-Parallel
₹62.00 (excl. GST) -
3.3 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 3.3 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 3.3 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹25.00 (excl. GST)3.3 Ohm Carbon Film Resistor- Pack of 50 pcs
₹25.00 (excl. GST) -
3.3K Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 3.3k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 3.3 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (excl. GST)3.3K Ohm Carbon Film Resistor- Pack of 50 pcs
₹50.00 (excl. GST) -
3.3V/5V MB102 Breadboard Power Supply Module
Features :
- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
₹46.00 (excl. GST)3.3V/5V MB102 Breadboard Power Supply Module
₹46.00 (excl. GST) -
3.5″ Touch Screen LCD Raspberry Pi Display
Features:
- Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
- Supports all revision of Raspberry Pi (directly-pluggable models)
- Works with Raspbian/Ubuntu directly
- Comes with a full set of screws and nuts for assembly
- 320×480 resolution, better display
- Lightweight and easy to install
₹1,580.00 (excl. GST)3.5″ Touch Screen LCD Raspberry Pi Display
₹1,580.00 (excl. GST) -
3*6*2.5 mm SMD Tactile Switch (Pack of 20)
3*6*2.5 mm SMD Tactile Switch
- Used in the fields of electronic products, household appliances and more.
-
This light touch switch is waterproof, prevent oil, anti-pollution, anti-static interference.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical Conductivity.
₹66.00 (excl. GST)3*6*2.5 mm SMD Tactile Switch (Pack of 20)
₹66.00 (excl. GST) -
30A Intelligent LCD Solar Controller
Features:
- Built-In Industrial Micro Controller
- Big LCD Display
- Full 4 Stage PWM Charge Management
- Dual MOSFET Reverse Current Protection
- Low Heat Production
₹376.00 (excl. GST)30A Intelligent LCD Solar Controller
₹376.00 (excl. GST)