-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
2 Pin Tactile Micro Switch
- High precision mechanism design offers acute operation and long service life.
- Used in the fields of electronic products, household appliances and more.
- Feature momentary contact, 2 pins, round black push button, through hole mounting
- Size: 6 x 6 x 5mm. 2 Pin
₹1.50 -
Expansion Testing Interface Board for Microcontrollers
Features:
Input Output Board for Arduino 8051 AVR Raspberry Pi
8 LEDs and 4 Switches
5V Relay, Buzzer for Output test
TSOP, LDR and LM35D Temperature Sensor for Input Testing
Potentiometer for Varying Sensitivity.₹115.00 -
Infrared IR Transmitter and Receiver (Photo-diode) Pair
Features:
- IR LED (TSFF5210)
- Package type: leaded
- Dimensions : 5mm
- Leads with stand-off
- Peak wavelength: λp = 870 nm
- High reliability
- High radiant power
- High radiant intensity
- Angle of half intensity: = ± 10°
- Low forward voltage
- Suitable for high pulse current operation
- High modulation bandwidth: fc = 24 MHz
- Good spectral matching with Si photodetectors
- IR Photodiode (BPV10NF)
- Package type: leaded
- Dimensions : 5mm
- Leads with stand-off
- Radiant sensitive area (in mm2): 0.78
- High radiant sensitivity
- Daylight blocking filter matched with 870 nm to 890 nm emitters
- High bandwidth: > 100 MHz at VR = 12 V
- Fast response times
- Angle of half sensitivity: ± 20°
₹10.00 - IR LED (TSFF5210)
-
1X40 Right Angle Female Header Berg Strip
- Connector: Pin Header
- Connector type: Pin Strips female
- Number of pins: 40
- Pin Length: 12mm.
- Pitch: 2.54mm.
₹6.00₹7.001X40 Right Angle Female Header Berg Strip
₹6.00₹7.00 -
Photosensitive Light Sensor ( LDR Sensor Board)
- Operating voltage 3.3V-5V
- Signal output indicator light
- Able to detect ambient brightness and light intensity Adjustable sensitivity
₹18.00₹35.00Photosensitive Light Sensor ( LDR Sensor Board)
₹18.00₹35.00 -
Potentiometer Shaft Rotary Volume Metallic 3 Pin
- Resistance: 1k Ω, 5kΩ, 10kΩ, 22kΩ, 47kΩ, 100kΩ, 470kΩ
- Tolerance: 20%.
- Shaft Length: 15mm.
₹18.00 -
RFID 13.56MHz Card (Pack of 5)
Features:
- Contactless transmission of data and supply energy (no battery needed)
- Anticollision
- EEPROM
- 1Kbit, organized in 16 sectors, each district two passwords
- User definable access conditions for each memory block
- Data retention of 10 years.
- Write endurance 100 000 cycles
- Security
- Individual key set per sector (per application) to support multi-application with key hierarchy
- A unique serial number for each device
- Transport key protects access to EEPROM on-chip delivery
₹60.00 -
9V Watt Battery
- Constant 9V Output till lasts.
- Metal Jacket Body.
- Easy to install and Replace
- Pack of 2 Battery.
₹18.009V Watt Battery
₹18.00 -
Single 1×40 Row Male Breakable Pin Header Connector Berg Strip – 1 Piece
- Can be manually broken for the length needed.
- Connector: Pin Header
- Connector type: Pin Strips Male
- Number of pins: 40
- Right angled male berg strip.
₹2.50₹4.00 -
₹45.00
₹60.00Jumper Wire Male to Female 20 cm (Set of 40 Piece)
₹45.00₹60.00
