-
1 Channel 12V Relay Module
- The relay high-level pull-in, the module contains current-limiting resistance, a high level can be DC +, microcontroller I / O port can be set high;
- Fault-tolerant design, even if the control line is broken, the relay will not move;
- Power indicator (red), 1 relay status indicator (blue)
- User-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient
- With four fixing bolt holes, easy to install
₹45.00 (Price is Exclusive of GST)1 Channel 12V Relay Module
₹45.00 (Price is Exclusive of GST) -
Original Arduino Uno Rev3 SMD Atmega328P Development Board
Features-
- Flash Memory – 32 KB (ATmega32u4) of which 4 KB used by boot loader
- SRAM – 2 KB (ATmega328P)
- EEPROM – 1 KB (ATmega328P)
₹1,635.00₹1,999.00(Price is Exclusive of GST)Original Arduino Uno Rev3 SMD Atmega328P Development Board
₹1,635.00₹1,999.00(Price is Exclusive of GST) -
IMAX B3 7-4V 11-1V Lithium Lipo RC Battery Balance Charge
Input voltage: AC 110V-240V
Balance charge current: 850mA
Display: Green & Red LED
Case: Plastic
Max charge power:10WBalance Charger for 7.4V-11.1V
₹215.00 (Price is Exclusive of GST)IMAX B3 7-4V 11-1V Lithium Lipo RC Battery Balance Charge
₹215.00 (Price is Exclusive of GST) -
16×2 Yellow or Green Backlight Alphanumeric Character LCD Display
- 16×2 LCD display Green LED Backlight
- The contrast of the screen can also be controlled by varying the voltage at the contrast control pin
- It is easy to interface with most micro controllers
₹90.00 (Price is Exclusive of GST)16×2 Yellow or Green Backlight Alphanumeric Character LCD Display
₹90.00 (Price is Exclusive of GST) -
ULN2003 Stepper Motor Driver IC
- 500-mA-Rated Collector Current (Single Output)
- High-Voltage Outputs: 50 V
- Output Clamp Diodes
- Inputs Compatible With Various Types of Logic
- Relay-Driver Applications
₹15.00 (Price is Exclusive of GST)ULN2003 Stepper Motor Driver IC
₹15.00 (Price is Exclusive of GST) -
Raspberry Pi 4 Model B 2GB RAM
Raspberry Pi 4 Model 2GB RAM capacity provides a huge scope for various multi-tasking activities, running powerful data servers, projects, virtual machines etc. This mini-computer is a better alternative since it is both energy efficient and cost effective. It is a silent machine and uses less energy than any other computer. It provides faster networking as it comes with a Gigabit Ethernet and onboard wireless networking along with better bluetooth connectivity. It can transfer data 10 times faster with the help of two USB 3.0 ports and two USB 2.0 ports.
₹3,954.00₹4,899.00(Price is Exclusive of GST)Raspberry Pi 4 Model B 2GB RAM
₹3,954.00₹4,899.00(Price is Exclusive of GST) -
PCB Mounting Type 2 Cell Holder 18650 Battery Holder
- Material Plastic, Steel
- No Soldering Just Plug and Use standatd battery
- High quality and strong material
₹40.00 (Price is Exclusive of GST)PCB Mounting Type 2 Cell Holder 18650 Battery Holder
₹40.00 (Price is Exclusive of GST) -
ATmega328P Micro-Controller IC
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
₹300.00 (Price is Exclusive of GST)ATmega328P Micro-Controller IC
₹300.00 (Price is Exclusive of GST) -
XL6009 boost converter DC-DC Booster Step Up Power supply module
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
₹46.00 (Price is Exclusive of GST)XL6009 boost converter DC-DC Booster Step Up Power supply module
₹46.00 (Price is Exclusive of GST) -
₹10.00 (Price is Exclusive of GST)TTP223 Touch Sensor Module
₹10.00 (Price is Exclusive of GST) -
White Type C cable – 1m for Arduino Nano V3.0
Features:
- Allows you to connect Arduino NanoV3.0 with USB port to the computer.
- Good data transfer rate.
₹42.70 (Price is Exclusive of GST)White Type C cable – 1m for Arduino Nano V3.0
₹42.70 (Price is Exclusive of GST) -
Thermoelectric Peltier Refrigeration Cooling System DIY Kit with 12706 Peltier
Package Includes:
1 x Cooling Fan
1 x Fan Gauze
1 x Guide cold plate
1 x Radiator
1 x Thermal insulation gasket
1 x Pack of Screws₹460.00₹635.00(Price is Exclusive of GST)Thermoelectric Peltier Refrigeration Cooling System DIY Kit with 12706 Peltier
₹460.00₹635.00(Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
