-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
- “Samsung INR 21700 50S 44.4 V 20000 mAh 12s4p 140A/180A Discharge Li-ion EFT Agriculture Drone Battery Pack” already exists in your wishlist
-
2 Pin Tactile Micro Switch
- High precision mechanism design offers acute operation and long service life.
- Used in the fields of electronic products, household appliances and more.
- Feature momentary contact, 2 pins, round black push button, through hole mounting
- Size: 6 x 6 x 5mm. 2 Pin
₹1.50 (Price is Exclusive of GST)2 Pin Tactile Micro Switch
₹1.50 (Price is Exclusive of GST) -
PMBT3904,215-Nexperia-40V 250mW 100@10mA,1V 200mA NPN SOT-23 Bipolar (BJT) ROHS
Quantity Range Price / Qty 3000+ ₹ 1.11 ₹1.11 (Price is Exclusive of GST)PMBT3904,215-Nexperia-40V 250mW 100@10mA,1V 200mA NPN SOT-23 Bipolar (BJT) ROHS
₹1.11 (Price is Exclusive of GST) -
3.3k Ohm 1/4W 0603 Surface Mount Chip Resistor
- Resistance: 3.3kΩ.
- Tolerance: 1%.
- Dielectric Withstanding Voltage: 150V.
- Surface-mount chip resistor.
₹0.49 (Price is Exclusive of GST)3.3k Ohm 1/4W 0603 Surface Mount Chip Resistor
₹0.49 (Price is Exclusive of GST) -
4G Lte Gsm Modem (A7672S)
- Model Name/Number: A7672S
- Output Voltage:Â 3.4V ~ 4.2V
- Compact size with abundant interfaces
- Suitable for LTE and GSM networks
- Abundant software functions: FOTA, LBS, SSL
- Form factor is compatible with the SIM7000/SIM7070 series
-
LED (Light Emitting Diode) 3MM
- 10 pieces for each color and size
- Five different colors: Red/Yellow/Green/Blue/White
- Two different sizes: 5mm/3mm
- Round Small Lens
- Polarity: Anode (Longer Part)/Cathode (Shorter Part)
-
RFID Card for Smart Access Control
Features:
- High security.
- The recorded content can be erased repeatedly.
- Can run away from the computer platform to achieve the Internet and offline automatic conversion mode of operation, to achieve a wide range of use, less wiring needs.
-
NodeMcu ESP8266 Based Wireless Development Module for IOT
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
-
25W Soldering Rod Iron
- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
- High Quality Built Material.
-
Servo Motor MG995 Metal Gear 180 Degree
- Standard Mini Micro Servo Gear
- Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS.
- Stable and Shock Proof
- Connector Wire Length 300mm
- Power Supply: Through External Adapter
-
DC L-Shaped BO Motor for Smart Car Robot
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.8 Kgcm
-
DC Geared Motor – 12V (10 to 1000 RPM)
- DC supply: 4 to 12V
- Total length: 46mm
- Motor diameter: 36mm
- Motor length: 25mm
- Brush type: Precious metal
- Gear head diameter: 37mm
- Gear head length: 21mm
- Output shaft: Centred
- Shaft diameter: 6mm
- Shaft length: 22mm
- Gear assembly: Spur
- Same size motor available in various RPM
