-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00 -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00 -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00Capacitive Soil Sensor V2.0
₹60.00 -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00
-
ATL Package 2 (3D Printing, Rapid Prototyping and DIY Crafting)
Package 2 is all about Prototyping at ATL. Unleash your design and prototyping skills with this package.
₹21,500.00 -
5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
Features of Prusa i3 Desktop 3D Printer DIY Kit
- 3D flatbed printer.
- Acrylic Plate, more stable and durable.
- Support ABS, PLA, PVA, WOOD, and NYLON easy to use.
- Support SD card with LCD for off-line printing (Included with the printer).
- Support Bowden extruder.
- Can be used for printing different items like small components model, decoration etc.
- Special printing software, transfer the STL file to print file.
- Special frame design for you to see the printing process clearly.
- Can make true-to-life and high-resolution models and objects.
- Quiet while working.
- Max heated bed temperature about 110°C(adjustable).
- Max extruder temperature about 240°C.
₹19,371.00 -
IoT & AI Kit
- Main Controller Board: 1
- LED Matrix Module: 2
- Servo Motor: 6
- DC Motor: 4
- Push Button Switch Module: 2
- Temperature Sensor: 1
- Microcontroller Board: 1
- Vibration Sensor: 1
- Potentiometer Module: 2
- Ultrasonic Sensor: 1
- Water Level Sensor: 1
- Sound Sensor: 1
- Limit Switch Module: 2
- Soil Moisture Sensor: 1
- Buzzer Module: 1
- Colour Sensor: 1
- TFT Display (On Board): 1
- Push to Lock Switch Module: 2
- Radar (Motion) Sensor: 1
- Stepper Motor: 2
- Light Sensor: 1
- Magnetic Sensor: 1
- Moisture Sensor: 1
- Seven Segment Display: 1
- IR Sensor: 2
- Fan Module: 1
- LED Module: 2
- Servo Motor: 6
₹17,796.00IoT & AI Kit
₹17,796.00 -
Creality Ender 3 V2 3D Printer
It’s the same old Ender-3 3D Printer experience, improved with current hardware that includes a 32-bit mainboard, silent stepper motor drivers, a much cleaner appearance and design, plus plenty of other, smaller, touches.
Features:
- Integrated Compact Design
- Multiple improved upgrades
- Ultra silent printing
₹17,170.00Creality Ender 3 V2 3D Printer
₹17,170.00 -
Cretile Pioneer Kit – (45 Cretiles & Accessories)
Kit Contains 45 Cretiles and accessories:
- ProLogic: Arduino* based Programmable Cretile
- Battery/Power – 1
- Battery/Power – 2
- Push Button – 1
- Push Button – 2
- Switch
- Buzzer
- NOT Gate
- Dimmer
- Motion Sensor
- Light Sensor
- Light
- Motor – 1
- Motor – 2
- Copy
- Delay/pulse
- Receiver
- Transmitter
- U-Right
- Wire Module
- Submersible Water Pump
- Limit Switch
- Connectivity Sensor
- AND
- OR
- Toggle
- Servo Motor
- Servo Motor Driver
- High Speed Motor
- Sensor Base – 1
- Sensor Base – 2
- Obstacle Avoiding Sensor – 1
- Obstacle avoiding sensor – 2
- Sound Sensor
- Robotic Wheel – 1
- Robotic Wheel – 2
- Small wheel
- Pulley
- Pipe for Pump
- USB Rechargeable Battery 9V (500mah)
- Battery 9V – 1 (non-rechargeable)
- Battery 9V – 2 (non-rechargeable)
- OTG Adapter
- Fan Blade
- USB Cable
₹16,365.00 -
Creality LD-002R LCD Resin 3D Printer
Features
- “BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.
-  ANTI-ALIASING： MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
-  QUICK LEVELING： Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.
-  PERFORATED PRINT PLATE： Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.
-  AIR FILTER： A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.
₹15,922.22Creality LD-002R LCD Resin 3D Printer
₹15,922.22 -
Ender-3+ PLA White
- Easy and Quick Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Â Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrusion; V-Shape with POM wheels makes it move noiseless, smoothly, and durable.
-  Safety Protected Power Supply: Only needs 5 minutes for the hotbed to reach 110℃.
- Â It is a great project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics.
Modeling Technology : FDM（Fused Deposition Modeling） Printing Size : 220x220x250mm Printing Speed : 180mm/s Filament : 1.75mm PLA, TPU, ABS Working Mode : Online or SD offline Filament : White ₹15,460.00Ender-3+ PLA White
₹15,460.00 -
SDS1000 Series Economical Digital Oscilloscope
- Supports multi-language display and embedded help
- Screensaver from 1 minute to 5 hours
- Digital filter and waveform recorder function
- Shortcut storage function key
- 7-inch TFT-LCD display with 800 * 480 resolution
₹15,000.00 -
Ender 3 Pro 3D Printer – FDM DIY
- Ender 3 Pro 3D Printer comes with a high quality power supply,the heated bed can reach temperatures of 110℃ in just 5 minutes. MK10 Extrusion Mechanism:A brand-new patented infrastructure that effectively reduces the risk of plugging and poor spillage.
- Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly.
- Employs new magnetic self-adhesive platform sticker rather than traditional masking tape and glue for easy model picking-up,excellent adhesion and less printing cost.
- Simple Leveling Method: Larger Hand-turn Nut, Ergonomic Design, Enabling To Level the Platform More Quickly.
₹14,500.00Ender 3 Pro 3D Printer – FDM DIY
₹14,500.00 -
Anycubic I3 MEGA S – FDM 3D Printer
Features:
Printing Platform: Strong adhesive when platform’s hot and easy to remove when cool down.
Filament Sensor: Provides better printing experience of flexible
Fast Assembly: Only need to install 8 screws and connect 3 wires before the first print.
Rigid Metal Frame: The structure is very stable which could reduce the body shake druing printing and improve the printing quality
Suspended Filament Rack: One-piece hanging design, simple and beautiful. The feeding of filament is smoother and the storage of filament is more convenint.₹14,500.00Anycubic I3 MEGA S – FDM 3D Printer
₹14,500.00 -
Creality Ender 3 Neo FDM 3D Printer
FEATURES-
- 1. CR Touch for Easier Leveling- Self-developed CR Touch empowers auto-leveling by adjusting the height between the nozzle and platform, making leveling easier and more accurate.
- Â 2. Enjoy Quiet Printing- With a silent mainboard, low decibel has less impact on study or work, creating cozy printing atmosphere
- Â 3. Quick Heat Dissipation- The corrugated heat sink enlarges the radiating area. Quick heat dissipation vastly reduces the risk of tube blockage.
- Â 4. Full-metal Extruder for Smooth Feeding- The full-mental extruder is more durable. The stronger extrusion force enables smooth feeding.
- Â 5. Hands-on Fun: Independently assemble the printer and have fun. Modify a 3D printer, enjoy DIY.
- Â 6. Reliable Printing with Durable Build Surface: Durable carborundum build surface featured by even heating reduces the risk of warping. Strong adhesion ensures the stability and quality of the print.
- Â 7. Steadiness Enhanced by Mold Springs: Alloy steel mold springs of good toughness give better support to the platform, guaranteeing the printing quality.
- Â 8. No Fear of Outage: The resume printing function can accurately record the data and can resume the print from where it’s left off, avoiding printing failure and material wasting.
Heat Bed Temperature : up to 100℃ Build Surface : Carborundum Glass Extruders : Bowden extruders Extruder Material : Full-metal Leveling Mode : CR Touch Display : 12864 Mono Knob Screen Mainboard : 32-bit Silent Mainboard Resume Printing : Yes Rated Voltage : 100-120V~, 200-240V~, 50/60Hz Rated Power : 350W Slicing Software : Creality Slicer/Cura/Simplify3D Data Transmission Method : USB/TF Card 3D File Format : STL/OBJ/AMF Supported Filament : PLA/PETG/ABS ₹13,867.55Creality Ender 3 Neo FDM 3D Printer
₹13,867.55 -
Anycubic Kobra 2 Neo-3D Printer
Features of Anycubic Kobra 2 Neo :
- Â 5X Faster : 250mms Maximum Print Speed 150mms Recommended Print Speed 2500mm Accelerated Speed
- Â Upgraded Extrusion System : Upgraded extruder power reaches up to 60 watts quickly melts the filament in an enhanced flowability : Dual-geared extrusion structure accurately controls material delivery.
- Â Upgraded Cooling System : With an optimized dissipation design the cooling fan reaches up to 7000 rpm This ensures rapid cooling down of the models and a fast printing experience
- Â Auto-leveling Smart Z-Offset : Brand new upgraded Lev iQ 2 Automatic Leveling System in combination with tailored modular realize smart offset to the Z axis without manual adjustment Z Offset can be customed to cater to various printing needs.
- Â Double Metal Spindles and SG15 Bearing : Your prints will come out smooth and stable. Moreover the improved wear resistance of these moving components means you’ll need to replace them less frequently making your printing process more efficient and cost-effective.
- Â Stable Double Z axis Threaded Rod : The Z axis adopts a double-threaded rod structure lessening the lifting resistance while printing. It flattens the building platform and reduces the printing layers bringing excellent printing results even at a faster speed
- Â Easy Modular Assembly : Modular assembly has never been so easy 5 pieces 10 minutes done
- Â 4-3-inch Colored LCD Touchscreen : The 4-3-inch full-colored and sensitive LCD Touchscreen with comprehensive functions and settings offers a better printing experience.
- Â Magnetic Spring Steel Build Plate : The build plate sheet is scratch-resistant and wear-resistant making it easy to remove your prints after printing. With just a slight bend your prints come off the plate effortlessly.
- Â Filament Run-out Sensor : No worries about filament exhaustion or accidental power loss with the smart sensor. It can automatically detect these issues and pause printing, then resume once the issue has been resolved.
₹13,500.00Anycubic Kobra 2 Neo-3D Printer
₹13,500.00
