-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
External Nose Circlip Plier – 5 inch -84-332-23
- Limited lifetime warranty offered on the product
- This product comes in a proper packaging
- The first clamp fine polishing and processing blackening, good looking
₹350.00 (excl. GST)External Nose Circlip Plier – 5 inch -84-332-23
₹350.00 (excl. GST) -
F450 F550 Frame Landing Gear Landing Skid
-
Footstool product description :
- Four inner six angle cylinder head screw M3*12
- Four inner six angle cylinder head screw M2.5*12
- Four cover nut M3
- Four glass fiber tube M8*5*330
- Four multi-axis tripod cushion D8(black and yellow)
- Four half-round head cap D8
₹754.00 (excl. GST)F450 F550 Frame Landing Gear Landing Skid
₹754.00 (excl. GST) -
-
Female DC Power Jack Supply Socket Plug
- Plug Type: 5.5 x 2.1mm
- Pin: 3
- Temperature: -30°C ~ +70°C.
- Rated load: up to DC 30V / 1.0A
- Contact resistance: ≤0.03.
- Insulation resistance: ≥100 MΩ.
₹4.00₹6.00(excl. GST)Female DC Power Jack Supply Socket Plug
₹4.00₹6.00(excl. GST) -
FGL60N100BNTD Trench IGBT
Features:
- High Speed switching
- Low saturation Voltage
- Hight Input impedance
- Built-in Fast recovery diode
₹349.00 (excl. GST)FGL60N100BNTD Trench IGBT
₹349.00 (excl. GST) -
File Set 6 Inch
- Multi-purpose Files
- Can be used to file a flat surface, for filing wood and metal, to remove rust on metal surfaces, sharpening knives, carving siphorex/wood, etc.
₹350.00 (excl. GST)File Set 6 Inch
₹350.00 (excl. GST) -
Flame Induction Fan kit School Science DIY Kit
Age Range : 8 to 13 YearsOEM & ODM : Available₹545.00 (excl. GST)Flame Induction Fan kit School Science DIY Kit
₹545.00 (excl. GST) -
Flame Sensor infrared Receiver Ignition source detection module
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
₹19.00 (excl. GST)Flame Sensor infrared Receiver Ignition source detection module
₹19.00 (excl. GST) -
Flashforge Adventure 3 FDM- 3D Printer
Flashforge Adventure 3 Features:
Screen 2.8-inch touch screen Input 100-240 VAC,47-63Hz Internal Storage 8 GB Data Transmission USB stick,Wi-Fi,Ethernet,FlashCloud,Polar Cloud Software FlashPrint Software Input 3MF/STL/OBJ/JPG/JPEG files Camera 1 Filter Fan External ₹54,000.00 (excl. GST)Flashforge Adventure 3 FDM- 3D Printer
₹54,000.00 (excl. GST) -
Flashforge Adventurer 4
-  Heated Build Plate Temperature: Up to 110°C (230°F) – Auto-Leveling Platform with An Aluminum Base
- Â Print Volume: 220 x 200 x 250 MM (8.7 x 7.9 x 9.8 IN) – Magnetic Removable Build Platform
-  Print Precision: ±0.1 MM (Tested with 100 MM Cube) – Quick Release Nozzle with Ultra-Fast Heat up
- Â Nozzle Diameter: 0.4 MM (Default); 0.6 MM & 0.3 MM (Optional) – Compatible with PLA, PETG, ABS, PC, PLA-CF, PETG-CF / Compatible with FlashForge 0.3 MM, 0.4 MM, and 0.6 MM Nozzles
- Â Fully Enclosed Printing Chamber & HEPA 13H Air Filter System Manage series of Adventurer 4 3D Printers remotely for ultra-efficiency with high output, scale-up, or do your production at will
₹64,547.00 (excl. GST)Flashforge Adventurer 4
₹64,547.00 (excl. GST) -
Flashforge Creator 3 Pro
- Â New Extruder Structure and Heating Assembly Optimization
- Â Dual-fan Configuration: Controllable wind speed for better printing quality of engineering filaments
- Â New Heating Assembly Optimization: Integral detachable nozzle and heating assembly with easy maintenance and more convenient operation.
-  New Extruder Sensor Upgrade Adjustment: It improves the success rate of leveling and makes the printing positioning more accurate. The heating speed of the platform is increased by 5 times. It takes only 3 minutes to heat up the build plate to 110℃.
₹189,039.00 (excl. GST)Flashforge Creator 3 Pro
₹189,039.00 (excl. GST) -
Flashforge Creator 4 3D Printer
Features-
1. Extruder temp. reaches 360℃, new independently designed nozzle, print more types of models with less temp. limitation.
2. Support to print in bi color and bi filament, promote printing efficiency sharply.
3. Build in HD camera, monitor printing status in long distance, check printing process real time.
4. Flexible and removable build plate, easy to remove precise model, much larger and bendable build plate.
5. Filament testing, stop printing automatically when testing abnormal filament feeding, ensure printing success rate.
6. 3D Cloud, an online platform, achieving Cloud management for 3D Printers and the uploading and storage of 3D printing files, providing a massive model database.
- 3D Printer Flashforge Creator 4S. Dual Extruder 400mm*350mm*500mm.
- Creator 4S: 0.4mm Extruder HT x2 + 0.6mm Nozzle Assembly HS x2 + Spring sheet x1
- Creator 4A: 0.4mm Extruder HT Already installed. Extruder HT Printing for Engineering Filament: PC / PA / PP / PETG / ASA / ABS / PLA / PC-ABS / PAHT
- Printing speed 200mm/s diameter 1.75mm printing temperature 320°C Extruder HS Printing for Carbon Fiber Composite: PACF / PET CF / PP CF / PA GF / PC ABS / PP GF / PPS CF / PPS
- Printing speed 150mm/s diameter 1.75mm printing temperature 360°C
₹1,504,700.00 (excl. GST)Flashforge Creator 4 3D Printer
₹1,504,700.00 (excl. GST)
