No products in the cart.
SeeedStudio Grove GSR sensor
SeeedStudio
Features:
- Detects conductance of the skin
- Finger Straps for electrodes
₹840.00 (Price is Exclusive of GST)SeeedStudio Grove GSR sensor
₹840.00 (Price is Exclusive of GST)Telemetry Kit 433Mhz 100MW
Telemetry Kit
Features :
- Very small size & Lightweight (under 4 grams without antenna)
- Transparent serial link
- MAVLink protocol framing and status reporting
- Frequency hopping spread spectrum (FHSS)
- Adaptive time division multiplexing (TDM)
- Support for LBT and AFA
- Configurable duty cycle
- Interchangeable air and ground modules
- Micro-USB port
- 6-position DF13 connector
- 100 mW maximum output power (adjustable)
- Based on HopeRF’s HM-TRP module
- RP-SMA connector
- 2-way full-duplex communication through adaptive TDM
- UART interface
- Transparent serial link
- MAVLink protocol framing
- Frequency Hopping Spread Spectrum (FHSS)
- Configurable duty cycle
- Error correction corrects up to 25% of bit errors
- Configurable through Mission Planner and APM Planner
- Built-in error correcting code (can correct up to 25% data bit errors)
- The demonstrated range of several kilometers with a small Omni antenna
- Can be used with a bi-directional amplifier for even more range
- AT commands for radio configuration
- RT commands for remote radio configuration
- Adaptive flow control when used with APM
- Based on the HopeRF HM-TRP radio module, featuring a SiLabs Si1000 RF microcontroller.
₹6,000.00 (Price is Exclusive of GST)Telemetry Kit 433Mhz 100MW
₹6,000.00 (Price is Exclusive of GST)DC Geared Motor with Encoder 16 RPM 138N.Cm 12V SPG30E-270K
DC Geared Motor
- Rated Voltage: 12 V
- No-load Current: 70 mA
- Rated Current: 410 mA
- Rated Torque: 14 kg-cm
- Shaft Diameter: 6 mm
- Gear Ratio: 270:1
₹1,690.00 (Price is Exclusive of GST)DC Geared Motor with Encoder 16 RPM 138N.Cm 12V SPG30E-270K
₹1,690.00 (Price is Exclusive of GST)Set of M5 X 65 MM Socket Head Cap (Allen) Bolt and Nut-12 pcs
M5 X 65 MM
- Bolt Head Outer Diameter: 8.5 mm
- Bolt Length: 65 mm
- Bolt Head Style: Round
- Bolt Drive Style: Hex Socket
- Color: Black
- Nut Type: Hex
- Nut Outer Diameter: 8 mm
- Allen Key size Required: 4 mm.
- Hardness is 2 times higher than copper,10 times higher than aluminum.
₹335.00 (Price is Exclusive of GST)Set of M5 X 65 MM Socket Head Cap (Allen) Bolt and Nut-12 pcs
₹335.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
Timing Pulley
- Material: Steel
- Length of Allen Key: 48 mm
- Width of Allen Key: 1.4 mm
- Inner Diameter of grub: 2 mm
- Outer Diameter of Grub: 3.8 mm
₹12.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
₹12.00 (Price is Exclusive of GST)M3 X 8mm Bolt and Nut Set-25 pcs.
M3 X 8mm
- Type: M3 (3.0mm Diameter)
- Material: Mild Steel
- Bolt Length: 8mm
- Bolt Head Style: Slotted & Round
- Pack Quantity: 25 sets.
₹48.00 (Price is Exclusive of GST)M3 X 8mm Bolt and Nut Set-25 pcs.
₹48.00 (Price is Exclusive of GST)M3 x 25mm CHHD Bolt and Nut Set-20pcs.
M3 x 25mm
- Type: M3 (3.0mm Diameter)
- Material: Mild Steel
- Bolt Head Style: Slotted & Round
- Pack Quantity: 20 sets.
- Nut Type: Hex
₹48.00 (Price is Exclusive of GST)M3 x 25mm CHHD Bolt and Nut Set-20pcs.
₹48.00 (Price is Exclusive of GST)M4 x 20mm CHHD Bolt and Nut Set-20Pcs.
M4 x 20mm
- Type: M4 (4.0mm Diameter)
- Material: Mild Steel
- Bolt Head Style: Slotted & Round
- Pack Quantity: 20 sets.
- Nut Type: Hex
₹48.00 (Price is Exclusive of GST)M4 x 20mm CHHD Bolt and Nut Set-20Pcs.
₹48.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
Timing Pulley
Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for 3D Printers
₹11.00 (Price is Exclusive of GST)Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
₹11.00 (Price is Exclusive of GST)6200ZZ Bearing 10x30x9 Shielded Miniature Ball Bearings
6200ZZ Bearing
- Model: 6200ZZ
- Inside diameter: 10 mm.
- Outside diameter: 30 mm.
- Width: 9 mm.
- Weight: 118 gm. (Each has 29.5 gm).
₹30.00 (Price is Exclusive of GST)6200ZZ Bearing 10x30x9 Shielded Miniature Ball Bearings
₹30.00 (Price is Exclusive of GST)M3 x 10mm CHHD Bolt and Nut Set-25 pcs.
Bolt and Nut Set
- Type: M3 (3.0mm Diameter)
- Material: Mild Steel
- Bolt Head Style: Slotted & Round
- Pack Quantity: 25 sets.
- Nut Type: Hex
₹48.00 (Price is Exclusive of GST)M3 x 10mm CHHD Bolt and Nut Set-25 pcs.
₹48.00 (Price is Exclusive of GST)Aluminium NEMA23 Shaft Coupling 6.35mm X 8mm
NEMA23 Shaft Coupling
- Exhibits good strength.
- High-grade aluminum couplings.
- Fit for all CNC projects
₹70.00 (Price is Exclusive of GST)Aluminium NEMA23 Shaft Coupling 6.35mm X 8mm
₹70.00 (Price is Exclusive of GST)