Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹390.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)
LM358DR SOIC-8 High Gain Operational Amplifier
Features:
- Single supply voltage from 3V to 32V and dual supply range from ±1.5V to ±16V
- Slew rate at unity gain is 0.3 V/µs
- Wide unity gain bandwidth of 0.7MHz
- Low drain supply current is 0.7mA independent of supply voltage
- Input offset voltage of 3mV
- Input offset current of 2nA
- Input bias current of -20nA
- Differential input voltage range equal to the maximum rated supply voltage of 32V
- Common mode rejection ratio (CMRR) of 80dB
- Operating temperature range from 0°C to 70°C
- Applications: Signal Processing, Sensing & Instrumentation, Consumer Electronics, Portable Devices, Motor Drive & Control
₹39.00 (Price is Exclusive of GST)LM358DR SOIC-8 High Gain Operational Amplifier
₹39.00 (Price is Exclusive of GST)PCB Drill bit
Drill bit Applications:
- Drilling PCBs
- Drilling ornaments
- Drilling thin Aluminium plates
Drill bit specification:
- 0.8mm diameter
- High quality stainless steel
- Long term durability
- Good for though surfaces
₹12.00 (Price is Exclusive of GST)PCB Drill bit
₹12.00 (Price is Exclusive of GST)Glue Gun 20 WATT 7MM HOT MELT
- Suitable for paper and crafts purposes only
- Glue gun will not heat up enough to melt glue in AC
- Take 5 to 8 minutes to heat
- Compatible glue stick thickness: 11 mm
₹173.00 (Price is Exclusive of GST)Glue Gun 20 WATT 7MM HOT MELT
₹173.00 (Price is Exclusive of GST)YiHua 995D Hot Air Blower with Soldering Iron
The temperature fluctuation range ±1°C. Working Temperature Adjustable from 100 – 250 to 500C. Iron soldering station adapt to correct a temperature deviation caused by the environmental impact or replacement of heating elements, fans, soldering irons etc. The temperature range is corrected: ±50C.
Digital Display: With LED Screen digital display, shows temperature so you can easy control the temperature. Easy to deal with large joints, small spots and solder joint de-soldering. Operation Parameters Rated voltage 220V 50Hz Total Power 50W +/-10% Constant Temperature Power.
₹12,500.00 (Price is Exclusive of GST)YiHua 995D Hot Air Blower with Soldering Iron
₹12,500.00 (Price is Exclusive of GST)PCB Power Drill Machine
Features:
- Model – MB140
- Key-pin chuck
- Chuck capacity 0.4 to 1.0mm; 2.1 to 2.5mm
- Operating Voltage – 0 to 18 volts (D.C.)
- Ergonomic design includes a pencil grip for comfort
- Motor is fan cooled for long periods of use and longevity
- Overall length: 170mm (approx)
- RPM: 0 – 30,000 rpm
- Collete – (0mm) 1piece; (2.3mm) 1piece
- Weight: ~275grams
₹800.00 (Price is Exclusive of GST)PCB Power Drill Machine
₹800.00 (Price is Exclusive of GST)- ₹300.00 (Price is Exclusive of GST)
PCB Hand Held Drill Machine
₹300.00 (Price is Exclusive of GST) INGCO 2000 W Patented Metal Power and Hand Tools Heat Gun with Soft Rubber Grip
- Material: Others
- Item Dimension: 700 x 600 x 300 cm
- No Warranty
- INGCO Heat Gun 2000W
- Two speed setting, Thermal protection, Comes with 4 different nozzles & 1pcs scraper
- Material: Metal & Plastic with rubber grip, Color: Orange & Black
- Anti-burn design: the use of three-storey insulation design,can keep the user away from burns,Solidly made and work fine:this gun is made by quality materials
- Heat up quickly:this gun take advantage of double heating wire to achieve fast heating, the display will show real-time temperature
₹3,000.00 (Price is Exclusive of GST)INGCO 2000 W Patented Metal Power and Hand Tools Heat Gun with Soft Rubber Grip
₹3,000.00 (Price is Exclusive of GST)G1200 1200 x 12MP Multipurpose Digital Electronic Microscope with 7″ LCD Display
Save & output of Images and Videos: This LCD Screen digital microscope is equipped with a Micro SD card slot and 32G of the card. You can save the images and videos obtained during your observations to the 32G tf card and output.(Maximum support for 64G Micro SD cards)
Great Gift : This LCD digital microscope is perfect for circuit board inspection, QC inspection, watch/clock repair, textile industrial, kids education inspection, biological observation (not suitable for cells), medical professionals, scientific researchers, insects, coins, jewelry, and stamps. It’s the best gift for children, students, hobbyists, and other users.
₹9,500.00 (Price is Exclusive of GST)G1200 1200 x 12MP Multipurpose Digital Electronic Microscope with 7″ LCD Display
₹9,500.00 (Price is Exclusive of GST)Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
Features:
- Easy to use
- Easily Replaceable
₹140.00 (Price is Exclusive of GST)Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
₹140.00 (Price is Exclusive of GST)Original Arduino Nano
Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with a smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
This new version 3.0 comes with ATMEGA328 which offers more programming and data memory space. It is two layers. That makes it easier to hack and more affordable.
You end up paying less with Nano than Mini and USB combined.
₹1,476.00 (Price is Exclusive of GST)Original Arduino Nano
₹1,476.00 (Price is Exclusive of GST)Original Arduino Uno Rev3
The Original Arduino Uno Rev3 board is the first in a series of USB Arduino boards and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.
₹1,625.00 (Price is Exclusive of GST)Original Arduino Uno Rev3
₹1,625.00 (Price is Exclusive of GST)XH-M603 HW-632 Charging Control Module With LED Display
Features:
- Automatic control circuit connection
- Automatic charging and power off
- Real-time voltage monitor
- Autosave setting
- ST core chip
- LM2596 switch voltage regulator
₹325.00 (Price is Exclusive of GST)XH-M603 HW-632 Charging Control Module With LED Display
₹325.00 (Price is Exclusive of GST)
