-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST)
-
18650 Battery Holder Case DIY Lithium Battery Box Battery Holder with Pin for 4 * 18650
- Size: As shown in images, suitable for 18650 lithium ion battery, Four Cell holder
- Color: Black; 1pcs 18650 Battery Holder Case Leads 3.7V Clip Type for Soldering / Connecting
- Material Type: Metal and plastic
- The package does not include battery of any type, only the cover.
₹72.00 (excl. GST) -
HT12D and HT12E Encoder Decoder IC
Feature:
- Operating voltage: 2. 4V~12v
- Easy interface with an rf or an infrared transmission medium
- Minimal external components
- 18 Pin IC
₹75.00 (excl. GST)HT12D and HT12E Encoder Decoder IC
₹75.00 (excl. GST) -
4 Bits Digital Tube LED Display Module With Clock Display
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
- Display Dimensions: 42x24x12 (LxWxH) mm
₹75.00 (excl. GST)4 Bits Digital Tube LED Display Module With Clock Display
₹75.00 (excl. GST) -
DS18B20 Water Proof Temperature Sensor Probe
DS18B20 Water Proof Temperature Sensor Probe is a 1 Meter Long Waterproof, sealed and pre-wired digital temperature sensor probe based on DS18B20 sensor. It is very handy for when you need to measure something far away, or in wet conditions. Because they are digital, you don’t get any signal degradation even over long distance.
₹75.00 (excl. GST)DS18B20 Water Proof Temperature Sensor Probe
₹75.00 (excl. GST) -
MT30 3 Pole Motor/ESC Connector Set Female-1Pcs
Features:
- Brand: Amass
- Suitable for: 16AWG wire (Max)
- Color: Yellow
- Gender: Female
- Gold Plated Connector
- High-Quality Material
₹75.00 (excl. GST)MT30 3 Pole Motor/ESC Connector Set Female-1Pcs
₹75.00 (excl. GST) -
GT2 Close-Loop Rubber Timing Belt for 3D Printer
Features:
- Type: Closed Loop
- Length: 158 mm
- Width: 6mm
- Good quality and durable low noise
₹75.00 (excl. GST)GT2 Close-Loop Rubber Timing Belt for 3D Printer
₹75.00 (excl. GST) -
ADC0809CCN-IC ADC 8BIT SAR 28DIP
ADC0809CCN
Reference Type :External
Voltage – Supply, Analog : 4.5V ~ 6.5V
Voltage – Supply, Digital : 4.5V ~ 6.5V
Features
-Operating Temperature : -40°C ~ 85°C
Package / Case : 28-DIP (0.600″, 15.24mm)
Supplier Device Package : 28-DIP
Mounting Type : Through Hole
₹75.00 (excl. GST)ADC0809CCN-IC ADC 8BIT SAR 28DIP
₹75.00 (excl. GST) -
USBRS485 USB to Rs485 485 Converter Adapter
- Fully compliant USB 2.0 Standard, backward compatible with USB1.1
- Support system: windows xp, vista, windows 7, Linux, macos and wince5.0 Drive
- Supports baud rate range: 75bps 115200bps, up to 6mbps
₹76.00 (excl. GST)USBRS485 USB to Rs485 485 Converter Adapter
₹76.00 (excl. GST) -
A4988 driver Stepper Motor Driver
Features :
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
₹78.00 (excl. GST)A4988 driver Stepper Motor Driver
₹78.00 (excl. GST) -
BMS 4 Series 14.8V 18650 Lithium Battery Equalization Board
- Type: Voltage Regulator
- Supply Voltage:14.8V/16.8V
- Dissipation Power:18650 Lithium Battery Balanced Function Board
- Operating Temperature: Discharge Shunt balanced 4.2V 66mA
₹79.00 (excl. GST)BMS 4 Series 14.8V 18650 Lithium Battery Equalization Board
₹79.00 (excl. GST) -
Propeller Pair-10X4.5 Inch Carbon Nylon
- Length: 10″.
- Pitch: 4.5″.
- Weight: 30 gm.
- Shaft Diameter: 7.7 mm.
- Total Length: 10 inch / 250 mm
- Material: Carbon Fiber
₹80.00 (excl. GST)Propeller Pair-10X4.5 Inch Carbon Nylon
₹80.00 (excl. GST) -
Solder Suction Tin Pump
- Metal body
- High suction power
- Teflon nozzle
- Easily replaceable nozzle
- Easy to clean and maintain
₹80.00 (excl. GST)Solder Suction Tin Pump
₹80.00 (excl. GST)
