-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
7432 Quad OR Logic Gate IC
- 4 OR gates in a 14-Pin DIP Package
- QUAD 2-INPUT POSITIVE OR GATE
- Outputs Directly Interface to CMOS, NMOS and TTL
- Voltage Rating: 2.0 to 6.0V
- Schmitt Trigger Action at All Inputs
₹12.00 (excl. GST)7432 Quad OR Logic Gate IC
₹12.00 (excl. GST) -
7404 NOT Logic Gate IC
- IC 74LS04 can deliver -0.4 mA current when the output is high.
- It can deliver 16 mA current when the output is low.
- When the Vcc is 5V and the input signal is 5V then the IC draws 1 mA current.
- When the Vcc is 5V and the input signal is 2.7V then the IC draws 20 to 40 micro-ampere currents.
- When the Vcc is 5V and the input signal is 0.4V then the IC draws -1.6 mA current.
₹12.00 (excl. GST)7404 NOT Logic Gate IC
₹12.00 (excl. GST) -
SW420 Tilt Ball switch 2801 ball sensor
- Operating voltage: 5V
- Contact Resistance:Â < 10 Ohms
- Trigger Angle: 15°
- Pins have no polarity
- This series of products is a ball sensor switch, up and down, or. Tilt over 15 degrees is conductive
- The series switch is normally open at rest (OFF) state, when the external force to achieve the corresponding flip, or at a proper angle of tilt, trigger switch.
- The trigger sensitivity of the inductive switch is very high
- Fully sealed package, waterproof, dustproof.
₹10.00 (excl. GST)SW420 Tilt Ball switch 2801 ball sensor
₹10.00 (excl. GST) -
Rain Drop Detection Sensor Module
Features:
Operating voltage: 5V
Provide both digital and analog output
Adjustable sensitivity
Output LED indicator
Compatible with Arduino, Raspberry and other projects
TTL Compatible
Bolt holes for easy installation₹32.00₹50.00(excl. GST)Rain Drop Detection Sensor Module
₹32.00₹50.00(excl. GST) -
10K Ohm Carbon Film Resistor-pack of 50 pcs
- Resistance Value: 10k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 2.2 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (excl. GST)10K Ohm Carbon Film Resistor-pack of 50 pcs
₹50.00 (excl. GST) -
220 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 220 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 220 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹25.00 (excl. GST)220 Ohm Carbon Film Resistor- Pack of 50 pcs
₹25.00 (excl. GST) -
3296W 1k Ohm Trimpot Trimmer Potentiometer
SpecificationÂ
- Series: 3296
- Resistance Tolerance : 10%
- Mounting Style: PCB Mount
- Adjustment: Top Slot
- Number of Turns: Multiturn
₹12.00 (excl. GST)3296W 1k Ohm Trimpot Trimmer Potentiometer
₹12.00 (excl. GST) -
Multicolor Flat Ribbon Cable, 20 Wire per 1 meter
Features :
- Easily and directly inserted into PCB.
- Suitable for internal wiring in office equipment, audio, and video machines.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Useful for the electronic project and Genuine Arduino product.
₹44.00₹55.00(excl. GST)Multicolor Flat Ribbon Cable, 20 Wire per 1 meter
₹44.00₹55.00(excl. GST) -
Ceramic Cement Power Resistors 5W Watt 10K Ohm 5% (Pack of 5)
- Product Name : Cement Resistor;
- Body Material : Ceramic, Cement
- Power : 5W;Resistance : 10KÃŽ
- Tolerance : ±5% (J);
- Body Size (Approx.) : 22 x 9 x 10mm/0.86″ x 0.35″ x 0.39″ (L * W * H)
- Lead Diameter (Approx.) : 0.8mm / 0.031″;Color : White
₹30.00 (excl. GST)Ceramic Cement Power Resistors 5W Watt 10K Ohm 5% (Pack of 5)
₹30.00 (excl. GST) -
₹10.00 (excl. GST)
100E 10W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (excl. GST) -
BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Operating Pressure: 300 hPa to 1100 hPa
- Peak current: 1.12mA
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹40.00 (excl. GST)BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
₹40.00 (excl. GST) -
Soldering Tip- Chisel (Pack of 5)
- ✅ Soldering Bit Material: Copper
- ✅Soldering Bit Type: Lead-free
- ✅ Soldering Bit Temperature Range: 200-480°
- ✅ Soldering Bit Shape: 5Pcs/Package (I+B+K+2.4D+3C)
- ✅ Soldering Bit Suitable for: soldering station
₹320.00 (excl. GST)Soldering Tip- Chisel (Pack of 5)
₹320.00 (excl. GST)
