-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
-
Human Induction Fan Model Kit
The body sensing fan, in short, automatically turns on the fan when the body sensing module senses someone. When a person leaves the human body sensing module, the fan will automatically turn off, which is very intelligent.
₹500.00Human Induction Fan Model Kit
₹500.00 -
Gas Detection Alarm Sensor DIY Kit
Function Description:
With the continuous improvement of people’s living standards, gas and natural gas have entered thousands of households, bringing convenience to everyone but also posing many safety hazards. Gas poisoning accidents also occur from time to time. Therefore, we must conduct regular inspections of areas where gas leakage may occur. The gas detection and alarm circuit is composed of gas sensor MQ5, voltage comparator LM393, voice chip COO2, and other components. It can detect combustible gases in the air and automatically sound and light alarms₹225.00 -
Sun-Moon-Earth Three Ball Instrument Material Package
Hands-on ability: Nowadays, children generally lack hands-on ability, which helps to strengthen hands-on ability.
₹300.00 -
2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit
2 x Gear Motor
4 x “T” mode Fixed Motor Bracket
16 x M3X10mm Screw
8 x M3 Nut
4 x M3X12+6mm Copper Cylinder
4 x M3X30mm two-way Copper Colum₹400.00 -
3 in 1 Raspberry Pi Aluminium Heat Sink for Pi 3
This heat sinks haves short profiles that are enough to fit within standard raspberry pi cases. Includes one large and two small heat sinks.Easy to apply heatsinks for a raspberry pi board.
₹11.00 -
High Current Active Alarm Buzzer Driver Module
- Operating voltage 3.3V-5V
- PCB Dimension: 3.1cm*1.3cm.
- Color: Blue
- Easy to use
₹32.00 -
Weighing Load Cell Sensor 20kg
- Rated Load: 20Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
₹90.00 -
Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
₹255.00 -
Sensor Shield V5 Expansion Board For Arduino
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
₹65.00₹75.00Sensor Shield V5 Expansion Board For Arduino
₹65.00₹75.00 -
2mm x 3mm PTFE Teflon Tube
2mm * 3mm PTFE Teflon Tube has 2mm inner diameter and 3mm outer diameter. PTFE Tube to is used to get the best printing performance out of your 3D Printer. It increases print quality, reduces filament jams, and improves retraction.
₹52.00₹65.002mm x 3mm PTFE Teflon Tube
₹52.00₹65.00 -
4A DC-DC Step-down Adjustable Constant Voltage Module
. High-power LED driver.
2. Lithium battery(or lead accumulator) charge.
3. Vehicle-mounted power supply.
4. Low voltage system power supply.
5. 6V, 12V, 14V, 24V battery charge.
6. On-board laptop power supply.
7. Regulated power supply.
8.Low voltage power supply system₹220.00₹245.004A DC-DC Step-down Adjustable Constant Voltage Module
₹220.00₹245.00
