-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
ATmega328P Micro-Controller IC
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
₹300.00 (excl. GST)ATmega328P Micro-Controller IC
₹300.00 (excl. GST) -
Auto Hand Sanitizer Dispenser Kit with IR sensor, Relay, Pump, Power Supply and Jumper Wires – V1
The kit Contains:
1 pc IR Sensor
1 pc IR Control Board with Relay port
1 Pc Mini Submersible Pump
1 Pc 12V Adaptor
40 pc Jumper Wire ( Female to Female)₹410.00 (excl. GST) -
Auto Hand Sanitizer Dispenser Kit with Ultrasonic HCSR-04 Sensor Module, Relay, Pump, Power Supply and Jumper Wires – V2
- Best kit for making automatic hand sanitizer dispenser machine.
- Automatic Relay Controller Board
- Easy to use DIY Kit with IR Sensor Module and 9v DC Water Pump
- Use 12v, 2 Ampere Adapter for best result
₹990.00 (excl. GST) -
Automatic Dawn to Dusk Sensor Board with Relay and LDR for Solar Based Street Light
Features:
LDR Based Sensor
On Board 12V Relay to Control Solar street Light
Relay will automatically turn ON in Low lighting Condition and will turn OFF when lighting is adequate
Pefect to control Solar based Garden light or Street light
Works best in open Natural Light Source₹125.00 (excl. GST) -
Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
Features:
Automatic Sensing
8 Liter Tank Capacity
Mist Spray for better output
Easy to Install, just need to plug and use
6 Months Manufacture Warranty
Works under Sunlight₹3,500.00 (excl. GST)Automatic Hand Sanitizer Dispenser with Ultrasonic Sensor – 8 Litre Capacity
₹3,500.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Automatic Sanitizer Dispenser/Tunnel Control Board with inbuilt IR (InfraRed) Sensor Interface, Relay, Timer Control and Motor Port Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹175.00 (excl. GST) -
₹180.00 (excl. GST)Avr Usb Programmer Usbasp Usbisp Isp For Atmel Atmega Attiny Microcontrollers
₹180.00 (excl. GST) -
BASIC NX3224T028 2.8″HMI LCD Touch Display
Features:
- 320 x 240 Resolution
- RGB 65K true to life colours
- TFT screen with integrated resistive touch panel
- 4 pin TTL serial interface
- 4M Flash memory for User Application Code and Data
- Onboard micro-SD card slot for firmware upgradation
- Visual Area: 57.6mm(L)×43.2mm(W)
- Adjustable Brightness: 0~180 nit, the interval of adjustment is 1%
- 5V65mA power consumption
- Compatible with Raspberry Pi A+, B+, Pi 2, Pi 3, Arduino.
- Certificates: CE/EMC, RoHS (certificates)
Software:
₹2,450.00 (excl. GST)BASIC NX3224T028 2.8″HMI LCD Touch Display
₹2,450.00 (excl. GST) -
Basic Robotics kit
Basic Robotics kit
Breadboard – 1
DC Motor – 1
Buzzer – 1
Green LED – 1
Red LEDs – 2
Push Button Switches – 3
Slide Switch – 1
Red Alligator Clip – 1
Black Alligator Clip – 1
Connecting Towers – 6
10kΩ Resistor – 1
20kΩ Resistor – 1
3.3kΩ Resistor – 1
Capacitor – 1
Jumper Wires – 3
₹10,170.00 (excl. GST)Basic Robotics kit
₹10,170.00 (excl. GST) -
BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Operating Pressure: 300 hPa to 1100 hPa
- Peak current: 1.12mA
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹40.00 (excl. GST)BMP 280 Barometric Pressure and Altitude Sensor I2C/SPI Module
₹40.00 (excl. GST) -
BMP180 Barometric Pressure Altitude Sensor I2C/SPI Module
Specifications and Features :
- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Enhancement of GPS navigation (e.g. time-to first-fix improvement, dead-reckoning, slope detection)
- Indoor navigation (floor detection, elevator detection)
- Outdoor navigation, leisure and sports applications
- Weather forecast
- Health care applications (e.g. spirometry)
- Vertical velocity indication (e.g. rise/sink speed)
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Peak current: 1.12mA
- Operating Pressure: 300 hPa to 1100 hPa
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹32.00 (excl. GST)BMP180 Barometric Pressure Altitude Sensor I2C/SPI Module
₹32.00 (excl. GST)
