NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(Price is Exclusive of GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (Price is Exclusive of GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)
CN3791 12V MPPT Solar Charger Module
CN3791 12V MPPT Solar Charger Module
Features:
- Maximum Power Point Tracking (MPPT) Solar Charger Module
- 2-Pin JST Connectors for Solar Panel and Battery Connection
- PWM Switching Frequency of 300KHz
- Maximum Charging Current of 2A
₹195.00 (Price is Exclusive of GST)CN3791 12V MPPT Solar Charger Module
₹195.00 (Price is Exclusive of GST)CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Features :
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹116.00 (Price is Exclusive of GST)CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
₹116.00 (Price is Exclusive of GST)Color sensor recognition module
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
₹260.00 (Price is Exclusive of GST)Color sensor recognition module
₹260.00 (Price is Exclusive of GST)Combination Screwdriver Set (Pack of 31) – JK 6036
Meet the Jackly 31-in-1 ratchet screwdriver set – the tool that every household should have. With this compact screwdriver set, you can complete all the pending repair works by opening mobile phones, computers, PDA housings, PSPs, NDS, and music players.
₹145.00 (Price is Exclusive of GST)Combination Screwdriver Set (Pack of 31) – JK 6036
₹145.00 (Price is Exclusive of GST)Component/IC Extraction Tool
IC Extraction Tool
- Dimensions : 97 x 45 x 14 mm
- Weight: 21 grams
- The PLCC can be easily removed from the substrate without damaging any IC conductors.
- Fits: The chip extraction tool is perfectly suitable for motherboards, microcontrollers, and programmers.
- Can be used to remove PLCC and IC from Sockets
- Made up of High-Quality Steel for durability
- Plastic Shielding to Prevent Shocks
₹170.00 (Price is Exclusive of GST)Component/IC Extraction Tool
₹170.00 (Price is Exclusive of GST)CP2102 USB 2.0 to TTL UART Serial convertor Module
Features:-
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
₹139.00 (Price is Exclusive of GST)CP2102 USB 2.0 to TTL UART Serial convertor Module
₹139.00 (Price is Exclusive of GST)Creality CR-200B Pro 3D Printer
Extruder Temp. ≤ 260℃ Filament Diameter (mm) 1.75 File Format STL/OBJ/AMF Nozzle Diameter (mm) 0.4 Dimensions in mm (LxWxH) 435x411x503mm Weight (Kg) 16.5kg Accuracy ±0.1mm Display Size (inch) 4.3 inch touch screen Motherboards support Integrated 32-bit silent mainboard Camera Built-in 1080P HD Camera Features-
- High Precision Printing: Achieve intricate details and smooth finishes with the CR-200B Pro’s precise printing capabilities.
- Large Build Volume: Create bigger projects effortlessly thanks to the generous build area, expanding your creative horizons.
- User-Friendly Interface: Intuitive touchscreen interface and easy-to-navigate menus make printing hassle-free for beginners and experts.
- Quiet Operation: Enjoy a peaceful environment with the printer’s quiet stepper motor drivers, ideal for home or office settings.
- Filament Detection: Automatic filament detection pauses printing when material runs out, preventing incomplete projects.
- Resume Printing Function: Power outage? No worries. The printer resumes from where it left off, saving time and materials.
- Sturdy Construction: The robust frame ensures stability during printing, enhancing the quality of your 3D prints.
- Versatile Filament Compatibility: Print with a wide range of filaments, from PLA to flexible materials, for diverse project possibilities.
- Efficient Cooling System: Improved cooling mechanisms prevent overheating, maintaining consistent print quality.
- Wi-Fi Connectivity: Print remotely and conveniently manage projects using wireless connectivity.
₹44,020.00 (Price is Exclusive of GST)Creality CR-200B Pro 3D Printer
₹44,020.00 (Price is Exclusive of GST)Creality CR-30 3D Printer
Features:
- Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, the Creality CR-30 enables you to print “infinitely” on the Z-axis for large prints or production lines producing smaller parts, making it a highly productive mini-factory right on your desk.
- Rolling Conveyor Belt: The wear-resistant conveyor belt on the Creality CR-30 features excellent layer adhesion. In addition, prints will fall off automatically when they reach the belt ends, making it a smoother workflow for you to print continuously.
- Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing experience.
- Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force and allows for large filament spools, combined with the 45 degrees slanting nozzle, the Creality CR-30 is capable of 200 hours of continuous printing.
- Exclusive 3DPrintMill Slicer: Specially designed slicer Creality Belt is available for download. It prioritizes ease of use and thus makes it easier for you to explore this brand-new belt printer.
- Supporting Material – PLA, TPU & PETG
₹70,473.00 (Price is Exclusive of GST)Creality CR-30 3D Printer
₹70,473.00 (Price is Exclusive of GST)Creality CR-6 SE 3D Printer
Features:
- True leveling-free technology used in this 3d printer
- The Creality CR-6 SE 3D Printer is designed with a modular nozzle that means you can customize it.
- The Creality CR-6 SE 3d printer also comes with a well-arranged ribbon cable
- Easily movable to anywhere
₹23,238.00 (Price is Exclusive of GST)Creality CR-6 SE 3D Printer
₹23,238.00 (Price is Exclusive of GST)Creality CR-M4 3D Printer
Features:
- FLEXIBLE PC SURFACE AND FAST-HEATING BED: Creality CR-M4 New 3d printer for 2023 has the 4-layered build platform. The PC coating provides strong adhesion. The bendable spring steel sheet is easy to remove in large models and will not deform after long-term use. The magnetic base and two pins allow quick snap-on.
- MULTIPLE PRINTING OPTIONS: The new CRM4 Creality 3d printer gives you a variety of printing options with Cloud Printing capabilities through Creality Cloud software as well as USB-A drive, USB-C cable, RJ45 LAN, and Wi-Fi connections.
- MULTI-PRINTER CONTROL: Easily control multiple CR-M4 3D printers from one convenient location with Creality Print or Creality Cloud Web applications. This enables enhanced and streamlined production pipelines.
₹100,500.00₹104,500.00(Price is Exclusive of GST)Creality CR-M4 3D Printer
₹100,500.00₹104,500.00(Price is Exclusive of GST)Creality Ender 3 Neo FDM 3D Printer
FEATURES-
- 1. CR Touch for Easier Leveling- Self-developed CR Touch empowers auto-leveling by adjusting the height between the nozzle and platform, making leveling easier and more accurate.
- 2. Enjoy Quiet Printing- With a silent mainboard, low decibel has less impact on study or work, creating cozy printing atmosphere
- 3. Quick Heat Dissipation- The corrugated heat sink enlarges the radiating area. Quick heat dissipation vastly reduces the risk of tube blockage.
- 4. Full-metal Extruder for Smooth Feeding- The full-mental extruder is more durable. The stronger extrusion force enables smooth feeding.
- 5. Hands-on Fun: Independently assemble the printer and have fun. Modify a 3D printer, enjoy DIY.
- 6. Reliable Printing with Durable Build Surface: Durable carborundum build surface featured by even heating reduces the risk of warping. Strong adhesion ensures the stability and quality of the print.
- 7. Steadiness Enhanced by Mold Springs: Alloy steel mold springs of good toughness give better support to the platform, guaranteeing the printing quality.
- 8. No Fear of Outage: The resume printing function can accurately record the data and can resume the print from where it’s left off, avoiding printing failure and material wasting.
Heat Bed Temperature : up to 100℃ Build Surface : Carborundum Glass Extruders : Bowden extruders Extruder Material : Full-metal Leveling Mode : CR Touch Display : 12864 Mono Knob Screen Mainboard : 32-bit Silent Mainboard Resume Printing : Yes Rated Voltage : 100-120V~, 200-240V~, 50/60Hz Rated Power : 350W Slicing Software : Creality Slicer/Cura/Simplify3D Data Transmission Method : USB/TF Card 3D File Format : STL/OBJ/AMF Supported Filament : PLA/PETG/ABS ₹13,867.55 (Price is Exclusive of GST)Creality Ender 3 Neo FDM 3D Printer
₹13,867.55 (Price is Exclusive of GST)Creality Ender 3 V2 3D Printer
It’s the same old Ender-3 3D Printer experience, improved with current hardware that includes a 32-bit mainboard, silent stepper motor drivers, a much cleaner appearance and design, plus plenty of other, smaller, touches.
Features:
- Integrated Compact Design
- Multiple improved upgrades
- Ultra silent printing
₹17,170.00 (Price is Exclusive of GST)Creality Ender 3 V2 3D Printer
₹17,170.00 (Price is Exclusive of GST)
