-
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Flame Induction Fan kit School Science DIY Kit
Age Range : 8 to 13 YearsOEM & ODM : Available₹545.00 (Price is Exclusive of GST)Flame Induction Fan kit School Science DIY Kit
₹545.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹462.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹462.00 (Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST)
- “BAK NMC N18650CNP 3.6V 2500mAh 8C Li-ion Battery” already exists in your wishlist
-
Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
Timing Pulley
- Material: Steel
- Length of Allen Key: 48 mm
- Width of Allen Key: 1.4 mm
- Inner Diameter of grub: 2 mm
- Outer Diameter of Grub: 3.8 mm
₹16.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
₹16.00 (Price is Exclusive of GST) -
OP07CP Amplifier ICs
OP07CP Amplifier ICs
- IC Name: OP07
- Package/Case: DIP-8
₹16.00 (Price is Exclusive of GST)OP07CP Amplifier ICs
₹16.00 (Price is Exclusive of GST) -
White Reed Switch Y213 2*14mm Normal Open
Features :
- Small Module.
- Very easy to use.
- Direct connection in the circuit.
₹16.79 (Price is Exclusive of GST)White Reed Switch Y213 2*14mm Normal Open
₹16.79 (Price is Exclusive of GST) -
Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
Timing Pulley
Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for 3D Printers
₹17.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
₹17.00 (Price is Exclusive of GST) -
Infrared (IR) Proximity/Obstacle Detecting Sensor Module
- BUY IN ORIGINAL FROM OLatus or OL ELECTRONICS STORE ONLY. WE WILL NOTE SUPPORT FAKE MODULES
- COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc.
- Useful for various Robotic Applications, Object Detection, Visitor Counter, etc
- Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)
₹18.00₹29.00(Price is Exclusive of GST)Infrared (IR) Proximity/Obstacle Detecting Sensor Module
₹18.00₹29.00(Price is Exclusive of GST) -
USB 2.0 Cable Type A/B for Arduino UNO
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
₹18.00 (Price is Exclusive of GST)USB 2.0 Cable Type A/B for Arduino UNO
₹18.00 (Price is Exclusive of GST) -
Micro USB 2.0 Cable Type A/B for Arduino Nano
- Up to 480 Mbps data transfer rate.
- USB Type: Type-A to Mini-B
- Weight: 15 gm
- Length: 30 cm
- Exclusively designed for Arduino boards.
₹18.00 (Price is Exclusive of GST)Micro USB 2.0 Cable Type A/B for Arduino Nano
₹18.00 (Price is Exclusive of GST) -
Potentiometer Shaft Rotary Volume Metallic 3 Pin
- Resistance: 1k Ω, 5kΩ, 10kΩ, 22kΩ, 47kΩ, 100kΩ, 470kΩ
- Tolerance: 20%.
- Shaft Length: 15mm.
₹18.00 (Price is Exclusive of GST)Potentiometer Shaft Rotary Volume Metallic 3 Pin
₹18.00 (Price is Exclusive of GST) -
₹18.00 (Price is Exclusive of GST)7 Segment LED Display
₹18.00 (Price is Exclusive of GST) -
9V Watt Battery
- Constant 9V Output till lasts.
- Metal Jacket Body.
- Easy to install and Replace
- Pack of 2 Battery.
₹18.00 (Price is Exclusive of GST)9V Watt Battery
₹18.00 (Price is Exclusive of GST) -
DB9 Female Welded Connector
- Solder cup configuration for longevity.
- Nickel-plated terminals.
- Gold plates pins.
- Good quality.
₹18.00 (Price is Exclusive of GST)DB9 Female Welded Connector
₹18.00 (Price is Exclusive of GST) -
Flame Sensor infrared Receiver Ignition source detection module
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
₹19.00 (Price is Exclusive of GST)Flame Sensor infrared Receiver Ignition source detection module
₹19.00 (Price is Exclusive of GST)
