- “Samsung ICR18650-26JM 3.6V 2600mAh 2C Li-ion Battery” already exists in your wishlist
-
Weighing Load Cell Sensor 20kg
- Rated Load: 20Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
₹90.00 (Price is Exclusive of GST)Weighing Load Cell Sensor 20kg
₹90.00 (Price is Exclusive of GST) -
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Wheatstone bridge formation of Load Cell:
HX711 (24 bit Analog to Digital Converter)
HX 711 is a precision 24-bit analog to digital converter (ADC) specially designed for Weigh scales and industrial control applications to interface directly with a bridge sensor.
Simply connect Load cell wires to the HX711 module based on their color, then connect DAT (Data) pin to Arduino Analog pin A1 and connect CLK (Clock) pin to Arduin0 Analog pin A0, Put Vcc and GND supply from Arduino power source pins.
₹222.00 (Price is Exclusive of GST)Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
₹222.00 (Price is Exclusive of GST) -
WeMos d1 Mini pro – 16m Bytes External Antenna Connector esp8266 WiFi iot Board
- This is WEMOS D1 pro,it is a based on ESP-8266.
- New CP2104 USB-TO-UART IC.
- WIFI development board, 16M Bytes.
- Built-in ceramic antenna or external antenna.
- Same size as D1 mini, but more light.
₹665.00 (Price is Exclusive of GST)WeMos d1 Mini pro – 16m Bytes External Antenna Connector esp8266 WiFi iot Board
₹665.00 (Price is Exclusive of GST) -
WeMos d1 Mini- IOT ESP8266 Based Development Board
- Specification and Features :-
- 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
- 1 analog input(3.2V max input)
- Micro USB connection
- Use BRT (Bias Resistor Transistor), easier into flash mode.
- 30% increase in radiating area, more stable.
- Dimensions : 35 x 26 x 8 (LxWxH) mm.
- Weight: 10 gm.
- Board Color : Blue
- Compatible with Arduino
- Compatible with NodeMCU
- Compatible with MicroPython
₹200.00 (Price is Exclusive of GST)WeMos d1 Mini- IOT ESP8266 Based Development Board
₹200.00 (Price is Exclusive of GST) - Specification and Features :-
-
White Reed Switch Y213 2*14mm Normal Open
Features :
- Small Module.
- Very easy to use.
- Direct connection in the circuit.
₹16.79 (Price is Exclusive of GST)White Reed Switch Y213 2*14mm Normal Open
₹16.79 (Price is Exclusive of GST) -
White Type C cable – 1m for Arduino Nano V3.0
Features:
- Allows you to connect Arduino NanoV3.0 with USB port to the computer.
- Good data transfer rate.
₹42.70 (Price is Exclusive of GST)White Type C cable – 1m for Arduino Nano V3.0
₹42.70 (Price is Exclusive of GST) -
Wire Clipper Nipper
Suitable for dressing components on printed circuit boards. Handles made out of ABS plastics. Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip.
₹65.00 (Price is Exclusive of GST)Wire Clipper Nipper
₹65.00 (Price is Exclusive of GST) -
Wire Cutter and Stripper
- Flawless Finish
- Optimum Strength
- Best Quality
- Cutting range of wire 0.5mm to 2.5mm & 6mm
- Also Suitable for Electronic, Aviation &Â Automobile sectors
₹65.00 (Price is Exclusive of GST)Wire Cutter and Stripper
₹65.00 (Price is Exclusive of GST) -
WLY501012 3.7V 40mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
- Capacity (mAh): 40
- Dimension: 5mm X 10mm X 12mm
- Max. Charge/Discharge Rate (C): 1C
- Model No: WLY501012
- Applications: Wearables / Micro Drone / IoT
₹125.00 (Price is Exclusive of GST)WLY501012 3.7V 40mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
₹125.00 (Price is Exclusive of GST) -
WLY501014 3.7V 50mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
- Capacity (mAh): 50
- Dimension: 5mm X 10mm X 14mm
- Max. Charge/Discharge Rate (C): 1C
- Model No: WLY501014
- Applications: Wearables / Micro Drone / IoT
₹125.00 (Price is Exclusive of GST)WLY501014 3.7V 50mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
₹125.00 (Price is Exclusive of GST) -
WLY52535 3.7V 450mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
- Capacity (mAh): 450
- Dimension: 5mm X 25mm X 35mm
- Max. Charge/Discharge Rate (C): 1C
- Model No: WLY52535
- Applications: Wearables / Micro Drone / IoT
₹232.00 (Price is Exclusive of GST)WLY52535 3.7V 450mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
₹232.00 (Price is Exclusive of GST) -
WLY602030 3.7V 300mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
- Capacity (mAh): 300
- Dimension: 6mm X 20mm X 30mm
- Max. Charge/Discharge Rate (C): 1C
- Model No: WLY602030
- Applications: Wearables / Micro Drone / IoT
₹125.00 (Price is Exclusive of GST)WLY602030 3.7V 300mAh 1S LiPo Battery – Micro Rechargeable Battery Pack for Wearables / Micro Drone / IoT
₹125.00 (Price is Exclusive of GST)
