-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
BMP180 Barometric Pressure Altitude Sensor I2C/SPI Module
Specifications and Features :
- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Enhancement of GPS navigation (e.g. time-to first-fix improvement, dead-reckoning, slope detection)
- Indoor navigation (floor detection, elevator detection)
- Outdoor navigation, leisure and sports applications
- Weather forecast
- Health care applications (e.g. spirometry)
- Vertical velocity indication (e.g. rise/sink speed)
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Peak current: 1.12mA
- Operating Pressure: 300 hPa to 1100 hPa
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
₹32.00 -
Bms 13S 40A 48V Waterproof Protection Circuit Module
Bms 13S 40A 48V
BMS Specifications :
- 13S 48V BMS
- Discharging current – 40A
- Charging current – 20 A
- Waterproof.
₹1,250.00 -
BMS 15S 48V 40A DALY LiFePo4 Waterproof Battery Management System
BMS 15S 48V 40A
Specification:-
- Balance Current (mA): 30±5
- Balance Detect Voltage (V): 3.5
- Cable Size (AWG): 10
- Charge Current (A):Â 20
- Charge Voltage (V): 54.75
- Height (mm):Â 10.6
- Length (mm): 81.5
- Model: 15S 48V 40A
- Over Discharge Detect (V): 2.2±0.05
- Over Discharge Release (V): Off load
- Overcharge Detect Voltage (V): 3.75±0.05
- Overcharge Release Voltage (V): 3.55±0.05
- Width (mm): 60.6
- Working Current (uA): 100
- Working Temperature Range (°C): -20 to 70
₹1,800.00 -
BMS 24V 7S 20A Daly Waterproof BMS for Li-ion Cell (NMC) 25.9V
BMS 24V 7S 20A
Features :
- Strong load ability, constant discharge current 10A~250A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
- IC itself has power balancing function. The circuit is simple and reliable.
- Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable. long time short circuit of the load won’t affect the PCB and the battery. Temperature protection during charging and discharging.
- Extreme low power consumption. the consumption of the whole device is less than 50uA.
- PCB use high anti-corrosion, high water resistance, high impedance ESD conformal coating.
₹850.00 -
BMS 4 Series 14.8V 18650 Lithium Battery Equalization Board
BMS 4 Series 14.8V 18650
- Type:Â Voltage Regulator
- Supply Voltage:14.8V/16.8V
- Dissipation Power:18650 Lithium Battery Balanced Function Board
- Operating Temperature:Â Discharge Shunt balanced 4.2V 66mA
₹79.00 -
BMS 4S 12V 60A Daly Lifepo4 -Battery Management System
BMS 4S 12V 60A
- Brand: Daly
- Model: 4S 12V 60A
- Charge Current: 30A
- Discharge Current: 60A
- Battery Type: Lithium-Ion Battery
- Input Voltage (V): 12V
- Number of cells in series: 4S
₹1,395.00 -
BMS 8S 24V 20A DALY Lifepo4 Battery Management System
BMS 8S 24V 20A
- Model: 8S 24V 20A
- Battery Type: Lithium Battery
- No.of cells in series: 8s
- Discharge Current: 20A
- Charge Current: 10A
₹800.00 -
BO Motor Wheel
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Blue
₹9.00BO Motor Wheel
₹9.00 -
Brass Heat Set Threaded Round Insert Nut(M3 X 6 mm)-25 Pcs.
A heat-set threaded insert has two important features. The inside of the brass piece of hardware has a nice, threaded thru the hole.
The exterior has ridges, so when installed using heat, the plastic can easily flow around and then solidify. Once solidified, the insert is in place, making it resist torque and pull-out.
Installation:
Tools you need:
-
Heat-set threaded Insert Nut
-
 Plastic Body Part
-
Soldering Iron
Preparing the threaded insert:
Use the soldering iron on a low setting to preheat the threaded insert using a shallow tapered soldering iron tip.
Feature:
- Heat-Set is designed specifically for notch-sensitive plastics
- Expansion-Sets offer simple press-in installation
- Flow-Sert is a blind insert for installation during the moulding process
- Brass Material Can Resist Heat.
- Not Easy to Rust, Strong Corrosion Resistance.
- Very high pull-out and torque resistance.
- Can be installed by ultrasonic or Heat into thread tapered hole, or moulded in during injection.
- No need to counterbore or countersink the boss hole since the insert has guide pilot.
- Used on the injection moulding for tightly fixing.
₹55.00 -
-
Brass M2.5 Standoff Spacer Hex Screws Nut Kit -120pcs
   Screws Nut Kit
- Material: Brass, Stainless Steel; Thread: M2.5; Thread Pitch: 0.4mm; Female-Male Thread; Length: 6mm+6mm, 10mm+6mm, 15mm+6mm, 20mm+6mm; Female Thread Length: 6mm, 10mm, 15mm, 20mm; Packaging List: 10pcs 6mm+6mm Standoffs; 10pcs 10mm+6mm Standoffs; 10pcs 15mm+6mm Standoffs; 10pcs 20mm+6mm Standoffs; 10pcs 6mm Standoffs; 10pcs 10mm Standoffs; 10pcs 15mm Standoffs; 10pcs 20mm Standoffs; 20pcs M2.5x6mm Screws; 20pcs M2.5x2mm Nuts (Packed in a plastic box)
₹680.00 -
Brass Nozzle with Connector for Mist Fog Spray in Sanitizer Dispenser or Tunnel
This is a brass nozzle with connector for Mist or Fog creation in Sanitizer Dispenser or tunnel. It can be used with alcohol based sanitizer liquid as well as normal liquid.
₹550.00 -
Breadboard Power Supply Module 3.3V 5V
Input Voltage: 6.5-12 V (DC) or USB power supply
Output Voltage: 3.3V or 5V can switch over
Maximum Output Current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use₹65.00
