-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
MFRC-522 RC522 RFID Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card）
₹125.00 (excl. GST)MFRC-522 RC522 RFID Module
₹125.00 (excl. GST) -
Power Adaptor Dual Pin 9 Volt 1 Amps
- AC Input Voltage: 100 ~ 240 V.
- Output Voltage(V): 9.
- Output Current (Amp): 1.
- Rated Frequency (Hz): 50 – 60.
- Cable Length: Approx 1.1m
₹90.00 (excl. GST)Power Adaptor Dual Pin 9 Volt 1 Amps
₹90.00 (excl. GST) -
11.1V 2200mAh Lipo Lithium Polymer Rechargeable Battery
- Lithium-Polymer (Li-Po) Battery For RC, Planes and Drones
- 3 Cell (3S) 11.1V 2200MAH 35C
- Very Small in size and weight
- Connector Plug: XT60 Plug connector
- Discharge Current: 35*2200maH = 77Amp
₹1,500.00 (excl. GST)11.1V 2200mAh Lipo Lithium Polymer Rechargeable Battery
₹1,500.00 (excl. GST) -
ULN2003 Stepper Motor Driver IC
- 500-mA-Rated Collector Current (Single Output)
- High-Voltage Outputs: 50 V
- Output Clamp Diodes
- Inputs Compatible With Various Types of Logic
- Relay-Driver Applications
₹15.00 (excl. GST)ULN2003 Stepper Motor Driver IC
₹15.00 (excl. GST) -
Alligator Clips10pcs of Double-ended Crocodile Clips Roach Clip
- Colour: Red, Green, Yellow, White, and Black, etc.
- Cable length: 45 cm.
- Net weight: 82 gm.
- They are very useful for connecting components to wires.
- It is insulation covered clips connected to the wire from both ends.
₹110.00 (excl. GST)Alligator Clips10pcs of Double-ended Crocodile Clips Roach Clip
₹110.00 (excl. GST) -
Micro SD Card Reader Module
- Features:-
- Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
- The level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
₹65.00 (excl. GST)Micro SD Card Reader Module
₹65.00 (excl. GST) - Features:-
-
Flex Sensor 2.2 inch
It is a bend sensor for hang gesture recognition. It is a type of variable resistor. The technology of this item is based on resistive carbon elements. It detects the gesture through variation in resistance value. Its resistance increases when a body of components bends. Its radius is smaller, so it gives a higher resistance value.
₹245.00 (excl. GST)Flex Sensor 2.2 inch
₹245.00 (excl. GST) -
DHT11 Temperature and Humidity Sensor Module
- DHT11 sensor with PCB and LED indicator; 3 to 5V power and I/O, 4 pins with 0.1″ spacing
- The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
- 2.5mA max current use during conversion (while requesting data)
- Good for 20-80% humidity readings with 5% accuracy
- Good for 0-50°C temperature readings ±2°C accuracy.
₹45.00₹92.00(excl. GST)DHT11 Temperature and Humidity Sensor Module
₹45.00₹92.00(excl. GST) -
330K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 330k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 330 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistor
₹50.00 (excl. GST)330K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (excl. GST) -
100 Ohm Resistor 1/4 Watt- Pack of 50 pcs
- Resistance Value: 100 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 2.2 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (excl. GST)100 Ohm Resistor 1/4 Watt- Pack of 50 pcs
₹50.00 (excl. GST) -
4.7K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 4.7Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 4.7 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (excl. GST)4.7K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (excl. GST) -
2.2K Ohm Carbon Film Resistor-pack of 50 pcs
- Resistance Value: 2.2 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 2.2 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (excl. GST)2.2K Ohm Carbon Film Resistor-pack of 50 pcs
₹50.00 (excl. GST)
