-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
Features:
- Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury
- Throttle range calibrated function: to adapt the throttle differences between different strokes, improve the linearity of throttle response
- programmed project (available throttle stick or card LED parameter settings):
- Brake setting: No brake / with brake
- Battery Type: Lithium battery / NiMH
- Low Voltage Protection Mode: Soft Shutdown / hard off
- Low Voltage Protection Threshold: low / medium / high
- start mode: Normal / Soft / Super-soft and start
- Timing: low / medium / high
- Restore factory defaults
- Comprehensive protection features:
- Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power
- Overvoltage Protection: input voltage exceeds the input range are not allowed to start, automatic protection, also issued a hasty “beep” Warning
- Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high
- Remote signal loss protection: remote control signal is lost for 1 second to reduce the power, and then have two seconds to turn off without the remote control signal output
₹1,866.00 (excl. GST)Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
₹1,866.00 (excl. GST) -
BMS 15S 48V 40A DALY LiFePo4 Waterproof Battery Management System
BMS 15S 48V 40A
Specification:-
- Balance Current (mA): 30±5
- Balance Detect Voltage (V): 3.5
- Cable Size (AWG): 10
- Charge Current (A): 20
- Charge Voltage (V): 54.75
- Height (mm): 10.6
- Length (mm): 81.5
- Model: 15S 48V 40A
- Over Discharge Detect (V): 2.2±0.05
- Over Discharge Release (V): Off load
- Overcharge Detect Voltage (V): 3.75±0.05
- Overcharge Release Voltage (V): 3.55±0.05
- Width (mm): 60.6
- Working Current (uA): 100
- Working Temperature Range (°C): -20 to 70
₹1,800.00 (excl. GST)BMS 15S 48V 40A DALY LiFePo4 Waterproof Battery Management System
₹1,800.00 (excl. GST) -
₹1,750.00 (excl. GST)Arduino UNO Kit – Professional Electronics Starter DIY Kit – V1
₹1,750.00 (excl. GST) -
Arduino UNO DIY Kit – Professional Electronics Starter DIY Kit – V2
This DIY Kit with UNO R3, USB Cable, LEDs, Buzzer, Switch, Breadboard, Servo SG90 Motor, PIR Motion Sensor, Ultrasonic Sensor, LCD 16×2, 4×4 Keypad, IR sensors, Relay board, L293D Motor Driver Board, Male and Female Header Strips and Jumper Wires
₹1,699.99₹2,350.00(excl. GST)Arduino UNO DIY Kit – Professional Electronics Starter DIY Kit – V2
₹1,699.99₹2,350.00(excl. GST) -
DC Geared Motor with Encoder 16 RPM 138N.Cm 12V SPG30E-270K
DC Geared Motor
- Rated Voltage: 12 V
- No-load Current: 70 mA
- Rated Current: 410 mA
- Rated Torque: 14 kg-cm
- Shaft Diameter: 6 mm
- Gear Ratio: 270:1
₹1,690.00 (excl. GST)DC Geared Motor with Encoder 16 RPM 138N.Cm 12V SPG30E-270K
₹1,690.00 (excl. GST) -
Lemon 2200mAh Lithium Polymer Battery Pack (3S 60C/120C)
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,684.00 (excl. GST)Lemon 2200mAh Lithium Polymer Battery Pack (3S 60C/120C)
₹1,684.00 (excl. GST) -
MK4 Ultron Arduino Based Development Board
- The MK 4 is a specialized, high-quality Arduino-based development board designed for a variety of electronic projects and educational purposes.
- This board features the robust ATmega 328P microcontroller, ensuring reliable performance for both DIY enthusiasts and professionals.
- It comes with an integrated motor driver, making it perfect for robotics and automation projects.
- The MK 4 includes a built-in buzzer and power pins, enhancing its functionality.
- The fastest bootloader ensures quick and efficient start-up times.
- Additionally, the Type-C cable provided makes programming straightforward and convenient.
₹1,650.00 (excl. GST)MK4 Ultron Arduino Based Development Board
₹1,650.00 (excl. GST) -
Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
Features:
- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid-state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 20KHz. Support both locked-antiphase and sign-magnitude PWM operation.
- 2 activation buttons for fast test on each channel.
₹1,650.00 (excl. GST)Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
₹1,650.00 (excl. GST) -
DSO138 Oscilloscope Kit
DSO138 Oscilloscope Kit
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as the ARM test development board.
- Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
- Adjustable vertical displacement, and with instructions.
- With automatic, regular and one-shot modes, easy to capture the moment waveform.
- Available rising or falling edge trigger.
- Observable previous trigger waveform (negative delay).
- Can freeze at any time waveform display (the HOLD function).
- Comes 1Hz /3.3V square wave test signal source.
- With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
₹1,645.00 (excl. GST)DSO138 Oscilloscope Kit
₹1,645.00 (excl. GST) -
Lemon 2200mAh Lithium Polymer Battery Pack (3S 45C/90C)
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,641.00 (excl. GST)Lemon 2200mAh Lithium Polymer Battery Pack (3S 45C/90C)
₹1,641.00 (excl. GST) -
Original Arduino Uno Rev3 SMD Atmega328P Development Board
Features-
- Flash Memory – 32 KB (ATmega32u4) of which 4 KB used by boot loader
- SRAM – 2 KB (ATmega328P)
- EEPROM – 1 KB (ATmega328P)
₹1,635.00₹1,999.00(excl. GST)Original Arduino Uno Rev3 SMD Atmega328P Development Board
₹1,635.00₹1,999.00(excl. GST)
