-
MP3-TF-16P MP3 SD Card Module with Serial Port
Application
- Car navigation voice broadcast
- Road transport inspectors, toll voice prompts
- The train station, bus station voice prompts security check
- Electric power, telecommunications, financial operating room voice prompts
- The vehicle into or out of the channel to verify the voice prompts
- Border control channel voice prompts
- Multi-channel voice alarm or voice guidance equipment operation
- Electric sightseeing bus safety with voice notices
- Electrical and mechanical equipment failure alarm
- Fire alarm voice prompts
- Automatic broadcasting equipment, regular broadcast.
Specifications and Features :
- Supports sampling rates (kHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB.
- Fully supports FAT16, FAT32 file system, maximum support 32G TF card, support U disk to 32G, 64M bytes of NOR FLASH.
- A variety of control modes are available. IO control mode, serial mode, AD key control mode.
- The broadcast language spots feature, you can pause the background music being played. Advertising finished playing back background sound to continue playing.
- The audio data is sorted by folder, supports up to 100 folders, folders can assign every 255 Tracks
7,30 level adjustable volume, adjustable EQ 6.
₹82.00 (excl. GST)MP3-TF-16P MP3 SD Card Module with Serial Port
₹82.00 (excl. GST) -
Infrared IR Wireless Remote Control Module Kit for Arduino
Features :
- Depending on the surrounding environment and the sensitivity of the receiver the transmission distance may be affected.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
₹45.00 (excl. GST)Infrared IR Wireless Remote Control Module Kit for Arduino
₹45.00 (excl. GST) -
5V 8 Channel Relay Module
Features:
- The 8550 transistor drive, drive ability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
₹285.00 (excl. GST)5V 8 Channel Relay Module
₹285.00 (excl. GST) -
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
- PCB Size: 60 x 20 x 13.5 (LxWxH)mm.
- Color: red, yellow, green
- LED Size: 10mm x 7.
- Brightness: Normal brightness.
- Voltage: 5V.
- Interface: common cathode red yellow green control.
₹38.00 (excl. GST) -
₹10.00 (excl. GST)
74HC02 Quad 2-Input NOR Gate IC (7402 IC) DIP (pack of 5)
₹10.00 (excl. GST) -
75pcs. Gears Assorted Kit for DIY Robotics and Household Repair
These gears are used in laboratories, science education, and DIY models and RC-airplane/helicopter repair, as well as many household repairs like old music system etc. its a great toolkit for promoting DIY abilities, improving children’s, teen’s hands-on skills and divergent thinking.
- Material: plastic;
- Colour: white, orange, Blue, yellow
₹185.00 (excl. GST)75pcs. Gears Assorted Kit for DIY Robotics and Household Repair
₹185.00 (excl. GST) -
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
Features :
- 5V 16-Channel Relay Module with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- Each relay common terminal “COM” are independent, user-friendly access to different signals, each relay are normally closed and normally open with the port.
- Each relay is equipped with motion lights.
- All interfaces can be directly connected through the terminal leads, very convenient.
₹546.00 (excl. GST)5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
₹546.00 (excl. GST) -
74LS27 Triple 3-input NOR Gate IC (7427 IC) DIP (Pack of 5)
- Max Supply Voltage: 7V
- Max Input Voltage: 7V
- Storage Temperature Range: -65ºC to +150ºC
₹10.00 (excl. GST)74LS27 Triple 3-input NOR Gate IC (7427 IC) DIP (Pack of 5)
₹10.00 (excl. GST) -
Force Sensor – 0.5″ Force Sensitive Resistor
Features:-
Easily customizable to a wide range of sizes.
Cost-effective.
Ultra-thin: 0.45 mm.
Robust: up to 10 million actuations.
Simple and easy to Integrate.Applications:-
Testing and Measurement Equipment.
Embedded Electronics.
OEM Development Kit.
Consumer Electronics.
Multimeter.₹280.00 (excl. GST)Force Sensor – 0.5″ Force Sensitive Resistor
₹280.00 (excl. GST) -
LX-103 Light Meter Luxmeter, Measures Up-To 2,00,000 LUX/20,000 FC
Features Of HTC LX-103 Digital Lux Meter:
- Large Range up to 200000Lux
- Large LCD Display with Back Light and Bar Graph
- Auto Power Off
- MAX/MIN and Data Hold
₹2,015.00 (excl. GST)LX-103 Light Meter Luxmeter, Measures Up-To 2,00,000 LUX/20,000 FC
₹2,015.00 (excl. GST) -
IRF3205 MOSFET
Features:
- Gate to source voltage is ±20V
- On-Resistance Rds(on) of 8mohm at Vgs of 10V
- Power dissipation (Pd) of 130W at 25°C
- Continuous drain current (Id) of 110A at Vgs 10V and 25°C
- Operating junction temperature range from -55°C to 175°C
- Applications: Power Management, Industrial, Portable Devices, Consumer Electronics.
₹19.00 (excl. GST)IRF3205 MOSFET
₹19.00 (excl. GST) -
1S 2A BMS Board 3.7V 18650 Lithium Battery Protection Board
Features:
- Easy to use
- Color: Green
- The internal resistance difference is not more than 5mQ
- BMS Li-ion Battery Protection Board
- The tolerance is less than 30mAh
- Single-cell consumption of battery (self-consumption): ≤3uA
- In this MOSFET are employed to do the monitoring task which protects our battery cells from overcharge
Precautions:1. Before installing the protection board, the battery should be matched well (the voltage difference between each battery should not be 0.05V, the internal resistance difference is not more than 5mQ, the tolerance is less than 30mAh), the smaller the battery voltage difference, the better the protection board will work. .2. The batteries are connected in parallel and then connected in series, and the welding is correct (18650 battery nickel spot welding, other batteries are soldered), do not screw, easy to burn the protection board IC.3. If it is an old battery change board, please pay attention: Please confirm the battery is normal before buying?4. When installing, use a multimeter to check whether the voltage of each string is the same. The performance failures with a difference of more than 1.0V are: running not far, starting and powering off, charging time is short, basically the battery core problem is more. The failure of the protection board is as follows: the battery cannot be charged, and the battery has a voltage and cannot be discharged.₹15.00 (excl. GST)1S 2A BMS Board 3.7V 18650 Lithium Battery Protection Board
₹15.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale