-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
SW-420 Vibration Sensor Module
- Using SW-420 normally closed type vibration sensor.
- Comparator output, clean signal, good waveform, strong driving ability, >15mA.
- Using a wide voltage LM393 comparator.
- With bolt holes for easy installation.
₹45.00 -
Metal Touch Sensor Module
Features:
Working voltage: DC 5V
Low level output signal used for human body touch sensor alarm
Adjustable sensitivity
Single channel signal output
With fixed bolt hole for easy installation₹40.00₹55.00Metal Touch Sensor Module
₹40.00₹55.00 -
GY-521 ADXL335 Module 3-axis Analog Output Accelerometer
Features :
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build-in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
- Designed for 5V logic level
₹115.00 -
MQ2 Flammable Gas and Smoke Sensor Module
Specifications:-
- Power Supply: 5 Volts
- Interface Type: Analog & Digital
- High Sensitivity to Smoke & combustible gasses like Hydrogen, LPG & Propane.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
₹88.00 -
33 Ohm Carbon Film Resistor-Pack of 50 pcs
- Resistance Value: 33 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 33 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 -
0.96 Inch I2C/IIC 4pin OLED Display Module BLUE
Features of 4 pin 128 x 64 OLED Display
- Â Â Â Super High Brightness (Adjustable)
- Â Â Â Super High Contrast (Adjustable)
- Â Â Â Embedded Driver/Controller
-    Display size: 0.96″
- Â Â Â Resolution radio:128 x 64
- Â Â Â Interface modes: I2C/IIC
- Â Â Â working voltage: 3.3V
- Â Â Â Control Chip: SSD1306
₹165.00 -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-White
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 -
PCB Drill bit
Drill bit Applications:
- Drilling PCBs
- Drilling ornaments
- Drilling thin Aluminium plates
Drill bit specification:
- 0.8mm diameter
- High quality stainless steel
- Long term durability
- Good for though surfaces
₹12.00PCB Drill bit
₹12.00 -
Arduino UNO SMD Atmega328P Development Board
Features-
- Flash Memory – 32 KB (ATmega32u4) of which 4 KB used by boot loader
- SRAM – 2 KB (ATmega328P)
- EEPROM – 1 KB (ATmega328P)
₹290.00₹550.00Arduino UNO SMD Atmega328P Development Board
₹290.00₹550.00 -
MAX30102 Pulse Oximeter Heart Rate Sensor Module
 FeaturesHeart-Rate Monitor and Pulse Oximeter Biosensor in LED Reflective SolutionIntegrated Cover Glass for Optimal, Robust PerformanceUltra-Low Power Operation for Mobile DevicesProgrammable Sample Rate and LED Current for Power SavingsLow-Power Heart-Rate Monitor (< 1mW)Ultra-Low Shutdown Current (0.7µA, typ)Fast Data Output CapabilityHigh Sample RatesRobust Motion Artifact ResilienceHigh SNR₹159.00 -
XT90 Female Connector with Housing (1pcs)
Features:
- Plug Type: 5mm gold bullet connector in nylon shroud
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹38.00 -
PL2303-PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
Features of PL2303 USB to TTL USB Converter Module:-
- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
- Excellent driver support–drivers are available for Windows 98 to Windows 7 (32 bit and 64 bit), Mac OS 8 to OS X (32 bit and 64 bit) and Linux. Even Android is supported.
₹65.00
