No products in the cart.
Gas Detection Alarm Sensor DIY Kit
Function Description:
With the continuous improvement of people’s living standards, gas and natural gas have entered thousands of households, bringing convenience to everyone but also posing many safety hazards. Gas poisoning accidents also occur from time to time. Therefore, we must conduct regular inspections of areas where gas leakage may occur. The gas detection and alarm circuit is composed of gas sensor MQ5, voltage comparator LM393, voice chip COO2, and other components. It can detect combustible gases in the air and automatically sound and light alarms₹225.00 (Price is Exclusive of GST)Gas Detection Alarm Sensor DIY Kit
₹225.00 (Price is Exclusive of GST)High Current Active Alarm Buzzer Driver Module
- Operating voltage 3.3V-5V
- PCB Dimension: 3.1cm*1.3cm.
- Color: Blue
- Easy to use
₹32.00 (Price is Exclusive of GST)High Current Active Alarm Buzzer Driver Module
₹32.00 (Price is Exclusive of GST)Creality Ender 5 Plus 3D Printer
Features:
- Cubic-like Frame designed
- Ultra Large Printing Format
- Stable Printing
- Filament Sensor
- Resume printing Function
₹47,576.00 (Price is Exclusive of GST)Creality Ender 5 Plus 3D Printer
₹47,576.00 (Price is Exclusive of GST)DC Female jack connector
Features:
- It is a perfect solution for those who want to make custom power cable.
- This CCTV Camera DC Power Connector will provide a great connection.
Female Jack Description:
- 5.5mm x 2.1mm Female power plug connector.
- The external diameter of the plug: 5.5mm.
- The internal diameter of the plug: 2.1mm.
- Dimension: 38mm(L) x 14mm(W) x 13mm(H).
₹15.00 (Price is Exclusive of GST)DC Female jack connector
₹15.00 (Price is Exclusive of GST)3.3V/5V MB102 Breadboard Power Supply Module
Features :
- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
₹46.00 (Price is Exclusive of GST)3.3V/5V MB102 Breadboard Power Supply Module
₹46.00 (Price is Exclusive of GST)LX-103 Light Meter Luxmeter, Measures Up-To 2,00,000 LUX/20,000 FC
Features Of HTC LX-103 Digital Lux Meter:
- Large Range up to 200000Lux
- Large LCD Display with Back Light and Bar Graph
- Auto Power Off
- MAX/MIN and Data Hold
₹2,015.00 (Price is Exclusive of GST)LX-103 Light Meter Luxmeter, Measures Up-To 2,00,000 LUX/20,000 FC
₹2,015.00 (Price is Exclusive of GST)ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
Features :
ESP32-CAM :
- The smallest 802.11b/g/n Wi-Fi BT SoC module.
- Low power 32-bit CPU, can also serve the application processor.
- Up to 160MHz clock speed, summary computing power up to 600 DMIPS.
- Built-in 520 KB SRAM, external 4MPSRAM.
- Supports UART/SPI/I2C/PWM/ADC/DAC.
- Support OV2640 and OV7670 cameras, built-in flash lamp.
- Support image WiFI upload.
- Supports TF card.
- Supports multiple sleep modes.
- Embedded Lwip and FreeRTOS.
- Supports STA/AP/STA+AP operation mode.
- Support Smart Config/AirKiss technology.
- Support for serial port local and remote firmware upgrades (FOTA).
Specifications :
- Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM.
- External Storage: micro SD card slot up to 4GB.
- Camera
- FPC connector.
- Support for OV2640 (sold with a board) or OV7670 cameras.
- Image Format: JPEG( OV2640 support only ), BMP, grayscale.
- LED flashlight.
- Expansion: 16x through-holes with UART, SPI, I2C, PWM.
- Misc: Reset button.
- Power Supply: 5V via pin header.
- Power Consumption.
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
- Dimensions (ESP32): 40 x 27 x 12 (LxWxH) mm.
- Temperature Range: Operating: -20 ℃ ~ 85 ℃; storage: -40 ℃ ~ 90 ℃ @ < 90%RH.
₹519.00 (Price is Exclusive of GST)ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
₹519.00 (Price is Exclusive of GST)30A Intelligent LCD Solar Controller
Features:
- Built-In Industrial Micro Controller
- Big LCD Display
- Full 4 Stage PWM Charge Management
- Dual MOSFET Reverse Current Protection
- Low Heat Production
₹376.00 (Price is Exclusive of GST)30A Intelligent LCD Solar Controller
₹376.00 (Price is Exclusive of GST)Voltage Detection Sensor Module 25V
Features :
- Output Interface: “+ ” connected 5/3.3V, “-” connected GND, “s” connected Arduino AD pins
- DC input interface: red terminal positive with VCC, negative with GND
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino, not only makes it easier for you to detect voltage battery.
₹13.00 (Price is Exclusive of GST)Voltage Detection Sensor Module 25V
₹13.00 (Price is Exclusive of GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Red
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature:200-220℃
- Bed Temperature:0-70℃
- Printing Speed:30~90mm/s
- Movement Speed :90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (Price is Exclusive of GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Red
₹1,090.00 (Price is Exclusive of GST)10mm LDR Sensor Photoresistor Photo Cell 50-100k – GL10539
Feature:
- Epoxy encapsulation
- Good reliability
- Small size
- High sensitivity
- Fast response
- Good spectral characteristics
₹33.00 (Price is Exclusive of GST)10mm LDR Sensor Photoresistor Photo Cell 50-100k – GL10539
₹33.00 (Price is Exclusive of GST)Glue Gun 20 WATT 7MM HOT MELT
- Suitable for paper and crafts purposes only
- Glue gun will not heat up enough to melt glue in AC
- Take 5 to 8 minutes to heat
- Compatible glue stick thickness: 11 mm
₹173.00 (Price is Exclusive of GST)Glue Gun 20 WATT 7MM HOT MELT
₹173.00 (Price is Exclusive of GST)