No products in the cart.
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (Price is Exclusive of GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (Price is Exclusive of GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(Price is Exclusive of GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(Price is Exclusive of GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (Price is Exclusive of GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (Price is Exclusive of GST)
4 in 1 Soil PH Meter Soil Tester PH Moisture Meter Temperature Sunlight Measurement Analysis Acidity Alkali（Without Battery）
Features:
- Four different soil test meters in one device; Measures moisture, pH/Acidity, Temperature, and light.
- 100% Accuracy; Easy to read moisture, pH, and light levels; Perfect monitor for growing healthy plants.
- Takes the guesswork out of gardening; Know exactly when to water, amend your soil or adjust the lighting.
- Compact, portable & easy to use, just plug and use; Compact soil meter works indoor/outdoors.
- Save water, energy and keep your plants, lawn, flower in top condition.
- Measures moisture at the root level.
- Power Saving function to keep battery long-lasting
- With a 200 mm Single probe easy to rotate the display side for convenient sight
₹604.00₹799.00(Price is Exclusive of GST)4 in 1 Soil PH Meter Soil Tester PH Moisture Meter Temperature Sunlight Measurement Analysis Acidity Alkali（Without Battery）
₹604.00₹799.00(Price is Exclusive of GST)Emax ECOII-2004-3000KV Brushless Motor
Features:
- NSK precision bearing
- Base casing : Al 7075
- Rotor : N52SH arc magnets
- Steel shaft
- 12*12mm hole pattern
- Multi-strand winding
- 120mm 24 AWG silicone wire
Specifications:
- KV: 3000
- Framework: 12N14P
- Length: 19.2mm
- Diameter: 24.7mm
- Cells: 4-6S
- Propeller: 4″-5″
- Prop adapter Shaft Thread: 1.5mm
- Bearing Shaft: 3mm
- Bolt Pattern: M2 (12x12mm)
- Maximum Thrust: 1170g(on4s)
- Peak Current (6S): 32A
₹1,180.00₹1,599.00(Price is Exclusive of GST)Emax ECOII-2004-3000KV Brushless Motor
₹1,180.00₹1,599.00(Price is Exclusive of GST)Orange 7.4V 1000mAh 30C 2S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹795.00₹899.00(Price is Exclusive of GST)Orange 7.4V 1000mAh 30C 2S Lithium Polymer Battery Pack
₹795.00₹899.00(Price is Exclusive of GST)Orange 3.7V 1000mAh 30C 1S Lithium Polymer Battery Pack
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Very Lightweight?and Portable.
- Low-cost High performance.
- Good thermal efficiency.
- Minimum weight in Class.
₹544.00₹799.00(Price is Exclusive of GST)Orange 3.7V 1000mAh 30C 1S Lithium Polymer Battery Pack
₹544.00₹799.00(Price is Exclusive of GST)HX770 Vmax Aircraft 6-AXIS GYRO QUADCOPTER Drone
- HX770 GYRO QUADCOPTER Drone toy Quadcopter Material: ABS, metal Item size: 17*17*4.5 cm Frequency: 2.4G Quadcopter weight(with battery): 33g Flying Height: 30 meters max Controlling distance: 30 meters
- Battery for controller: 4*”AA” batteries(not included) Battery for quadcopter: 3.7V 220mAh Li-poly
- Charging Time: about 30 minutes
- Flying time: about 6-9 minutes For customer satisfaction, each piece is quality tested against any manufacturing defect, Note that it is a delicate product may need practice for best control. Important Note: Only for 14+ age, must be used in Adults Supervision.
- Function: 360-degree flips in all directions, fancy rotation, different speed mode, fantasy light Package Contents: 1 x HX 770 toy Drone 1 x 3.7V 220mAH battery 1 x Transmitter 2 x Propeller 1 x Manual.
- 360° Roll-Over: The simple flying of WSAD is too boring, and the new 3D rolling special effects surprise all the people.
- 6 Channel Stable Remote-Control Quadcopter Drone, Very Fun To Fly And Has A Great Control On The Copter.
₹1,600.00₹1,980.00(Price is Exclusive of GST)HX770 Vmax Aircraft 6-AXIS GYRO QUADCOPTER Drone
₹1,600.00₹1,980.00(Price is Exclusive of GST)SeeedStudio Grove GPS (Air530)
Features:
- Positioning error within 10 meters
- Multi-mode satellite positioning & navigation and support more than 6 satellites at the same time
- The position still quickly and accurately under the condition of bad signal
- Low power consumption at only 31uA
- Compatible hard/soft interface for other modules
- Adopt the integrated design of RF baseband, which integrates DC/DC, LDO, LNA, RF front-end, baseband processing, 32-bit RISC based chip, RAM, FLASH storage, RTC and power management functions
- Cost-effective
- Compact size for easy deployment
₹1,378.00 (Price is Exclusive of GST)SeeedStudio Grove GPS (Air530)
₹1,378.00 (Price is Exclusive of GST)
ESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
Features:
- High performance-price ratio
- Small volume, easily embedded to other products
- Strong function with support LWIP protocol, Freertos
- Supporting three modes: AP, STA, and AP+STA
- Supporting Lua program, easily to develop
₹285.00 (Price is Exclusive of GST)ESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
₹285.00 (Price is Exclusive of GST)Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Wheatstone bridge formation of Load Cell:
HX711 (24 bit Analog to Digital Converter)
HX 711 is a precision 24-bit analog to digital converter (ADC) specially designed for Weigh scales and industrial control applications to interface directly with a bridge sensor.
Simply connect Load cell wires to the HX711 module based on their color, then connect DAT (Data) pin to Arduino Analog pin A1 and connect CLK (Clock) pin to Arduin0 Analog pin A0, Put Vcc and GND supply from Arduino power source pins.
₹222.00 (Price is Exclusive of GST)Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
₹222.00 (Price is Exclusive of GST)Creality Ender-3 FDM 3D Printer + PLA Black
- Easy and Quick Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrusion; V-Shape with POM wheels makes it move noiseless, smoothly, and durable.
- Safety Protected Power Supply: Only needs 5 minutes for the hotbed to reach 110℃.
- It is a great project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics.
Modeling Technology : FDM(Fused Deposition Modeling） Printing Size : 220x220x250mm Printing Speed : 180mm/s Filament : 1.75mm PLA, TPU, ABS Working Mode : Online or SD offline Filament : White ₹12,898.00 (Price is Exclusive of GST)Creality Ender-3 FDM 3D Printer + PLA Black
₹12,898.00 (Price is Exclusive of GST)Orange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
Features :
- Grade A Quality branded Johnson DC Motor.
- It has sturdy construction.
- Shaft equips metal bushes for long life.
- It comes with High-Quality gears.
- The shaft has a hole for better coupling.
₹400.00 (Price is Exclusive of GST)Orange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
₹400.00 (Price is Exclusive of GST)23Teeth Straight Bevel Plastic Gear ID 10mm Round
Applications of bevel gears are as follows:
- They are used in differential drives, which can transmit power to two axles spinning at different speeds, as as those on a cornering automobile
- Bevel gears are used as the main mechanism for hand drills. The bevel gears have added an advantage of increasing the speed of rotation of the chuck and this makes it possible to drill a range of materials.
- Standard bevel gears are mainly used in low speed applications.
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹40.00 (Price is Exclusive of GST)23Teeth Straight Bevel Plastic Gear ID 10mm Round
₹40.00 (Price is Exclusive of GST)23Teeth Straight Bevel Plastic Gear ID 8mm Round
Applications of bevel gears are as follows:
- They are used in differential drives, which can transmit power to two axles spinning at different speeds, as as those on a cornering automobile
- Bevel gears are used as the main mechanism for hand drills. The bevel gears have added an advantage of increasing the speed of rotation of the chuck and this makes it possible to drill a range of materials.
- Standard bevel gears are mainly used in low speed applications.
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹40.00 (Price is Exclusive of GST)23Teeth Straight Bevel Plastic Gear ID 8mm Round
₹40.00 (Price is Exclusive of GST)
