-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Aluminum GT2 Timing Pulley 36 Tooth 8mm Bore For 6mm Belt
- Outer Diameter: 25.5 mm.
- Inner Diameter: 8 mm.
- Width: 17 mm.
- Weight: 14 gm.
- Material: Aluminum.
- No. of teeth: 36 on each side
₹105.00 (excl. GST)Aluminum GT2 Timing Pulley 36 Tooth 8mm Bore For 6mm Belt
₹105.00 (excl. GST) -
Orange 11.1V 4500mAh 35C 3S Lithium Polymer Battery Pack
- Model No: ORANGE 4500 3S
- Voltage: 11.1V
- Max Continuous Discharge: 35C
- Balance Plug: JST-XH
- Discharge Plug: XT-60
₹3,131.00 (excl. GST)Orange 11.1V 4500mAh 35C 3S Lithium Polymer Battery Pack
₹3,131.00 (excl. GST) -
₹119.00 (excl. GST)Single-channel 5V 30A Relay Module Power Failure Relay
₹119.00 (excl. GST) -
400KV Step Up Power Module
Input Voltage: DC3.6V-6V
Input Current: 2A-5A
Output Voltage: DC 400KV (Please pay attention to safety when used)
Input Line Length: about 100mm (red is positive)
Output Line Length: about 160mm₹86.00 (excl. GST)400KV Step Up Power Module
₹86.00 (excl. GST) -
Anti-Corrosion Water Level Sensor with Ball Float Switch
- Rating contract (Max.): 10 W
- Switching power supply (Max.): 110VDC
- Resistance contract (Max.): 100 Ω
- Appro. Float Ball Size (mm) : 24×17 (LxD)
- Body Total Length (mm) : 85
- Cable Length (cm) : 37
- Total Float opening: 70°
- Switch ON/OFF angle Approx. betn 15° to 20°
₹87.00 (excl. GST)Anti-Corrosion Water Level Sensor with Ball Float Switch
₹87.00 (excl. GST) -
₹540.00 (excl. GST)Red 2WD Aluminum Smart Robot Car Chassis Kit DIY
₹540.00 (excl. GST) -
₹970.00 (excl. GST) -
MK4 Ultron Arduino Based Development Board
- The MK 4 is a specialized, high-quality Arduino-based development board designed for a variety of electronic projects and educational purposes.
- This board features the robust ATmega 328P microcontroller, ensuring reliable performance for both DIY enthusiasts and professionals.
- It comes with an integrated motor driver, making it perfect for robotics and automation projects.
- The MK 4 includes a built-in buzzer and power pins, enhancing its functionality.
- The fastest bootloader ensures quick and efficient start-up times.
- Additionally, the Type-C cable provided makes programming straightforward and convenient. Â
₹1,650.00 (excl. GST)MK4 Ultron Arduino Based Development Board
₹1,650.00 (excl. GST) -
Water Protection Level Sensor Photoelectric -ROBFS-IR02B Diameter 14MM
Water Protection Level Sensor
- Model: FS-IR02
- Type: Photoelectric Liquid Level Sensor
- Operating Voltage: 5V DC
- Output Current: 12mA
- Operating Temperature: – 25 ~ 105 °C
- Material: Polycarbonate
₹220.00 (excl. GST)Water Protection Level Sensor Photoelectric -ROBFS-IR02B Diameter 14MM
₹220.00 (excl. GST) -
Piezo Buzzer 15mm
- Clear sound
- Ultra-thin and lightweight
- No contacts: therefore, no noise and highly reliable
- Low power consumption for voltage type
- Excellent accessory for acoustic instrument pickups, stompboxes, contact mics, etc.
- Piezoelectric buzzer film. Can be fitted to used acoustic guitars, CBGs, drums, etc.
- 15mm brass outer diameter plate and ceramic inner diameter plate.
- All the discs are made from selected copper, ensuring excellent conductivity and long-lasting use.
₹15.00 (excl. GST)Piezo Buzzer 15mm
₹15.00 (excl. GST) -
MK3 Ultron Arduino Based Development Board
MK3 Ultron Arduino Based Development Board
The MK3 Utron Arduino Board is a specialized, high-quality Arduino-based development board designed for a variety of electronic projects and educational purposes. Made in India, this board features the robust ATmega 328P microcontroller, ensuring reliable performance for both DIY enthusiasts and professionals. It comes with an integrated motor driver, making it perfect for robotics and automation projects.
The MK3 Utron Arduino Board  includes a built-in buzzer and power pins, enhancing its functionality. The fastest bootloader ensures quick and efficient start-up times. Additionally, the Type-C cable provided makes programming straightforward and convenient.
₹1,250.00 (excl. GST)MK3 Ultron Arduino Based Development Board
₹1,250.00 (excl. GST)
