No products in the cart.
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
Multicolor Flat Ribbon Cable, 20 Wire per 1 meter
Features :
- Easily and directly inserted into PCB.
- Suitable for internal wiring in office equipment, audio, and video machines.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Useful for the electronic project and Genuine Arduino product.
₹44.00₹55.00(Price is Exclusive of GST)Multicolor Flat Ribbon Cable, 20 Wire per 1 meter
₹44.00₹55.00(Price is Exclusive of GST)Ceramic Cement Power Resistors 5W Watt 10K Ohm 5% (Pack of 5)
- Product Name : Cement Resistor;
- Body Material : Ceramic, Cement
- Power : 5W;Resistance : 10KÎ
- Tolerance : ±5% (J);
- Body Size (Approx.) : 22 x 9 x 10mm/0.86″ x 0.35″ x 0.39″ (L * W * H)
- Lead Diameter (Approx.) : 0.8mm / 0.031″;Color : White
₹30.00 (Price is Exclusive of GST)Ceramic Cement Power Resistors 5W Watt 10K Ohm 5% (Pack of 5)
₹30.00 (Price is Exclusive of GST)- ₹10.00 (Price is Exclusive of GST)
100E 10W 5% Axial Lead Ceramic Encased White Wire Wound Resistors
₹10.00 (Price is Exclusive of GST) 
BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Operating Pressure: 300 hPa to 1100 hPa
- Peak current: 1.12mA
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹40.00 (Price is Exclusive of GST)BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
₹40.00 (Price is Exclusive of GST)Soldering Tip- Chisel (Pack of 5)
- ✅ Soldering Bit Material: Copper
- ✅Soldering Bit Type: Lead-free
- ✅ Soldering Bit Temperature Range: 200-480°
- ✅ Soldering Bit Shape: 5Pcs/Package (I+B+K+2.4D+3C)
- ✅ Soldering Bit Suitable for: soldering station
₹320.00 (Price is Exclusive of GST)Soldering Tip- Chisel (Pack of 5)
₹320.00 (Price is Exclusive of GST)4 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
₹140.00 (Price is Exclusive of GST)4 Channel 12V Relay Module with Optocoupler
₹140.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)2 Channel 5V Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
₹65.00 (Price is Exclusive of GST)2 Channel 5V Relay Module with Optocoupler
₹65.00 (Price is Exclusive of GST)HC-05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
₹170.00₹275.00(Price is Exclusive of GST)HC-05 Bluetooth Module
₹170.00₹275.00(Price is Exclusive of GST)Metal Robot Chassis for 4WD Robo Car
- Metal Body
- Available in two color red & grey
- Many perforated holes have given for easy attachment of the development board and sensors
- Center Shaft gear motor and side shaft gear motor can be used for this chassis.
₹85.00 (Price is Exclusive of GST)Metal Robot Chassis for 4WD Robo Car
₹85.00 (Price is Exclusive of GST)Metal Robot Chassis for 2WD Robo Car
- Drive: 2WD
- Frame:1.5mm aluminum alloy structure, lightweight and high strength
- Working voltage: 4.5~6v
- Lightweight
- Low-cost
- High strength
- Material: Aluminum
₹70.00₹85.00(Price is Exclusive of GST)Metal Robot Chassis for 2WD Robo Car
₹70.00₹85.00(Price is Exclusive of GST)4WD Smart Robot Car Acrylic Chassis Kit
Features:
Very handy and simple in assembling/disassembling.
Strong components to withstand extreme terrain conditions.
Transparent Car Acrylic Chassis.
Attractive design.₹450.00 (Price is Exclusive of GST)4WD Smart Robot Car Acrylic Chassis Kit
₹450.00 (Price is Exclusive of GST)
