-
MQ4 Gas Sensor Detector Module
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
₹85.00 (Price is Exclusive of GST)MQ4 Gas Sensor Detector Module
₹85.00 (Price is Exclusive of GST) -
₹85.00 (Price is Exclusive of GST)
MQ3 Gas Sensor Detector Module
₹85.00 (Price is Exclusive of GST) -
MQ2 Flammable Gas and Smoke Sensor Module
Specifications:-
- Power Supply: 5 Volts
- Interface Type: Analog & Digital
- High Sensitivity to Smoke & combustible gasses like Hydrogen, LPG & Propane.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
₹88.00 (Price is Exclusive of GST)MQ2 Flammable Gas and Smoke Sensor Module
₹88.00 (Price is Exclusive of GST) -
₹225.00 (Price is Exclusive of GST)
Raspberry Pi 3 Official Case Box ABS
₹225.00 (Price is Exclusive of GST) -
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (Lx W x H) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
₹750.00 (Price is Exclusive of GST)5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
₹750.00 (Price is Exclusive of GST) -
12V Suger Cube Relay Switch – PCB Mount
- 12V Relay DC operable for PCB Mount
- Low Power Consumption
- Load Capacity of 250V at 7amp
- Insulated body
- Contact Capacity: 10A 125V, 7A 250V
- Max Switching Current :7A
- Max Switching Voltage: 28V DC/ 250V AC
₹12.00 (Price is Exclusive of GST)12V Suger Cube Relay Switch – PCB Mount
₹12.00 (Price is Exclusive of GST) -
5V Relay Switch PCB Mount
- Trigger Voltage: 5V Relay Switch PCB Mount
- Trigger Current : 20 mA
- Maximum Switching Voltage:Â 250VAC@10A; 30VDC @10A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
₹12.00 (Price is Exclusive of GST)5V Relay Switch PCB Mount
₹12.00 (Price is Exclusive of GST) -
12V 4 Channel Relay Module
1.Trigger Voltage(VDC):12
2.Trigger Current (MA):20
3.Switching Voltage (VAC):250@10A
4.Switching Voltage (VDC):30@10A
5.Operating Temperature (°C):-40 to 85
6.Opt. Relative Humidity(RH):20% ~ 85%
7.Storage condition (℃):-65 to 125
₹141.00 (Price is Exclusive of GST)12V 4 Channel Relay Module
₹141.00 (Price is Exclusive of GST) -
12V 2 Channel Relay Module
1.Trigger Voltage(VDC):12
2.Trigger Current (MA):20
3.Switching Voltage (VAC):250@10A
4.Switching Voltage (VDC):30@10A
5.Operating Temperature (°C):-40 to 85
6.Opt. Relative Humidity(RH):20% ~ 85%
7.Storage condition (℃):-65 to 125
₹113.00 (Price is Exclusive of GST)12V 2 Channel Relay Module
₹113.00 (Price is Exclusive of GST) -
1 Channel 12V Relay Module
- The relay high-level pull-in, the module contains current-limiting resistance, a high level can be DC +, microcontroller I / O port can be set high;
- Fault-tolerant design, even if the control line is broken, the relay will not move;
- Power indicator (red), 1 relay status indicator (blue)
- User-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient
- With four fixing bolt holes, easy to install
₹45.00 (Price is Exclusive of GST)1 Channel 12V Relay Module
₹45.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED’s for Relay output status.
₹105.00 (Price is Exclusive of GST)4 Channel 5V Relay Module
₹105.00 (Price is Exclusive of GST) -
2 Channel 5V Relay Module
- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
₹55.00 (Price is Exclusive of GST)2 Channel 5V Relay Module
₹55.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale












