-
2 Pin Tactile Micro Switch
- High precision mechanism design offers acute operation and long service life.
- Used in the fields of electronic products, household appliances and more.
- Feature momentary contact, 2 pins, round black push button, through hole mounting
- Size: 6 x 6 x 5mm. 2 Pin
₹1.50 (Price is Exclusive of GST)2 Pin Tactile Micro Switch
₹1.50 (Price is Exclusive of GST) -
PMBT3904,215-Nexperia-40V 250mW 100@10mA,1V 200mA NPN SOT-23 Bipolar (BJT) ROHS
Quantity Range Price / Qty 3000+ ₹ 1.11 ₹1.11 (Price is Exclusive of GST)PMBT3904,215-Nexperia-40V 250mW 100@10mA,1V 200mA NPN SOT-23 Bipolar (BJT) ROHS
₹1.11 (Price is Exclusive of GST) -
3.3k Ohm 1/4W 0603 Surface Mount Chip Resistor
- Resistance: 3.3kΩ.
- Tolerance: 1%.
- Dielectric Withstanding Voltage: 150V.
- Surface-mount chip resistor.
₹0.49 (Price is Exclusive of GST)3.3k Ohm 1/4W 0603 Surface Mount Chip Resistor
₹0.49 (Price is Exclusive of GST) -
Raspberry Pi Compute Module 5 Development Kit
- Includes CM5104032 Compute Module 5 and IO Board.
- Comes with a case, passive cooler, and antenna kit.
- Ideal for prototyping, IoT, and industrial designs.
- Simplifies “out-of-the-box” development.
-
Raspberry Pi Pico
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
-
LED (Light Emitting Diode) 3MM
- 10 pieces for each color and size
- Five different colors: Red/Yellow/Green/Blue/White
- Two different sizes: 5mm/3mm
- Round Small Lens
- Polarity: Anode (Longer Part)/Cathode (Shorter Part)
-
RFID Card for Smart Access Control
Features:
- High security.
- The recorded content can be erased repeatedly.
- Can run away from the computer platform to achieve the Internet and offline automatic conversion mode of operation, to achieve a wide range of use, less wiring needs.
-
NodeMcu ESP8266 Based Wireless Development Module for IOT
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
-
25W Soldering Rod Iron
- Attains full operating Temperature within a seconds.
- Maintains constant tip temperature.
- Low Leakage Current.
- Safe for the use on dedicated and sensitive Components.
- Maximum Heat transfer efficiency.
- Slide on a Replaceable tip.
- Cool Grip Insulating Nylon Handle
- High Quality Built Material.
-
Servo Motor MG995 Metal Gear 180 Degree
- Standard Mini Micro Servo Gear
- Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS.
- Stable and Shock Proof
- Connector Wire Length 300mm
- Power Supply: Through External Adapter
-
DC L-Shaped BO Motor for Smart Car Robot
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.8 Kgcm
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
