-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Array Network Resistors 10 PIN
- Longer working life
- Reduced maintenance cost
- Convenient operation
₹70.00 (excl. GST)Array Network Resistors 10 PIN
₹70.00 (excl. GST) -
AT89S52-24PU DIP-40 Microcontroller
- Package/Case: DIP-40
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
₹60.00 (excl. GST)AT89S52-24PU DIP-40 Microcontroller
₹60.00 (excl. GST) -
Atal Tinkering Lab ATL Package 1 (Electronics Development, Internet of Things & Sensors, Robotics and DIY Kits)
Atal Tinkering Lab ATL Package 1 containing components for Electronics Development, Internet of Things & Sensors, Robotics and DIY Kits.
₹119,000.00₹155,500.00(excl. GST)Atal Tinkering Lab ATL Package 1 (Electronics Development, Internet of Things & Sensors, Robotics and DIY Kits)
₹119,000.00₹155,500.00(excl. GST) -
ATL Package 2 (3D Printing, Rapid Prototyping and DIY Crafting)
Package 2 is all about Prototyping at ATL. Unleash your design and prototyping skills with this package.
₹21,500.00 (excl. GST)ATL Package 2 (3D Printing, Rapid Prototyping and DIY Crafting)
₹21,500.00 (excl. GST) -
ATL Package 3 (Electronics and Mechanical Prototyping Tools)
The Atal Tinkering Lab (ATL) initiative is aimed at enhancing the Indian Education System. It is converting thoughts to reality, where the young children (max 12 years of age) are being introduced to the world of technological innovation. ATL made to experience totally different microenvironments in Indian schools. This is allowing the children to work around their area of interest without having a fixed syllabus.
₹43,000.00 (excl. GST)ATL Package 3 (Electronics and Mechanical Prototyping Tools)
₹43,000.00 (excl. GST) -
ATL Package 4 (DIY Tinkering and Safety Equipments)
The Atal Tinkering Lab (ATL) initiative is aimed at enhancing the Indian Education System. It is converting thoughts to reality, where the young children (max 12 years of age) are being introduced to the world of technological innovation. ATL made to experience totally different microenvironments in Indian schools. This is allowing the children to work around their area of interest without having a fixed syllabus.
₹7,700.00₹8,500.00(excl. GST)ATL Package 4 (DIY Tinkering and Safety Equipments)
₹7,700.00₹8,500.00(excl. GST) -
ATmega328P Micro-Controller IC
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
₹300.00 (excl. GST)ATmega328P Micro-Controller IC
₹300.00 (excl. GST) -
Auto Hand Sanitizer Dispenser Kit with IR sensor, Relay, Pump, Power Supply and Jumper Wires – V1
The kit Contains:
1 pc IR Sensor
1 pc IR Control Board with Relay port
1 Pc Mini Submersible Pump
1 Pc 12V Adaptor
40 pc Jumper Wire ( Female to Female)₹410.00 (excl. GST) -
Auto Hand Sanitizer Dispenser Kit with Ultrasonic HCSR-04 Sensor Module, Relay, Pump, Power Supply and Jumper Wires – V2
- Best kit for making automatic hand sanitizer dispenser machine.
- Automatic Relay Controller Board
- Easy to use DIY Kit with IR Sensor Module and 9v DC Water Pump
- Use 12v, 2 Ampere Adapter for best result
₹990.00 (excl. GST) -
Automatic Dawn to Dusk Sensor Board with Relay and LDR for Solar Based Street Light
Features:
LDR Based Sensor
On Board 12V Relay to Control Solar street Light
Relay will automatically turn ON in Low lighting Condition and will turn OFF when lighting is adequate
Pefect to control Solar based Garden light or Street light
Works best in open Natural Light Source₹125.00 (excl. GST) -
Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
Features:
Automatic Sensing
8 Liter Tank Capacity
Mist Spray for better output
Easy to Install, just need to plug and use
6 Months Manufacture Warranty
Works under Sunlight₹3,500.00 (excl. GST)Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
₹3,500.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST)
