-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)
-
Tactile DIP Switch Black (10 types -200pcs)
Features :
- Through-hole design.
- Shaft Shape: Round
- Base Size (mm): 6mm
- Middle stroke (1.05mm)
- Shaft Size: 10 different Size (find the details in Package Includes section below)
- High operating force (3.0N or 3.6N) suited to automotive equipment requirements
- The long life of 300,000 cycles realized despite the high operating force
- Used in the fields of electronic products, household appliances, and more.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
₹200.00 (excl. GST)Tactile DIP Switch Black (10 types -200pcs)
₹200.00 (excl. GST) -
Portable Resistor LED Potentiometer Kit for UNO R3
- 1 sets Handy Portable Resistor Kit for Arduino Starter Kit UNO R3 LED potentiometer tact switch pin header
- High Quality kit for arduino
₹150.00 (excl. GST)Portable Resistor LED Potentiometer Kit for UNO R3
₹150.00 (excl. GST) -
DIY Wire Controlled Large Eye Wood Robot
Product material: Wood
Overall width: About 60mm
Overall height: About 155mm₹300.00 (excl. GST)DIY Wire Controlled Large Eye Wood Robot
₹300.00 (excl. GST) -
DIY Solar Energy Revolving Bell Conversion of Light Energy to Electric Energy
-
Description
Overall height: 122mm
Overall width: 155mm
Power drive: solar panel
Product material: Wood
₹250.00 (excl. GST)DIY Solar Energy Revolving Bell Conversion of Light Energy to Electric Energy
₹250.00 (excl. GST) -
-
₹150.00 (excl. GST)
Rubber Band Powered Aircraft Model Kits Toy
₹150.00 (excl. GST) -
-
₹650.00 (excl. GST)DuPont Connector Kit -520pcs 2.54MM 1/2/3/4/5/6/7/8P
₹650.00 (excl. GST) -
Flame Induction Fan kit School Science DIY Kit
Age Range : 8 to 13 YearsOEM & ODM : Available₹545.00 (excl. GST)Flame Induction Fan kit School Science DIY Kit
₹545.00 (excl. GST) -
Intelligent road gate machine Science Kit Diy Kit
Category: Synthesis of Wooden ToysMaterial: Poplar WoodUsage: Puzzle₹950.00 (excl. GST)Intelligent road gate machine Science Kit Diy Kit
₹950.00 (excl. GST) -
200pcs 10 Values 1N4001-1N4007 1N5817-1N5819 Rectifier Diode Kit
Values in the kit-
- 1N4002,
- 1N4003,
- 1N4004,
- 1N4005,
- 1N4006,
- 1N4007,
- 1N5817,
- 1N5818,
- 1N5819
- 1N4001
₹320.00 (excl. GST)200pcs 10 Values 1N4001-1N4007 1N5817-1N5819 Rectifier Diode Kit
₹320.00 (excl. GST) -
₹865.00 (excl. GST)Sunflower kit in persuit of light (school science kit)
₹865.00 (excl. GST) -
Mechanical Arm DIY Kit
Mechanical Arm DIY Kit
Specification:
- Material: Wood
- Affordable 4-DOF manipulators.
- Highly versatile mechanical parts.
- Wood board laser cutting with precision.
- Easy to assemble.
₹690.00 (excl. GST)Mechanical Arm DIY Kit
₹690.00 (excl. GST)
