-
202 Pot Potentiometer Trimmer Resistor- 2K Ohm 0.15W -(Pack of-2)
202 Pot
- Type: RM065 2k
- Resistance: 2K ohm
- Tolerance: +10%
- Operating Temperature Range: -10℃ to +70℃
- Mounting Type: Through Hole
- Length (mm): 7
- Width (mm): 6.5
- Height (mm): 5
- This potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver.
₹30.00 (excl. GST)202 Pot Potentiometer Trimmer Resistor- 2K Ohm 0.15W -(Pack of-2)
₹30.00 (excl. GST) -
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
HX711
Specifications and Features :
- Recommended excitation voltage: 5-10V.
- Two selectable differential input channels.
- On-chip active low noise PGA with a selectable gain of 32, 64 and 128.
- On-chip power supply regulator for load-cell and ADC analogue power supply.
- Selectable 10SPS or 80SPS output data rate.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Simple digital control and serial interface: pin-driven controls, no programming needed.
- Simultaneous 50 and 60Hz supply rejection.
₹31.00 (excl. GST)HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
₹31.00 (excl. GST) -
Rain Drop Detection Sensor Module
Features:
Operating voltage: 5V
Provide both digital and analog output
Adjustable sensitivity
Output LED indicator
Compatible with Arduino, Raspberry and other projects
TTL Compatible
Bolt holes for easy installation₹32.00₹50.00(excl. GST)Rain Drop Detection Sensor Module
₹32.00₹50.00(excl. GST) -
Soil Moisture Sensor Module
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
₹32.00₹45.00(excl. GST)Soil Moisture Sensor Module
₹32.00₹45.00(excl. GST) -
BMP180 Barometric Pressure Altitude Sensor I2C/SPI Module
Specifications and Features :
- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Enhancement of GPS navigation (e.g. time-to first-fix improvement, dead-reckoning, slope detection)
- Indoor navigation (floor detection, elevator detection)
- Outdoor navigation, leisure and sports applications
- Weather forecast
- Health care applications (e.g. spirometry)
- Vertical velocity indication (e.g. rise/sink speed)
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Peak current: 1.12mA
- Operating Pressure: 300 hPa to 1100 hPa
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹32.00 (excl. GST)BMP180 Barometric Pressure Altitude Sensor I2C/SPI Module
₹32.00 (excl. GST) -
High Current Active Alarm Buzzer Driver Module
- Operating voltage 3.3V-5V
- PCB Dimension: 3.1cm*1.3cm.
- Color: Blue
- Easy to use
₹32.00 (excl. GST)High Current Active Alarm Buzzer Driver Module
₹32.00 (excl. GST) -
M274 360 Degree Rotary Encoder Brick Sensor Module
M274 360 Degree Rotary Encoder
- Model : KY-040.
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
- Weight : 10 gm.
₹32.00 (excl. GST)M274 360 Degree Rotary Encoder Brick Sensor Module
₹32.00 (excl. GST) -
74HC151 8-Input Multiplexer IC (74151 IC) DIP-16 Package
74HC151 8-Input Multiplexer IC
- C Name: 74HC151
- Package/Case: DIP-16
₹32.00 (excl. GST)74HC151 8-Input Multiplexer IC (74151 IC) DIP-16 Package
₹32.00 (excl. GST) -
10mm LDR Sensor Photoresistor Photo Cell 50-100k – GL10539
Feature:
- Epoxy encapsulation
- Good reliability
- Small size
- High sensitivity
- Fast response
- Good spectral characteristics
₹33.00 (excl. GST)10mm LDR Sensor Photoresistor Photo Cell 50-100k – GL10539
₹33.00 (excl. GST) -
DC Straight BO Motor for Smart Car Robot
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
₹34.00 – ₹42.00 (excl. GST)DC Straight BO Motor for Smart Car Robot
₹34.00 – ₹42.00 (excl. GST) -
1 Channel 5V Relay Module
- There is a normally open and one normally closed contact.
- The control DC or AC signal, you can control 220V AC load.
- Blue KF301 terminals to the control line is more convenient.
- With the power supply and relay instructions, pull off, disconnect does not shine.
- The module complies with international safety standards, the control area and the load region isolation trench.
₹35.00 (excl. GST)1 Channel 5V Relay Module
₹35.00 (excl. GST) -
1 Channel 12V Relay Module
- The relay high-level pull-in, the module contains current-limiting resistance, a high level can be DC +, microcontroller I / O port can be set high;
- Fault-tolerant design, even if the control line is broken, the relay will not move;
- Power indicator (red), 1 relay status indicator (blue)
- User-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient
- With four fixing bolt holes, easy to install
₹35.00 (excl. GST)1 Channel 12V Relay Module
₹35.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale