No products in the cart.
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)
11.1V 2200mAh Lipo Lithium Polymer Rechargeable Battery
- Lithium-Polymer (Li-Po) Battery For RC, Planes and Drones
- 3 Cell (3S) 11.1V 2200MAH 35C
- Very Small in size and weight
- Connector Plug: XT60 Plug connector
- Discharge Current: 35*2200maH = 77Amp
₹1,500.00 (Price is Exclusive of GST)11.1V 2200mAh Lipo Lithium Polymer Rechargeable Battery
₹1,500.00 (Price is Exclusive of GST)Alligator Clips10pcs of Double-ended Crocodile Clips Roach Clip
- Colour: Red, Green, Yellow, White, and Black, etc.
- Cable length: 45 cm.
- Net weight: 82 gm.
- They are very useful for connecting components to wires.
- It is insulation covered clips connected to the wire from both ends.
₹110.00 (Price is Exclusive of GST)Alligator Clips10pcs of Double-ended Crocodile Clips Roach Clip
₹110.00 (Price is Exclusive of GST)Micro SD Card Reader Module
- Features:-
- Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
- The level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
₹65.00 (Price is Exclusive of GST)Micro SD Card Reader Module
₹65.00 (Price is Exclusive of GST)- Features:-
Flex Sensor 2.2 inch
It is a bend sensor for hang gesture recognition. It is a type of variable resistor. The technology of this item is based on resistive carbon elements. It detects the gesture through variation in resistance value. Its resistance increases when a body of components bends. Its radius is smaller, so it gives a higher resistance value.
₹245.00 (Price is Exclusive of GST)Flex Sensor 2.2 inch
₹245.00 (Price is Exclusive of GST)DHT11 Temperature and Humidity Sensor Module
- DHT11 sensor with PCB and LED indicator; 3 to 5V power and I/O, 4 pins with 0.1″ spacing
- The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
- 2.5mA max current use during conversion (while requesting data)
- Good for 20-80% humidity readings with 5% accuracy
- Good for 0-50°C temperature readings ±2°C accuracy.
₹45.00₹92.00(Price is Exclusive of GST)DHT11 Temperature and Humidity Sensor Module
₹45.00₹92.00(Price is Exclusive of GST)ACS712 – 30A Range Current Sensor Module
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
₹150.00 (Price is Exclusive of GST)ACS712 – 30A Range Current Sensor Module
₹150.00 (Price is Exclusive of GST)330K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 330k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 330 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistor
₹50.00 (Price is Exclusive of GST)330K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)100 Ohm Resistor 1/4 Watt- Pack of 50 pcs
- Resistance Value: 100 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 2.2 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (Price is Exclusive of GST)100 Ohm Resistor 1/4 Watt- Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)4.7K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 4.7Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 4.7 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (Price is Exclusive of GST)4.7K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)2.2K Ohm Carbon Film Resistor-pack of 50 pcs
- Resistance Value: 2.2 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 2.2 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors)
₹50.00 (Price is Exclusive of GST)2.2K Ohm Carbon Film Resistor-pack of 50 pcs
₹50.00 (Price is Exclusive of GST)330 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 330 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 330 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (Price is Exclusive of GST)330 Ohm Carbon Film Resistor- Pack of 50 pcs
₹50.00 (Price is Exclusive of GST)100 Ohm Carbon Film Resistor 0.25 Watt – Pack of 50 pcs
- Resistance Value: 100 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 100 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹25.00 (Price is Exclusive of GST)100 Ohm Carbon Film Resistor 0.25 Watt – Pack of 50 pcs
₹25.00 (Price is Exclusive of GST)
