-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹638.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹638.00(Price is Exclusive of GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹264.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹264.00 (Price is Exclusive of GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
-
Ninja Robot Kit (Otto Bot) for Robotics Project
- Part Reference: Otto DIY Bot
- Application: For Robotics Learning
- Color: Varies and not constant as per image
- Structure Type: 3D Printed
₹1,340.00 (Price is Exclusive of GST)Ninja Robot Kit (Otto Bot) for Robotics Project
₹1,340.00 (Price is Exclusive of GST) -
Aluminum Electrolytic Capacitor Assorted Kit – 12 Kinds 0.22-F-470-F
Features:
1.Made of high-quality material, durable, and practical to use.
2.Durable and easy to install.
3.Very convenient and practical.
4.Very popular with electronics enthusiasts.
5.A variety of types of electrolytic capacitors to meet your different needs.₹200.00 (Price is Exclusive of GST)Aluminum Electrolytic Capacitor Assorted Kit – 12 Kinds 0.22-F-470-F
₹200.00 (Price is Exclusive of GST) -
Orange 2200mAh Lithium Polymer Battery Pack 1S 25C/50C (3.7V)
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
Precautions :
- Avoid over-charging or over-discharge batteries
- Do not put it besides the high-temperature condition
- Don’t directly expose it into the fire
- Avoid the contact of water.
- Do not Short Circuit the battery Terminals
₹755.00 (Price is Exclusive of GST)Orange 2200mAh Lithium Polymer Battery Pack 1S 25C/50C (3.7V)
₹755.00 (Price is Exclusive of GST) -
Power Adaptor Dual Pin 12 Volt 1 Amps
- Stabilized Output, low ripple & low interference Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Plug Type – 2 Pin
- 5.5mm DC Pin & 4.00mm Pin Combo
- Power supply for LED, SMD, LED strip, RGB LED strip
- Color as show on picture. Package includes 1 item.
₹149.00 (Price is Exclusive of GST)Power Adaptor Dual Pin 12 Volt 1 Amps
₹149.00 (Price is Exclusive of GST) -
1 Channel 12V Relay Module with Optocoupler
- Maximum Voltage: 5V
- Maximum Current: 10A
- Operating Temperature: -40 to 85°C
- Contact Load: Low Power
- Power Source: DC
- LED Indication of Relay ON
₹39.00 (Price is Exclusive of GST)1 Channel 12V Relay Module with Optocoupler
₹39.00 (Price is Exclusive of GST) -
Soldering Iron Stand
- Heavy-duty base to uphold the weight of Soldering iron 25W or lesser
- Nickel-plated spring holder
- Spring holder provides substantial room for holding the soldering iron support
₹55.00 (Price is Exclusive of GST)Soldering Iron Stand
₹55.00 (Price is Exclusive of GST) -
₹600.00 (Price is Exclusive of GST)4-Axis Multi-Rotor Quadcopter Frame – F450
₹600.00 (Price is Exclusive of GST) -
High Sensitivity Sound Sensor Module
- Main chip: LM393, Electret condenser microphone
- Working voltage:Â DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
.
₹35.00₹40.00(Price is Exclusive of GST)High Sensitivity Sound Sensor Module
₹35.00₹40.00(Price is Exclusive of GST) -
12 Volt LED Light Strips Aluminum for Holiday/Home/Party/Indoor/Outdoor Decoration
12 Volt LED Light Strips
- Very suitable for indoor outdoor lighting and decor
- the working voltage is 12V
- Super bright and Safe to use
- It is touchable
- Every 1-LED cuttable without damaging the rest strip, to help you meet different size need
₹140.00 (Price is Exclusive of GST)12 Volt LED Light Strips Aluminum for Holiday/Home/Party/Indoor/Outdoor Decoration
₹140.00 (Price is Exclusive of GST) -
₹15.00 (Price is Exclusive of GST)6K8 Wire Wound Resistor 10W ±5%
₹15.00 (Price is Exclusive of GST) -
Orange A Grade10Ah Prismatic LiFePO4 Battery-3.2V
Features:
- Safest Lithium Chemistry.
- High specific energy and High capacity.
- Long Life Cycles and extended shelf life.
- High capacity, low internal resistance, good coulombic efficiency.
- The orange team takes a great effort to meet projects on time.
₹2,900.00 (Price is Exclusive of GST)Orange A Grade10Ah Prismatic LiFePO4 Battery-3.2V
₹2,900.00 (Price is Exclusive of GST) -
Resistor Kit 150 Pieces 30 Values 1/4W for Electronics DIY
- Carbon film assorted resistors
- 30 values
- Quantity: 150 pieces (5 each)
- Tolerance: 5%
- Power Rating: 0.25 wat
₹150.00 (Price is Exclusive of GST)Resistor Kit 150 Pieces 30 Values 1/4W for Electronics DIY
₹150.00 (Price is Exclusive of GST)
