No products in the cart.
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (Price is Exclusive of GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0
₹60.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (Price is Exclusive of GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (Price is Exclusive of GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (Price is Exclusive of GST)
FRC connector Female 16 pin (Pack of 2)
- Gender: Female; Connector Type: IDC; Current Rating: 2A
- Mounting Type: Cable Mount; Number Of Contacts: 16; Number Of Rows: 2; Pitch: 2.54mm
- Contact Material: Phosphor Bronze; Housing Material: Thermoplastic
- Contact Plating: Nickel-plated terminals; Color: Black
- Minimum Operating Temperature: -65°C; Maximum Operating Temperature: +105°C
₹8.00 (Price is Exclusive of GST)FRC connector Female 16 pin (Pack of 2)
₹8.00 (Price is Exclusive of GST)5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
Features of Prusa i3 Desktop 3D Printer DIY Kit
- 3D flatbed printer.
- Acrylic Plate, more stable and durable.
- Support ABS, PLA, PVA, WOOD, and NYLON easy to use.
- Support SD card with LCD for off-line printing (Included with the printer).
- Support Bowden extruder.
- Can be used for printing different items like small components model, decoration etc.
- Special printing software, transfer the STL file to print file.
- Special frame design for you to see the printing process clearly.
- Can make true-to-life and high-resolution models and objects.
- Quiet while working.
- Max heated bed temperature about 110°C(adjustable).
- Max extruder temperature about 240°C.
₹19,371.00 (Price is Exclusive of GST)5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
₹19,371.00 (Price is Exclusive of GST)Original Prusa Mini+ 3D Printer Kit
Features:
- Silent Trinamic 2209 stepper drivers
- 3 thermistors, fan RPM sensors
- A Bowden system with3:1 gearing
- Super PINDA probe – no temperature drift
- Fast preheat: PLA 1 min / ASA 3 min
- Sensor less homing for X and Y axes
- 2.8″ graphic 65k color screen with G-Code preview
- Prusament PLA sample weight: ~2×25 g
₹58,644.00 (Price is Exclusive of GST)Original Prusa Mini+ 3D Printer Kit
₹58,644.00 (Price is Exclusive of GST)Original Prusa MK3S+ 3D Printer Kit
Features:
- Adapted to fit Prusa’s new filament sensor;
- Includes one Bondtech BMG extruder with a 3:1 gearing ratio;
- Optimized geometry for heat-sink cooling;
- Less moving weight to reduce vibration and ghosting;
- Professional SLS 3D printed housing.
₹73,830.00 (Price is Exclusive of GST)Original Prusa MK3S+ 3D Printer Kit
₹73,830.00 (Price is Exclusive of GST)Original Prusa SL1S Speed 3D Printer
For Newcomers and Professionals
The Prusa SL1S Speed 3D Printer is more than just a machine for producing figures and statues. With professional-level print quality, extensive documentation, low running costs and 24/7 tech support, the SL1S is perfect for newcomers and professionals alike. Its predecessor, the SL1, already found its way to hospitals and industrial companies.
High-Quality Materials and Rigid Body
We have built the Original Prusa SL1S Speed 3D Printer around a rigid, heavy aluminum body, which minimizes vibrations and ensures the best possible printing performance even when printing thin and highly detailed geometry. The SL1S features a quick-release mechanism, which maintains the Z-axis calibration.
Smart Resin Tank
The new tank from high-quality graphite-reinforced PA6 composite comes with a practical opaque lid that protects the resin from being cured by daylight. Automatic Resin Sensor prevents resin from overflowing or running out mid-print.
Slice with PrusaSlicer
The Prusa SL1S Speed 3D Printer is fully supported in the latest releases of PrusaSlicer, our internally developed and regularly updated slicing software. Take advantage of hollowing, automatic support generation, easy object manipulation and many other tools. PrusaSlicer also contains factory-tested profiles for dozens of resins.
Features:
- Quick-release platform – maintains calibration. No need to recalibrate the printer when the platform with the print is removed.
- Assisted Wizard with quick and easy setup and calibration
- Motorized tilting bed – prevents layer shifts, stirs the resin, enables faster printing, improves reliability
- Resin tank with non-proprietary FEP films – easy and cheap replacement, low running costs
- Silent operation with Trinamic drivers (auto-homing function)
- Advanced LCD cooling system improves performance and extends the life of internal components
- Rear fan with a carbon filter to minimize odors around the printer
- Safety features: resin level sensor, safety vat under the tilt mechanism to protect the internal parts against minor resin spills
- Fully-featured network interface: Control your printer through your web browser.
₹186,505.00 (Price is Exclusive of GST)Original Prusa SL1S Speed 3D Printer
₹186,505.00 (Price is Exclusive of GST)Anycubic Photon Mono SE 3D Printer
Features –
- Fast Printing, Saving Time — ANYCUBIC Photon Mono SE achieves fast printing, each layer of exposure can cure the resin in only 1 second, and the printing speed is MAX 80mm/h, which is 4 times that of ordinary color screens, which greatly improves the printing efficiency and saves time printing More models. The 6.08-inch 2K monochrome LCD has a longer service life and can print for more than 2000 hours.
- High Printing Accuracy, High Stability — Photon monose adopts 2k 6.08 inch black and white screen, 2560 * 1620 (2K) high resolution brings high precision printing, high light transmittance, and Z axis adopts double linear guide + screw motor +The combination of anti-backlash nut to improve the stability of the Z axis, so that the printing details can be vividly displayed, suitable for printing microcosms, with surprising fineness.
- WIFI Control, One-key Leveling — Download and use the Anycubic 3D application control to easily realize remote control of printing operations, real-time monitoring of printing progress, and adjustment of printing parameters at any time. The Anycubic Photon Mono SE 3D Printer is a pre-assembled printer, which can be assembled quickly and leveled easily. Just reset to zero → lock the platform, and leveling can be completed in two simple steps.
- Metal Frame, Sturdy and Durable — The all-metal one-piece housing and CNC machined aluminum body enable Photon Mono Se to reduce resonance, make printing more stable and improve printing accuracy. The printing platform is designed with a drawing process, which can enhance the adhesion, make it more stable during the printing process and eliminate the print layer pattern.
- Powerful Heat Dissipation System — Anycubic Photon Mono SE 3D Printer monose has a unique ultraviolet heat dissipation channel, effective cooling, helping to improve printing quality and service life. The print size is 130 x 78 x 160mm, which fits the size of various print models.
₹36,478.00 (Price is Exclusive of GST)Anycubic Photon Mono SE 3D Printer
₹36,478.00 (Price is Exclusive of GST)Flashforge Creator 4 3D Printer
Features-
1. Extruder temp. reaches 360℃, new independently designed nozzle, print more types of models with less temp. limitation.
2. Support to print in bi color and bi filament, promote printing efficiency sharply.
3. Build in HD camera, monitor printing status in long distance, check printing process real time.
4. Flexible and removable build plate, easy to remove precise model, much larger and bendable build plate.
5. Filament testing, stop printing automatically when testing abnormal filament feeding, ensure printing success rate.
6. 3D Cloud, an online platform, achieving Cloud management for 3D Printers and the uploading and storage of 3D printing files, providing a massive model database.
- 3D Printer Flashforge Creator 4S. Dual Extruder 400mm*350mm*500mm.
- Creator 4S: 0.4mm Extruder HT x2 + 0.6mm Nozzle Assembly HS x2 + Spring sheet x1
- Creator 4A: 0.4mm Extruder HT Already installed. Extruder HT Printing for Engineering Filament: PC / PA / PP / PETG / ASA / ABS / PLA / PC-ABS / PAHT
- Printing speed 200mm/s diameter 1.75mm printing temperature 320°C Extruder HS Printing for Carbon Fiber Composite: PACF / PET CF / PP CF / PA GF / PC ABS / PP GF / PPS CF / PPS
- Printing speed 150mm/s diameter 1.75mm printing temperature 360°C
₹1,504,700.00 (Price is Exclusive of GST)Flashforge Creator 4 3D Printer
₹1,504,700.00 (Price is Exclusive of GST)Flashforge Guider 3 3D Printer
The new machine structure design improves the utilization rate of the internal space of the equipment, realizes the expansion of the build volume while making the equipment occupying less space, offering flexible layout of the production line.
The entire frame adopts aluminum structure, and the enclosure adopts lightweight and durable ABS and acrylic sheets, which realizes the lightweight design from the inside out while ensuring stable printing as well.
- Excellent Printing Speed of up to 250mm/s
- Air Filtration
- Upgraded Automatic Leveling System
- Lightweight and Compact Design
- 300 x 250 x 340mm Build Volume
- Supported Filaments – ABS / PLA / PC / PA / HIPS / ASA / PETG / PA-CF / PLA-CF / PETG-CF /PETG-GF
- Close Design
- Auxiliary Leveling
- Filament Run Out Sensor
- Replaceable Print Bed
- Ultra Silence Design
- Continue Last Printing when Power Off
- Inbuilt Camera
- Wi-Fi, Ethernet, USB Stick Interface
- Air Filter Net
₹204,830.00 (Price is Exclusive of GST)Flashforge Guider 3 3D Printer
₹204,830.00 (Price is Exclusive of GST)Flashforge Creator 3 Pro
- New Extruder Structure and Heating Assembly Optimization
- Dual-fan Configuration: Controllable wind speed for better printing quality of engineering filaments
- New Heating Assembly Optimization: Integral detachable nozzle and heating assembly with easy maintenance and more convenient operation.
- New Extruder Sensor Upgrade Adjustment: It improves the success rate of leveling and makes the printing positioning more accurate. The heating speed of the platform is increased by 5 times. It takes only 3 minutes to heat up the build plate to 110℃.
₹189,039.00 (Price is Exclusive of GST)Flashforge Creator 3 Pro
₹189,039.00 (Price is Exclusive of GST)Flashforge Creator Pro 2
Features –
- – Touchscreen interface Closed printed chamber
- – Metal framework Stable working performance
- – Support multiple materials PLA, Pearl PLA, PVA, ABS, ABS Pro, HIPS
- – Independent dual extruder system Support mirror printing mode, duplicate printing
- mode and soluble printing mode.
- – Build volume 200*148*150mm
- – Nozzle Calibration – X-axis calibration to Y-axis calibration
₹79,150.00 (Price is Exclusive of GST)Flashforge Creator Pro 2
₹79,150.00 (Price is Exclusive of GST)Flashforge Adventurer 4
- Heated Build Plate Temperature: Up to 110°C (230°F) – Auto-Leveling Platform with An Aluminum Base
- Print Volume: 220 x 200 x 250 MM (8.7 x 7.9 x 9.8 IN) – Magnetic Removable Build Platform
- Print Precision: ±0.1 MM (Tested with 100 MM Cube) – Quick Release Nozzle with Ultra-Fast Heat up
- Nozzle Diameter: 0.4 MM (Default); 0.6 MM & 0.3 MM (Optional) – Compatible with PLA, PETG, ABS, PC, PLA-CF, PETG-CF / Compatible with FlashForge 0.3 MM, 0.4 MM, and 0.6 MM Nozzles
- Fully Enclosed Printing Chamber & HEPA 13H Air Filter System Manage series of Adventurer 4 3D Printers remotely for ultra-efficiency with high output, scale-up, or do your production at will
₹64,547.00 (Price is Exclusive of GST)Flashforge Adventurer 4
₹64,547.00 (Price is Exclusive of GST)Anycubic Kobra 2 Neo-3D Printer
Features of Anycubic Kobra 2 Neo :
- 5X Faster : 250mms Maximum Print Speed 150mms Recommended Print Speed 2500mm Accelerated Speed
- Upgraded Extrusion System : Upgraded extruder power reaches up to 60 watts quickly melts the filament in an enhanced flowability : Dual-geared extrusion structure accurately controls material delivery.
- Upgraded Cooling System : With an optimized dissipation design the cooling fan reaches up to 7000 rpm This ensures rapid cooling down of the models and a fast printing experience
- Auto-leveling Smart Z-Offset : Brand new upgraded Lev iQ 2 Automatic Leveling System in combination with tailored modular realize smart offset to the Z axis without manual adjustment Z Offset can be customed to cater to various printing needs.
- Double Metal Spindles and SG15 Bearing : Your prints will come out smooth and stable. Moreover the improved wear resistance of these moving components means you’ll need to replace them less frequently making your printing process more efficient and cost-effective.
- Stable Double Z axis Threaded Rod : The Z axis adopts a double-threaded rod structure lessening the lifting resistance while printing. It flattens the building platform and reduces the printing layers bringing excellent printing results even at a faster speed
- Easy Modular Assembly : Modular assembly has never been so easy 5 pieces 10 minutes done
- 4-3-inch Colored LCD Touchscreen : The 4-3-inch full-colored and sensitive LCD Touchscreen with comprehensive functions and settings offers a better printing experience.
- Magnetic Spring Steel Build Plate : The build plate sheet is scratch-resistant and wear-resistant making it easy to remove your prints after printing. With just a slight bend your prints come off the plate effortlessly.
- Filament Run-out Sensor : No worries about filament exhaustion or accidental power loss with the smart sensor. It can automatically detect these issues and pause printing, then resume once the issue has been resolved.
₹13,500.00 (Price is Exclusive of GST)Anycubic Kobra 2 Neo-3D Printer
₹13,500.00 (Price is Exclusive of GST)
