-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
5 Colors F5 MM LED Kit ORANGE 500PCS
Features:
- Low heat, energy-saving, low power consumption, long service life.
- Perfect for light decorations, LED Matrix, and Display Panel.
- Signal indicator and electronic and electrical experiment, including Arduino projects, etc.
₹294.00 (excl. GST)5 Colors F5 MM LED Kit ORANGE 500PCS
₹294.00 (excl. GST) -
Raspberry Pi Pico
Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash. A wide range of flexible I/O options includes I2C, SPI, and — uniquely — Programmable I/O (PIO). These support endless possible applications for this small and affordable package.
₹290.00 (excl. GST)Raspberry Pi Pico
₹290.00 (excl. GST) -
Force Sensor Resistor Square 38.1mm – Pressure Sensor
- Easily customizable to a wide range of sizes
- Cost-effective
- Ultra-thin; 0.45 mm
- Robust; up to 10 million actuations
- Simple and easy to Integrate.
₹290.00 (excl. GST)Force Sensor Resistor Square 38.1mm – Pressure Sensor
₹290.00 (excl. GST) -
Unsoldered GY-2561 TSL2561 Luminosity Sensor Light Intensity Module
1.Model: TSL2561
2.I2C interfaces
3.Power supply:3.3v to 5v
4.low supply current max: 0.6mA
₹285.00 (excl. GST)Unsoldered GY-2561 TSL2561 Luminosity Sensor Light Intensity Module
₹285.00 (excl. GST) -
5V 8 Channel Relay Module
Features:
- The 8550 transistor drive, drive ability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
₹285.00 (excl. GST)5V 8 Channel Relay Module
₹285.00 (excl. GST) -
Force Sensor – 0.5″ Force Sensitive Resistor
Features:-
Easily customizable to a wide range of sizes.
Cost-effective.
Ultra-thin: 0.45 mm.
Robust: up to 10 million actuations.
Simple and easy to Integrate.Applications:-
Testing and Measurement Equipment.
Embedded Electronics.
OEM Development Kit.
Consumer Electronics.
Multimeter.₹280.00 (excl. GST)Force Sensor – 0.5″ Force Sensitive Resistor
₹280.00 (excl. GST) -
Power Extension Board with 4IN+2UN+5MT FT-3513
Features-
Shock Proof ABS cabinet
Key holes for wall mounting
High conductivity for long life
Ultra durable heavy duty body
₹280.00 (excl. GST)Power Extension Board with 4IN+2UN+5MT FT-3513
₹280.00 (excl. GST) -
GY-51 LSM303DLH 3-Axis Magnetic Field Acceleration Module
Features:
- Integrated three-axis magnetometer and a tri-axial accelerometer with a digital interface.
- Comes with automatic detection.
- Also incorporates high-performance accelerometers.
- Accelerometers can run on LOW power mode.
₹276.00 (excl. GST)GY-51 LSM303DLH 3-Axis Magnetic Field Acceleration Module
₹276.00 (excl. GST) -
Foldscope Instrument
- Foldscope is the ultra-affordable, paper microscope that you assemble yourself. Designed to be extremely portable, durable, and to give optical quality similar to conventional research microscopes (magnification of 140X and 2-micron resolution), Foldscope brings hands-on microscopy to new places.
₹275.00 (excl. GST)Foldscope Instrument
₹275.00 (excl. GST) -
Digital Voltage Tester Meter
1.Model Number -Voltmeter usb
2.Measurement Range-3-7.5V
3.Type-Digital
4.Material-plastic
₹270.00 (excl. GST)Digital Voltage Tester Meter
₹270.00 (excl. GST) -
Plastic Gear Accessory Kit
Plastic Gear Accessory Kit
- Multipurpose gears and Pulley
- Four different types of propellors
- Rubber band
- Colorful kit
₹265.00 (excl. GST)Plastic Gear Accessory Kit
₹265.00 (excl. GST) -
Plastic Landing Gear for Quadcopter
Features :
- Good-Quality Gears
- Provides 200mm ground clearance
- Skid proof gears
- Compatible with Q450 and S500 and another large size frames
₹263.00 (excl. GST)Plastic Landing Gear for Quadcopter
₹263.00 (excl. GST)
