-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
Ceramic Cement Power Resistors 5W Watt 10K Ohm 5% (Pack of 5)
- Product Name : Cement Resistor;
- Body Material : Ceramic, Cement
- Power : 5W;Resistance : 10KÎ
- Tolerance : ±5% (J);
- Body Size (Approx.) : 22 x 9 x 10mm/0.86″ x 0.35″ x 0.39″ (L * W * H)
- Lead Diameter (Approx.) : 0.8mm / 0.031″;Color : White
₹30.00 -
Charger Board Protection Module for Lithium Battery 3S 10A 12V 18650
Charger Board Protection
Features :
- Operating current : 6 – 8A.
- Current limit : 10 – 13A.
- Storage condition : -40 ~ +80 ℃.
- Resting current: less than 30uA.
- Effective lifetime: over 30,000 hours.
- Internal resistance: less than 100mΩ.
- Short-circuit protection: protection.
- Self-recovery delay.
₹46.00 -
CN3791 12V MPPT Solar Charger Module
CN3791 12V MPPT Solar Charger Module
Features:
- Maximum Power Point Tracking (MPPT) Solar Charger Module
- 2-Pin JST Connectors for Solar Panel and Battery Connection
- PWM Switching Frequency of 300KHz
- Maximum Charging Current of 2A
₹195.00 -
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Features :
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹116.00 -
Color sensor recognition module
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
₹260.00Color sensor recognition module
₹260.00 -
Combination Screwdriver Set (Pack of 31) – JK 6036
Meet the Jackly 31-in-1 ratchet screwdriver set – the tool that every household should have. With this compact screwdriver set, you can complete all the pending repair works by opening mobile phones, computers, PDA housings, PSPs, NDS, and music players.
₹145.00 -
Component/IC Extraction Tool
IC Extraction Tool
- Dimensions : 97 x 45 x 14 mm
- Weight: 21 grams
- The PLCC can be easily removed from the substrate without damaging any IC conductors.
- Fits: The chip extraction tool is perfectly suitable for motherboards, microcontrollers, and programmers.
- Can be used to remove PLCC and IC from Sockets
- Made up of High-Quality Steel for durability
- Plastic Shielding to Prevent Shocks
₹170.00Component/IC Extraction Tool
₹170.00 -
CP2102 USB 2.0 to TTL UART Serial convertor Module
Features:-
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
₹139.00 -
Creality CR-200B Pro 3D Printer
Extruder Temp. ≤ 260℃ Filament Diameter (mm) 1.75 File Format STL/OBJ/AMF Nozzle Diameter (mm) 0.4 Dimensions in mm (LxWxH) 435x411x503mm Weight (Kg) 16.5kg Accuracy ±0.1mm Display Size (inch) 4.3 inch touch screen Motherboards support Integrated 32-bit silent mainboard Camera Built-in 1080P HD Camera Features-
- High Precision Printing: Achieve intricate details and smooth finishes with the CR-200B Pro’s precise printing capabilities.
- Large Build Volume: Create bigger projects effortlessly thanks to the generous build area, expanding your creative horizons.
- User-Friendly Interface: Intuitive touchscreen interface and easy-to-navigate menus make printing hassle-free for beginners and experts.
- Quiet Operation: Enjoy a peaceful environment with the printer’s quiet stepper motor drivers, ideal for home or office settings.
- Filament Detection: Automatic filament detection pauses printing when material runs out, preventing incomplete projects.
- Resume Printing Function: Power outage? No worries. The printer resumes from where it left off, saving time and materials.
- Sturdy Construction: The robust frame ensures stability during printing, enhancing the quality of your 3D prints.
- Versatile Filament Compatibility: Print with a wide range of filaments, from PLA to flexible materials, for diverse project possibilities.
- Efficient Cooling System: Improved cooling mechanisms prevent overheating, maintaining consistent print quality.
- Wi-Fi Connectivity: Print remotely and conveniently manage projects using wireless connectivity.
₹44,020.00Creality CR-200B Pro 3D Printer
₹44,020.00 -
Creality CR-30 3D Printer
Features:
- Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, the Creality CR-30 enables you to print “infinitely” on the Z-axis for large prints or production lines producing smaller parts, making it a highly productive mini-factory right on your desk.
- Rolling Conveyor Belt: The wear-resistant conveyor belt on the Creality CR-30 features excellent layer adhesion. In addition, prints will fall off automatically when they reach the belt ends, making it a smoother workflow for you to print continuously.
- Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing experience.
- Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force and allows for large filament spools, combined with the 45 degrees slanting nozzle, the Creality CR-30 is capable of 200 hours of continuous printing.
- Exclusive 3DPrintMill Slicer: Specially designed slicer Creality Belt is available for download. It prioritizes ease of use and thus makes it easier for you to explore this brand-new belt printer.
- Supporting Material – PLA, TPU & PETG
₹70,473.00Creality CR-30 3D Printer
₹70,473.00 -
Creality CR-6 SE 3D Printer
Features:
- True leveling-free technology used in this 3d printer
- The Creality CR-6 SE 3D Printer is designed with a modular nozzle that means you can customize it.
- The Creality CR-6 SE 3d printer also comes with a well-arranged ribbon cable
- Easily movable to anywhere
₹23,238.00Creality CR-6 SE 3D Printer
₹23,238.00 -
Creality CR-M4 3D Printer
Features:
- FLEXIBLE PC SURFACE AND FAST-HEATING BED: Creality CR-M4 New 3d printer for 2023 has the 4-layered build platform. The PC coating provides strong adhesion. The bendable spring steel sheet is easy to remove in large models and will not deform after long-term use. The magnetic base and two pins allow quick snap-on.
- MULTIPLE PRINTING OPTIONS: The new CRM4 Creality 3d printer gives you a variety of printing options with Cloud Printing capabilities through Creality Cloud software as well as USB-A drive, USB-C cable, RJ45 LAN, and Wi-Fi connections.
- MULTI-PRINTER CONTROL: Easily control multiple CR-M4 3D printers from one convenient location with Creality Print or Creality Cloud Web applications. This enables enhanced and streamlined production pipelines.
₹79,702.00Creality CR-M4 3D Printer
₹79,702.00
