-
₹118.00 (Price is Exclusive of GST)
Lm75A Temperature Sensor Development Board Module I2C Interface Hi-Q
₹118.00 (Price is Exclusive of GST) -
4 Channel 12V Relay Module with Optocoupler
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
₹150.00 (Price is Exclusive of GST)4 Channel 12V Relay Module with Optocoupler
₹150.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
2 Channel 5V Relay Module
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
₹65.00 (Price is Exclusive of GST)2 Channel 5V Relay Module
₹65.00 (Price is Exclusive of GST) -
XBEE S2C 802.15.4 RF Modules
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
₹4,071.00 (Price is Exclusive of GST)XBEE S2C 802.15.4 RF Modules
₹4,071.00 (Price is Exclusive of GST) -
HC-05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
₹150.00 (Price is Exclusive of GST)HC-05 Bluetooth Module
₹150.00 (Price is Exclusive of GST) -
Metal Robot Chassis for 4WD Robo Car
- Â Metal Body
- Available in two color red & grey
- Many perforated holes have given for easy attachment of the development board and sensors
- Center Shaft gear motor and side shaft gear motor can be used for this chassis.
₹85.00 (Price is Exclusive of GST)Metal Robot Chassis for 4WD Robo Car
₹85.00 (Price is Exclusive of GST) -
Metal Robot Chassis for 2WD Robo Car
- Drive: 2WD
- Frame:1.5mm aluminum alloy structure, lightweight and high strength
- Working voltage: 4.5~6v
- Lightweight
- Low-cost
- High strength
- Material: Aluminum
₹70.00₹85.00(Price is Exclusive of GST)Metal Robot Chassis for 2WD Robo Car
₹70.00₹85.00(Price is Exclusive of GST) -
4WD Smart Robot Car Acrylic Chassis Kit
Features:
Very handy and simple in assembling/disassembling.
Strong components to withstand extreme terrain conditions.
Transparent Car Acrylic Chassis.
Attractive design.₹690.00 (Price is Exclusive of GST)4WD Smart Robot Car Acrylic Chassis Kit
₹690.00 (Price is Exclusive of GST) -
L293D Motor Driver Shield Expansion Board
- Drive 4 DC motors with speed and direction control
- Drive 2 stepper motors
- Drive 2 servo motors
- 4.5 – 25V motor voltage range
- 1.2A peak current per channel (600mA continuous)
₹125.00 (Price is Exclusive of GST)L293D Motor Driver Shield Expansion Board
₹125.00 (Price is Exclusive of GST) -
I2C Serial Interface Adapter Module
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
₹35.00 (Price is Exclusive of GST)I2C Serial Interface Adapter Module
₹35.00 (Price is Exclusive of GST) -
0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
Features of 4 pin 128 x 64 OLED Display
- Â Â Â Super High Brightness (Adjustable)
- Â Â Â Super High Contrast (Adjustable)
- Â Â Â Embedded Driver/Controller
-    Display size: 0.96″
- Â Â Â Resolution radio:128 x 64
- Â Â Â Interface modes: I2C/IIC
- Â Â Â working voltage: 3.3V
- Â Â Â Control Chip: SSD1306
₹165.00 (Price is Exclusive of GST)0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
₹165.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
