No products in the cart.
1 Channel 12V Relay Module
- The relay high-level pull-in, the module contains current-limiting resistance, a high level can be DC +, microcontroller I / O port can be set high;
- Fault-tolerant design, even if the control line is broken, the relay will not move;
- Power indicator (red), 1 relay status indicator (blue)
- User-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient
- With four fixing bolt holes, easy to install
₹35.00 (Price is Exclusive of GST)1 Channel 12V Relay Module
₹35.00 (Price is Exclusive of GST)Arduino Mega 2560 R3 with USB Cable Compatible with Arduino
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
₹850.00₹1,475.00(Price is Exclusive of GST)Arduino Mega 2560 R3 with USB Cable Compatible with Arduino
₹850.00₹1,475.00(Price is Exclusive of GST)3296W 1k Ohm Trimpot Trimmer Potentiometer
Specification
- Series: 3296
- Resistance Tolerance : 10%
- Mounting Style: PCB Mount
- Adjustment: Top Slot
- Number of Turns: Multiturn
₹12.00 (Price is Exclusive of GST)3296W 1k Ohm Trimpot Trimmer Potentiometer
₹12.00 (Price is Exclusive of GST)EM-18 RFID Reader module
- Operating Voltage: 5V DC Supply
- Reading Distance: 6-10 cm.
- Read frequency: 125 kHz.
- EM4001 64 – bit RFID tag compatible.
- 9600bps ASCII output.
- Current : <50 mA
- Operating Frequency : 125 Khz
- Read Distance : 5 cm
- Compatible Tags : 125KHz EM4100 Tags
₹200.00 (Price is Exclusive of GST)EM-18 RFID Reader module
₹200.00 (Price is Exclusive of GST)Buzzer Module Board-3.3 to 5V
- Operating voltage: 3.3V-5V
- PCB Dimension: 3.1cm*1.3cm.
- Color: Blue
- Easy to use
₹30.00 (Price is Exclusive of GST)Buzzer Module Board-3.3 to 5V
₹30.00 (Price is Exclusive of GST)Combination Screwdriver Set (Pack of 31) – JK 6036
Meet the Jackly 31-in-1 ratchet screwdriver set – the tool that every household should have. With this compact screwdriver set, you can complete all the pending repair works by opening mobile phones, computers, PDA housings, PSPs, NDS, and music players.
₹145.00 (Price is Exclusive of GST)Combination Screwdriver Set (Pack of 31) – JK 6036
₹145.00 (Price is Exclusive of GST)DC 3V – 12V Amphibious Horizontal Micro Pump
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
₹60.00 (Price is Exclusive of GST)DC 3V – 12V Amphibious Horizontal Micro Pump
₹60.00 (Price is Exclusive of GST)Soil Moisture Sensor Module
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
₹32.00₹45.00(Price is Exclusive of GST)Soil Moisture Sensor Module
₹32.00₹45.00(Price is Exclusive of GST)LM2596 DC Step Down Buck Converter Power Supply Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
₹55.00 (Price is Exclusive of GST)LM2596 DC Step Down Buck Converter Power Supply Module
₹55.00 (Price is Exclusive of GST)Dual-axis XY Joystick Module
- Input voltage range: DC 3.3V to 5V, Quality rocker, long life, stable performance
- Two analog outputs, one digital output
- X, y-axis output of the two potentiometers can be read out through the a to d converter
- Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change. This module uses 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the arrow direction, the read voltage value increases with the maximum to 5V; arrows in the opposite direction to press, read the voltage decreases , The minimum is 0V.
- Package content: 1 joystick module
₹42.00 (Price is Exclusive of GST)Dual-axis XY Joystick Module
₹42.00 (Price is Exclusive of GST)XT60 Male Connectors-2pcs
Specifications and Features:
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash
₹40.00 (Price is Exclusive of GST)XT60 Male Connectors-2pcs
₹40.00 (Price is Exclusive of GST)Micro soldering station 12v adjustable temperature
LOW VOLTAGE SOLDERING PEN; The majority of soldering irons have three basic temperature designs: 1) no temperature control designs, which are usually the least expensive and suitable for household soldering jobs, plug in and are ready to go after they’ve warmed up; 2) temperature-controlled soldering irons allow you to be sure that the soldering iron tip maintains the right temperature, but they are more expensive than basic soldering irons; and 3) soldering stations — which consist of a benchtop control unit and a soldering iron specifically designed for the unit, and which are the most expensive type of soldering iron If you are a professional or you plan to do a lot of soldering, consider a Freaks elect soldering station first.
₹450.00 (Price is Exclusive of GST)Micro soldering station 12v adjustable temperature
₹450.00 (Price is Exclusive of GST)