• Nova PM Sensor SDS011 High Precision Laser pm 2.5 Air Quality Detection Sensor

    Features:

    1. Accurate and Reliable: laser detection, stable, good consistency.
    2. Quick response: response time is less than 10 seconds when the scene changes.
    3. Easy integration: UART output (or IO output can be customized), fan built-in.
    4. High resolution: the resolution of 0.3ug/m3.
    2,078.00 (excl. GST)
  • SeeedStudio Grove Ultrasonic Ranger

    Comparison with HC-SR04

    You might wonder why there is a need for this sensor when ultrasonic module HC-SR04 is already available in the market. The comparison of Grove Ultrasonic Ranger and traditional ultrasonic module HC-SR04 is as follows:

    1. The Grove – Ultrasonic Distance Sensor integrates a single-chip microcomputer, and the transmitting signal and the receiving signal share one pin by Time Division Multiplexing (TDM), so only one I/O pin is occupied. The HC-SR04 Ultrasonic (US) sensor comes with a 4 pin interface named VCC, Trig (signal output pin), Echo (signal input pin), and GND.
    2. Grove – Ultrasonic Distance Sensor module supports 3.3V as well as 5 V, but HC-SR04 only supports 5v voltage. As we know, the Raspberry pi I/O only supports 3.3v. Therefore, Grove Ultrasonic Ranger Sensor can be directly connected to the I/O of the Raspberry Pi, but HC-SR04 needs to use a voltage conversion circuit. The image of both the modules is as given below.

    Features:

    1. Output: PWM
    2. 3.3 V / 5 V compatible
    3. Wide voltage level: 3.2 V~5.2 V
    4. Only 3 pins needed, so saves I/O resources
    5. Wide measurement range: 3 cm ~ 350 cm
    6. Easy to use: Just plug-and-play
    334.00 (excl. GST)
  • FRC connector female 40 pin (Pack of 2)

    • Features/Specs:

      • Gender: Female
      • Connector Type: IDC
      • Number Of Contacts: 40
      • Number Of Rows: 2
      • Pitch: 2.54mm
      • Current Rating: 2A
      • Mounting Type: Cable Mount
      • Contact Material: Phosphor Bronze
      • Minimum Operating Temperature: -65°C
      • Maximum Operating Temperature: +105°C
      • Housing Material: Thermoplastic
      • Contact Plating: Nickel-plated terminals
      • Color: Black
    14.00 (excl. GST)
  • FRC connector male 40 pin (Pack of 2)

    • Features/Specs:

      • 40 Pin Box Header Male Straight
      • Arrangement: 20 x 2 pins
      • Pitch: 2.54 mm
      • Current Rating: 3 A max
      • Working Voltage: 250V AC
      • Gender: Male
      • Connector Type: IDC
      • Current Rating: 3A
      • Insulation Resistance: 1000MΩ MIN
      • Contact Impedance: 15mΩ MAX
      • Mounting Type: PCB Mount
      • Contact Material: Phosphor Bronze
      • Operating Temperature: -25°C ~ +105°C
      • Housing Material: Thermoplastic
      • Contact Plating: Nickel-plated terminals
      • Color: Black
    14.00 (excl. GST)
  • FRC connector male 8 pin (Pack of 2)

    • Features/Specs:

      • Gender: Female
      • Connector Type: IDC
      • Current Rating: 2A
      • Mounting Type: Cable Mount
      • Number Of Contacts: 8
      • Number Of Rows: 2
      • Pitch: 2.54mm
      • Contact Material: Phosphor Bronze
      • Minimum Operating Temperature: -65°C
      • Maximum Operating Temperature: +105°C
      • Housing Material: Thermoplastic
      • Contact Plating: Nickel-plated terminals
      • Color: Black
    22.00 (excl. GST)
  • FRC connector Female 8 pin (Pack of 2)

    • Features/Specs:

      • Gender: Female
      • Connector Type: IDC
      • Current Rating: 2A
      • Mounting Type: Cable Mount
      • Number Of Contacts: 8
      • Number Of Rows: 2
      • Pitch: 2.54mm
      • Contact Material: Phosphor Bronze
      • Minimum Operating Temperature: -65°C
      • Maximum Operating Temperature: +105°C
      • Housing Material: Thermoplastic
      • Contact Plating: Nickel-plated terminals
      • Color: Black
    22.00 (excl. GST)
  • FRC connector Male (Pack of 2) 16 Pin

    • 16 Pin Box Header Male Straight
    • Arrangement: 8 x 2 pins
    • Pitch: 2.54 mm
    • Current Rating: 3 A max
    • Working Voltage: 250V AC
    8.00 (excl. GST)
  • FRC connector Female 16 pin (Pack of 2)

    • Gender: Female; Connector Type: IDC; Current Rating: 2A
    • Mounting Type: Cable Mount; Number Of Contacts: 16; Number Of Rows: 2; Pitch: 2.54mm
    • Contact Material: Phosphor Bronze; Housing Material: Thermoplastic
    • Contact Plating: Nickel-plated terminals; Color: Black
    • Minimum Operating Temperature: -65°C; Maximum Operating Temperature: +105°C
    8.00 (excl. GST)
  • 5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)

    Features of Prusa i3 Desktop 3D Printer DIY Kit

    1. 3D flatbed printer.
    2. Acrylic Plate, more stable and durable.
    3. Support ABS, PLA, PVA, WOOD, and NYLON easy to use.
    4. Support SD card with LCD for off-line printing (Included with the printer).
    5. Support Bowden extruder.
    6. Can be used for printing different items like small components model, decoration etc.
    7. Special printing software, transfer the STL file to print file.
    8. Special frame design for you to see the printing process clearly.
    9. Can make true-to-life and high-resolution models and objects.
    10. Quiet while working.
    11. Max heated bed temperature about 110°C(adjustable).
    12. Max extruder temperature about 240°C.
    19,371.00 (excl. GST)
  • Original Prusa Mini+ 3D Printer Kit

    Features:

    1. Silent Trinamic 2209 stepper drivers
    2. 3 thermistors, fan RPM sensors
    3. A Bowden system with3:1 gearing
    4. Super PINDA probe – no temperature drift
    5. Fast preheat: PLA 1 min / ASA 3 min
    6. Sensor less homing for X and Y axes
    7. 2.8″ graphic 65k color screen with G-Code preview
    8. Prusament PLA sample weight: ~2×25 g
    58,644.00 (excl. GST)

    Original Prusa Mini+ 3D Printer Kit

    58,644.00 (excl. GST)
  • Original Prusa MK3S+ 3D Printer Kit

     Features:

    1. Adapted to fit Prusa’s new filament sensor;
    2. Includes one Bondtech BMG extruder with a 3:1 gearing ratio;
    3. Optimized geometry for heat-sink cooling;
    4. Less moving weight to reduce vibration and ghosting;
    5. Professional SLS 3D printed housing.
    73,830.00 (excl. GST)

    Original Prusa MK3S+ 3D Printer Kit

    73,830.00 (excl. GST)
  • Original Prusa SL1S Speed 3D Printer

    For Newcomers and Professionals

    The Prusa SL1S Speed 3D Printer is more than just a machine for producing figures and statues. With professional-level print quality, extensive documentation, low running costs and 24/7 tech support, the SL1S is perfect for newcomers and professionals alike. Its predecessor, the SL1, already found its way to hospitals and industrial companies.

    High-Quality Materials and Rigid Body

    We have built the Original Prusa SL1S Speed 3D Printer around a rigid, heavy aluminum body, which minimizes vibrations and ensures the best possible printing performance even when printing thin and highly detailed geometry. The SL1S features a quick-release mechanism, which maintains the Z-axis calibration.

    Smart Resin Tank

    The new tank from high-quality graphite-reinforced PA6 composite comes with a practical opaque lid that protects the resin from being cured by daylight. Automatic Resin Sensor prevents resin from overflowing or running out mid-print.

    Slice with PrusaSlicer

    The Prusa SL1S Speed 3D Printer is fully supported in the latest releases of PrusaSlicer, our internally developed and regularly updated slicing software. Take advantage of hollowing, automatic support generation, easy object manipulation and many other tools. PrusaSlicer also contains factory-tested profiles for dozens of resins.

    Features:

    1. Quick-release platform – maintains calibration. No need to recalibrate the printer when the platform with the print is removed.
    2. Assisted Wizard with quick and easy setup and calibration
    3. Motorized tilting bed – prevents layer shifts, stirs the resin, enables faster printing, improves reliability
    4. Resin tank with non-proprietary FEP films – easy and cheap replacement, low running costs
    5. Silent operation with Trinamic drivers (auto-homing function)
    6. Advanced LCD cooling system improves performance and extends the life of internal components
    7. Rear fan with a carbon filter to minimize odors around the printer
    8. Safety features: resin level sensor, safety vat under the tilt mechanism to protect the internal parts against minor resin spills
    9. Fully-featured network interface: Control your printer through your web browser.
    186,505.00 (excl. GST)

    Original Prusa SL1S Speed 3D Printer

    186,505.00 (excl. GST)

Main Menu