No products in the cart.
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (Price is Exclusive of GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (Price is Exclusive of GST)
BMS 24V 7S 20A Daly Waterproof BMS for Li-ion Cell (NMC) 25.9V
Features :
- Strong load ability, constant discharge current 10A~250A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
- IC itself has power balancing function. The circuit is simple and reliable.
- Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable. long time short circuit of the load won’t affect the PCB and the battery. Temperature protection during charging and discharging.
- Extreme low power consumption. the consumption of the whole device is less than 50uA.
- PCB use high anti-corrosion, high water resistance, high impedance ESD conformal coating.
₹850.00 (Price is Exclusive of GST)BMS 24V 7S 20A Daly Waterproof BMS for Li-ion Cell (NMC) 25.9V
₹850.00 (Price is Exclusive of GST)BMS 4 Series 14.8V 18650 Lithium Battery Equalization Board
- Type: Voltage Regulator
- Supply Voltage:14.8V/16.8V
- Dissipation Power:18650 Lithium Battery Balanced Function Board
- Operating Temperature: Discharge Shunt balanced 4.2V 66mA
₹79.00 (Price is Exclusive of GST)BMS 4 Series 14.8V 18650 Lithium Battery Equalization Board
₹79.00 (Price is Exclusive of GST)BMS 4S 12V 60A Daly Lifepo4 -Battery Management System
- Brand: Daly
- Model: 4S 12V 60A
- Charge Current: 30A
- Discharge Current: 60A
- Battery Type: Lithium-Ion Battery
- Input Voltage (V): 12V
- Number of cells in series: 4S
₹1,395.00 (Price is Exclusive of GST)BMS 4S 12V 60A Daly Lifepo4 -Battery Management System
₹1,395.00 (Price is Exclusive of GST)BMS 8S 24V 20A DALY Lifepo4 Battery Management System
- Model: 8S 24V 20A
- Battery Type: Lithium Battery
- No.of cells in series: 8s
- Discharge Current: 20A
- Charge Current: 10A
₹800.00 (Price is Exclusive of GST)BMS 8S 24V 20A DALY Lifepo4 Battery Management System
₹800.00 (Price is Exclusive of GST)BO Motor Wheel
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Blue
₹9.00 (Price is Exclusive of GST)BO Motor Wheel
₹9.00 (Price is Exclusive of GST)Bonka 11.1V 3300mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Voltage(V): 11.1
- Configuration: 3S
- Capacity (mAh): 3300
- Discharge Rate: 45C
₹2,586.00 (Price is Exclusive of GST)Bonka 11.1V 3300mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹2,586.00 (Price is Exclusive of GST)Bonka 11.1V 4200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Voltage(V): 11.1
- Configuration: 3S
- Capacity (mAh): 4200
- Discharge Rate: 45C
₹3,200.00 (Price is Exclusive of GST)Bonka 11.1V 4200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹3,200.00 (Price is Exclusive of GST)Bonka 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
- Voltage(V): 11.1
- Configuration: 3S
- Capacity (mAh): 5200
- Discharge Rate: 45C
₹3,727.00 (Price is Exclusive of GST)Bonka 11.1V 5200mAh 45C 3S Hardcase Lithium Polymer Battery Pack
₹3,727.00 (Price is Exclusive of GST)Bonka 14.8V 1300mAh 95C 4S Graphene Lithium Polymer Battery Pack
- Voltage(V): 14.8
- Configuration: 4S
- Capacity (mAh): 1300
- Discharge Rate: 95C
₹2,280.00 (Price is Exclusive of GST)Bonka 14.8V 1300mAh 95C 4S Graphene Lithium Polymer Battery Pack
₹2,280.00 (Price is Exclusive of GST)Bonka 14.8V 1500mAh 95C 4S Graphene Lithium Polymer Battery Pack
- Voltage(V): 14.8
- Configuration: 4S
- Capacity (mAh): 1500
- Discharge Rate: 95C
₹2,937.00 (Price is Exclusive of GST)Bonka 14.8V 1500mAh 95C 4S Graphene Lithium Polymer Battery Pack
₹2,937.00 (Price is Exclusive of GST)Bonka 15.2V 550mAh 90C 4S HV Lithium Polymer Battery Pack
- Voltage(V): 15.2
- Capacity (mAh): 550mAh
- Max. Burst Discharge (C): 90C
- Configuration: 4s
₹1,444.00 (Price is Exclusive of GST)Bonka 15.2V 550mAh 90C 4S HV Lithium Polymer Battery Pack
₹1,444.00 (Price is Exclusive of GST)Bonka 22.2V 16000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
- Voltage(V): 22.2
- Configuration: 6S
- Capacity (mAh): 16000
- Discharge Rate: 5C
₹19,715.00 (Price is Exclusive of GST)Bonka 22.2V 16000mAh 10C 6S Semi Solid State Li-Ion Polymer Battery Pack
₹19,715.00 (Price is Exclusive of GST)